Ноутбук: Asus K50ID
OS: KUbuntu 11.04
Ядро: 2.6.38 x86_32
Привод: HL DT ST DVD RAM GT30N
Софт: K3B, Nero Linux 4, Brasero, Gnomebaker
Диски: DVD+/- R/RW; CD+/- R/RW.
Производители: Verbatium, SmartBuy, SmartTrack и другие.
Пользователь состоит в группе cdrom.
Просто не записывает. Не может получить доступа к приводу, как я понимаю из лога.
K3B предлагает режим DAO - не помогает.
В k3bsetup:
Собственно, комбинации параметров не помогают.
Куски логов:
k3b:
Devices
-----------------------
HL-DT-ST DVDRAM GT30N AS02 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, Последовательный DVD-R, Двухслойный последовательный DVD-R, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW с ограниченной перезаписью, Последовательный DVD-RW, DVD+RW, DVD+R, Двухслойный DVD+R, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Ограниченная перезапись, Layer Jump] [%7]
HUAWEI Mass Storage 2.31 (/dev/sr1, CD-ROM) [Ошибка] [Нет] [%7]
K3b::IsoImager
-----------------------
mkisofs print size result: 5291 (10835968 bytes)
System
-----------------------
K3b Version: 2.0.2
KDE Version: 4.7.2 (4.7.2)
QT Version: 4.7.2
Kernel: 2.6.38-8-generic-pae
Used versions
-----------------------
mkisofs: 1.1.11
cdrecord: 1.1.11
cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 3 = CD-ROM XA mode 2
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVDRAM GT30N '
Revision : 'AS02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A (CD-RW)
Profile: 0x0012 (DVD-RAM)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW) (current)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 327680 = 320 KB
FIFO size : 12582912 = 12288 KB
Speed set to 1764 KB/s
Track 01: data 10 MB
Total size: 11 MB (01:10.57) = 5293 sectors
Lout start: 12 MB (01:12/43) = 5293 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 3
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11635 (97:26/65)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 4 1T speed high: 10
2T speed low: 4 2T speed high: 0 (reserved val 6)
power mult factor: 1 5
recommended erase/write power: 3
A1 values: 24 1A BC
A2 values: 26 B2 26
Disk type: Phase change
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 354556
Starting to write CD/DVD at speed 10.0 in real TAO mode for multi session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01: 0 of 10 MB written.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 03 00 00
Sense Key: 0x0 No Additional Sense, Segment 11
Sense Code: 0x00 Qual 0x03 (setmark detected) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 4.096s timeout 40s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 0 bytes
Writing time: 9.132s
Average write speed 7.7x.
Fixating...
Errno: 5 (Input/output error), close track/session scsi sendcmd: no error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 04 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x04 (current program area is empty) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 480s
=== last message repeated 2 times. ===
/usr/bin/wodim: Cannot fixate disk.
Fixating time: 0.002s
/usr/bin/wodim: fifo had 171 puts and 1 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=10 -tao driveropts=burnfree -multi -xa -tsize=5291s -
mkisofs
-----------------------
5291
I: -input-charset not specified, using utf-8 (detected in locale settings)
9.66% done, estimate finish Mon Jan 16 16:12:54 2012
19.03% done, estimate finish Mon Jan 16 16:12:44 2012
28.41% done, estimate finish Mon Jan 16 16:12:41 2012
38.08% done, estimate finish Mon Jan 16 16:12:39 2012
47.46% done, estimate finish Mon Jan 16 16:12:38 2012
56.83% done, estimate finish Mon Jan 16 16:12:37 2012
66.21% done, estimate finish Mon Jan 16 16:12:37 2012
75.88% done, estimate finish Mon Jan 16 16:12:36 2012
85.26% done, estimate finish Mon Jan 16 16:12:36 2012
94.63% done, estimate finish Mon Jan 16 16:12:36 2012
Total translation table size: 0
Total rockridge attributes bytes: 256
Total directory bytes: 376
Path table size(bytes): 10
Max brk space used 0
5291 extents written (10 MB)
mkisofs calculate size command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid Ubuntu. Mix -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-egor/k3bf24141.tmp -rational-rock -hide-list /tmp/kde-egor/k3bp24141.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-egor/k3bh24141.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/kde-egor/k3bj24141.tmp
mkisofs command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -volid Ubuntu. Mix -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-egor/k3bY24141.tmp -rational-rock -hide-list /tmp/kde-egor/k3bI24141.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-egor/k3bW24141.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/kde-egor/k3bx24141.tmp
Nero Linux:
Linux (Ubuntu 11.04 'natty') 2.6.38-8-generic-pae (i686)
Nero API version: 9.7.0.132
Using interface version: 9.0.1.4
Installed in: /usr/lib/nero/
