smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is
http://smartmontools.sourceforge.net/=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA MK2552GSX
Serial Number: 689TF8CXS
Firmware Version: LV010A
User Capacity: 250В 059В 350В 016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Jun 26 10:44:06 2012 MSD
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 118) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1628
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 29
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 50
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 053 053 000 Old_age Always - 18918
10 Spin_Retry_Count 0x0033 100 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 29
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 8
193 Load_Cycle_Count 0x0032 067 067 000 Old_age Always - 338807
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 36 (Lifetime Min/Max 20/43)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 50
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 23
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 191
222 Loaded_Hours 0x0032 060 060 000 Old_age Always - 16059
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 333
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 93 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 93 occurred at disk power-on lifetime: 18904 hours (787 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 ef 8c c1 69
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 15 8c c1 40 08 3d+10:29:34.991 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 3d+10:29:34.991 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 3d+10:29:34.990 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 3d+10:29:34.990 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 3d+10:29:34.990 READ NATIVE MAX ADDRESS EXT
Error 92 occurred at disk power-on lifetime: 18904 hours (787 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 ef 8c c1 69
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 15 8c c1 40 08 3d+10:29:30.735 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 3d+10:29:30.735 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 3d+10:29:30.734 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 3d+10:29:30.734 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 3d+10:29:30.734 READ NATIVE MAX ADDRESS EXT
Error 91 occurred at disk power-on lifetime: 18904 hours (787 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 ef 8c c1 69
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 15 8c c1 40 08 3d+10:29:24.913 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 3d+10:29:24.912 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 3d+10:29:24.912 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 3d+10:29:24.912 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 3d+10:29:24.912 READ NATIVE MAX ADDRESS EXT
Error 90 occurred at disk power-on lifetime: 18904 hours (787 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 ef 8c c1 69
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 15 8c c1 40 08 3d+10:29:20.612 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 3d+10:29:20.612 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 3d+10:29:20.611 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 3d+10:29:20.611 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 3d+10:29:20.611 READ NATIVE MAX ADDRESS EXT
Error 89 occurred at disk power-on lifetime: 18904 hours (787 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 0a ef 8c c1 69
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 15 8c c1 40 08 3d+10:29:11.681 READ FPDMA QUEUED
60 00 00 15 8d c1 40 08 3d+10:29:11.681 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 3d+10:29:11.681 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 3d+10:29:11.681 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 3d+10:29:11.680 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Тема: Проблемы с HDD? (Прочитано 1509 раз)
