Система Xubuntu 12.04 , на гномовых Ubuntuх проблема сохраняется на всех версиях.
Сидирум Optiarc DVD RW AD-5240S 1.02 SATA, Был подобный но IDE, проблема была такая же.
Суть такая. Только что пытался записать диск в K3b. Диск разогнался, программа нарисовала 50% выполнения и диск перестал вращаться. Сидирум пришел в нерабочее состояние, т.е. не вращается на кнопку открытия не реагирует, диод не светится. Привести в чувство сидирум можно только выдергиванием шлейфа питания из из его тела или полным отключением компьютера от сети. Перезагрузка ни к чему не приводит. Сидюк может отключаться так же сразу после загрузки в него диска. В папках примонтированых устройств сидюк исчезает. Вот собственно и вся проблема. Нашел аналогичную проблему тут
https://forum.ubuntu.ru/index.php?topic=61110.0. Но там решения так и не предложили.
Лог программы K3b:
Devices
-----------------------
Optiarc DVD RW AD-5240S 1.02 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, Последовательный DVD-R, Двухслойный последовательный DVD-R, DVD-R Dual Layer Jump, DVD-RW с ограниченной перезаписью, Последовательный DVD-RW, DVD+RW, DVD+R, Двухслойный DVD+R, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Ограниченная перезапись, Layer Jump] [%7]
K3b::IsoImager
-----------------------
mkisofs print size result: 2668 (5464064 bytes)
System
-----------------------
K3b Version: 2.0.2
KDE Version: 4.8.2 (4.8.2)
QT Version: 4.8.1
Kernel: 3.2.0-23-generic
Used versions
-----------------------
mkisofs: 1.1.11
cdrecord: 1.1.11
cdrecord
-----------------------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 3 = CD-ROM XA mode 2
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'Optiarc '
Identification : 'DVD RW AD-5240S '
Revision : '1.02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM) (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1273856 = 1244 KB
FIFO size : 12582912 = 12288 KB
Speed set to 8467 KB/s
Track 01: data 5 MB
Total size: 5 MB (00:35.60) = 2670 sectors
Lout start: 6 MB (00:37/45) = 2670 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 6
Is not unrestricted
Is not erasable
Disk sub type: Medium Type C, low Beta category (C-) (6)
ATIP start of lead in: -11231 (97:32/19)
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 27
Manufacturer: Prodisc Technology Inc.
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 357176
Starting to write CD/DVD at speed 48.0 in real TAO mode for multi session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01: 0 of 5 MB written.
Track 01: 1 of 5 MB written (fifo 100%) [buf 84%] 273.3x.
Track 01: 2 of 5 MB written (fifo 100%) [buf 100%] 2.0x.
Track 01: 3 of 5 MB written (fifo 100%) [buf 100%] 22.2x.
Track 01: 4 of 5 MB written (fifo 100%) [buf 100%] 21.6x.
Track 01: 5 of 5 MB written (fifo 100%) [buf 100%] 22.3x.
Track 01: Total bytes read/written: 5464064/5464064 (2668 sectors).
Errno: 5 (Input/output error), flush cache scsi sendcmd: no error
CDB: 35 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 02 00 00
Sense Key: 0x0 No Additional Sense, Segment 11
Sense Code: 0x00 Qual 0x02 (end-of-partition/medium detected) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 132.436s timeout 120s
/usr/bin/wodim: Cannot close track.
Trouble flushing the cache
Writing time: 140.933s
Average write speed 0.3x.
Min drive buffer fill was 100%
Fixating...
Errno: 5 (Input/output error), close track/session scsi sendcmd: retryable error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 480s
=== last message repeated 2 times. ===
/usr/bin/wodim: Cannot fixate disk.
Fixating time: 420.033s
Errno: 12 (Cannot allocate memory), prevent/allow medium removal scsi sendcmd: no error
CDB: 1E 00 00 00 00 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 40s
/usr/bin/wodim: fifo had 87 puts and 87 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=48 -tao driveropts=burnfree -multi -xa -tsize=2668s -
mkisofs
-----------------------
2668
I: -input-charset not specified, using utf-8 (detected in locale settings)
Using ________________________000.PDF;1 for /Правила написания записки_3.pdf (Правила написания записки_2.pdf)
Using ________________________001.PDF;1 for /Правила написания записки_2.pdf (Правила написания записки.pdf)
Using _____MODEL000.PDF;1 for cherteji/ТК-MODEL.PDF (КС-MODEL.PDF)
Using _____MODEL001.PDF;1 for cherteji/КС-MODEL.PDF (ГБ-MODEL.PDF)
Using ___________________000.PDF;1 for zapiska/Лит_ратура.pdf (Заключ_ние.pdf)
Using ________________________000.PDF;1 for zapiska/Сборочный стенд.pdf (Вдомость дипломного проекта.pdf)
18.74% done, estimate finish Fri May 4 17:32:31 2012
37.59% done, estimate finish Fri May 4 17:32:31 2012
56.71% done, estimate finish Fri May 4 17:32:31 2012
75.30% done, estimate finish Fri May 4 17:32:31 2012
94.19% done, estimate finish Fri May 4 17:32:31 2012
Total translation table size: 0
Total rockridge attributes bytes: 2889
Total directory bytes: 5150
Path table size(bytes): 42
Max brk space used 0
2668 extents written (5 MB)
mkisofs calculate size command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid Проект данных K3b -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-sergen/k3bzm3721.tmp -rational-rock -hide-list /tmp/kde-sergen/k3bKx3721.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-sergen/k3bNA3721.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/kde-sergen/k3bJE3721.tmp
mkisofs command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -volid Проект данных K3b -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-sergen/k3blH3721.tmp -rational-rock -hide-list /tmp/kde-sergen/k3brw3721.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-sergen/k3bZW3721.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/kde-sergen/k3bDB3721.tmp
команда lspci после отваливания (не знаю нужна или нет):
en@sx:~$ lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA Controller [IDE mode] (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] (rev 02)
01:00.0 VGA compatible controller: NVIDIA Corporation G84 [GeForce 8600 GT] (rev a1)
03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
Попутно вот еще вопрос: какой командой можно заставить систему заново просканировать подключенное оборудование? Я вытащил и втыкнул шлейф питаня (SATA), сидюк заработал, но не определился. Перезагружаться лень каждый раз.
П.С. уже гуглил.
П.С. я не линуксовод, говорите по русски.
Тема: периодически перестает работать сидирум (Прочитано 2155 раз)