Application: Nero AG\Nero Linux Express
Internal Version: 9, 7, 0, 132
Recorder: <HL-DT-ST DVDRAM GT30N> Version: AS02 - HA 1 TA 0 - 0.0.0.0
Adapter driver: <ahci> HA 1
Drive buffer : 1024kB
Bus Type : via Inquiry data
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 3898MB (3992520kB)
Free physical memory: 1006MB (1030440kB)
Memory in use : 74 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.1.2012
NeroAPI
16:10:30 #1 Text 0 File DataCompilation.cpp, Line 1322
Multisession status:
====================
Multisession type: start
ISO 9660 file system settings:
==============================
Data mode: Mode 2/XA
File system: ISO 9660 + Joliet
File name length (ISO): Max. of 11 = 8 + 3 chars (Level 1)
Character set (ISO): ISO 9660 (standard ISO CD-ROM)
Add Rock Ridge extensions: no
Allow path depth of more than 8 dirs: no
Allow more than 255 characters in path: no
Do not add the ISO file version extension: no
Allow more than 64 characters for Joliet: no
Volume labels:
==============
ISO volume label: '111'
System identifier: ''
Volume set: ''
Publisher: ''
Data preparer: ''
Application: 'NERO LINUX'
Copyright file: ''
Abstract file: ''
Bibliographic file: ''
Joliet volume label: '111'
System identifier: ''
Volume set: ''
Publisher: ''
Data preparer: ''
Application: 'Nero Linux'
Copyright file: ''
Abstract file: ''
Bibliographic file: ''
Cache status:
=============
Cache files from disk or network: yes
Cache small files: yes
Small files size limit: 65536 bytes
16:10:30 #2 Text 0 File Burncd.cpp, Line 3317
HL-DT-ST DVDRAM GT30N
Buffer underrun protection активирован
16:10:30 #3 ISO9660GEN -11 File Geniso.cpp, Line 3337
First writeable address = 0 (0x00000000)
16:10:30 #4 Text 0 File Burncd.cpp, Line 3647
Turn on Disc-At-Once, using CD-R/RW media
16:10:32 #5 Text 0 File DlgWaitCD.cpp, Line 294
Medium type in the drive: CD-RW High Speed
Lowest/Highest CLV write speed: 4x/10x
Recorder min/max supported write speed: 4x/10x
16:10:32 #6 Text 0 File DlgWaitCD.cpp, Line 313
Last possible write address on media: 359846
Last address to be written: 5289
16:10:32 #7 Text 0 File DlgWaitCD.cpp, Line 325
Write in overburning mode: NO
16:10:32 #8 Text 0 File DlgWaitCD.cpp, Line 2856
Recorder: HL-DT-ST DVDRAM GT30N;
CDRW code: 00 97 26 65; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: B3 00 CE, 2: 61 1A 41 (LI 97:26.65), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 24 1A BC, 2: 26 B2 26, 3: 00 00 00 (invalid)
16:10:32 #9 Text 0 File DlgWaitCD.cpp, Line 500
>>> Protocol of DlgWaitCD activities: <<<
=========================================
16:10:32 #10 Text 0 File ThreadedTransferInterface.cpp, Line 734
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 5290 (5290) = #5290/1:10.40
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 5290 blocks [HL-DT-ST DVDRAM GT30N (H:1 T:0)]
--------------------------------------------------------------
16:10:32 #11 Text 0 File ThreadedTransferInterface.cpp, Line 936
Prepare [HL-DT-ST DVDRAM GT30N (H:1 T:0)] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 11141120, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 5290 | 0 | 0x00
5290 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
16:10:32 #12 Text 0 File Burncd.cpp, Line 4354
Caching options: cache CDRom or Network-No, small files-Yes (<32KB)
16:10:32 #13 Phase 24 File ExtendedProgress.cpp, Line 537
Caching of files started
16:10:32 #14 Text 0 File Burncd.cpp, Line 4476
Cache writing successful.
16:10:32 #15 Phase 25 File ExtendedProgress.cpp, Line 537
Caching of files completed
16:10:32 #16 Phase 36 File ExtendedProgress.cpp, Line 537
Burn process started at 10x (1500 Кб/с)
16:10:32 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2690
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
16:10:32 #18 Text 0 File MMC.cpp, Line 17580
StartDAO : CD-Text - Off
16:10:32 #19 Text 0 File MMC.cpp, Line 21804
Set BUFE: Buffer underrun protection -> ON
16:10:32 #20 Text 0 File MMC.cpp, Line 17808
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 01 0c 28
16:10:32 #21 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800
16:10:37 #22 SCSI -400 File SCSIInterface.cpp, Line 624
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0x9d2361c0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x72 0x0B 0x00 0x00 0x00 0x00 0x00 0x0E
0x09 0x0C 0x00 0x00 0x00 0x03
16:10:37 #23 CDR -400 File Writer.cpp, Line 306
Unspecified target error
HL-DT-ST DVDRAM GT30N (H:1 T:0)
16:10:37 #24 Text 0 File DVDPlusDualLayer.cpp, Line 1455
SetDriveCaps: Set LAST LBA of layer 1 to 0
16:10:37 #25 Phase 38 File ExtendedProgress.cpp, Line 537
Burn process failed at 10x (1500 Кб/с)
Привод прекрасно работает под оффтопиком (10/10 дисков записываются на ура!).
Под Ubuntu не работает вообще. Чтение, кстати, то же иногда подводит, но это не особо важно, так как я редко использую диски, но иногда надо.
Google вменяемого ответа не дал.
Заранее благодарен.