Установка FreeNX

[ISP]

добрый день, по статье  http://vasilisc.com/terminal_1c_linux
установил freenx сделал все до установки вайна, скачал клиент отсюда

http://www.nomachine.com/download-package.php?Prod_Id=3017

на этом же компьютере что и сервер. пытаюсь с клиента подключится к серверу, указывал как локалхост, так и ип сетевой карты, в результате выдается лишь это

NX> 203 NXSSH running with pid: 20992
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
NX> 285 Setting the preferred NX options
NX> 200 Connected to address: 10.43.179.145 on port: 8888
Connection closed by 10.43.179.145

что не так? в Ubuntu новичек, не судите строго. В заранее благодарен.

еще щас рестартанул сервер и выдал следующее

NX> 203 NXSSH running with pid: 21440
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
NX> 285 Setting the preferred NX options
NX> 200 Connected to address: 10.43.179.145 on port: 8888
Read from socket failed: Connection reset by peer


при установке вместо udo aptitude install freenx  (сругался он на aptitude) использовал apt-get install может быть проблема в этом? если да, то как лучше все это удалить, и снова попробовать?

[ram3z]

Установил по этому мануалу https://help.ubuntu.com/community/FreeNX
В ssh порт 2000, по ssh подключается.
Этой командой sudo dpkg-reconfigure freenx-server я перешел в Create new custom keys там выбрал PASSDB и нажал ок
Потом скопировал через mc ключ на флешку, на клиенте импортировал этот ключ, попытался подключиться выдало вот это.

NX> 203 NXSSH running with pid: 2937
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
NX> 285 Setting the preferred NX options
NX> 200 Connected to address: 192.168.1.150 on port: 2000
NX> 202 Authenticating user: nx
NX> 204 Authentication failed.
Мне кажется, что я что то сделал не так при конфигурации ключей, но не уверен
При этом по SSH могу подключиться
Вот node.conf

(Нажмите, чтобы показать/скрыть)

# node.conf
#
# This file is provided by FreeNX. It should be placed either into
# /etc/nxserver/node.conf (FreeNX style) or /usr/NX/etc/node.conf
# (NoMachine NX style).
#
# It is mostly compatible with NoMachine node.conf. The most important
# difference is that no spaces are allowed when assigning values (eg
# "A=value" is allowed, "A = value" is NOT).
#
# This file is sourced by bash, so you can do some fancy stuff here if you
# want to, but be aware that it is sourced 3 times per connection. If you
# want autostart stuff, set NODE_AUTOSTART instead!
#
#
# You surely are aware that FreeNX is based on the fantastic results that
# the hard work by NoMachine.com has achieved. NoMachine.com released the
# core NX libraries under the GPL. The installation of these libs are the
# precondition for all FreeNX scripts to work. If you are installing this
# software with the help of one of the package management tools of your
# Linux distribution, you can assume that this dependency is taken care of
# by the tool.
#
# You have questions about the inner workings of the NX technology?
#
# Then you are recommended to first check out the rich and very detailed
# NoMachine documentation and their online Knowledge Base at
#
#           http://www.nomachine.com/kb/
#
# Other sources of information are the NoMachine mailing lists
# (nxusers@nomachine.com and nxdevelopers@nomachine.com):
#
#           http://www.nomachine.com/mailinglists.php
#
# The FreeNX (freenx-knx@kde.org) list is here:
#
#           https://mail.kde.org/mailman/listinfo/freenx-knx
#
# SVN: $Id: node.conf.sample 613 2008-09-01 20:42:31Z fabianx $

#########################################################################
# General FreeNX directives
#########################################################################

# The host name which is used by NX server. It's should be used if it's
# different than the default hostname (as returned by `hostname`)
#SERVER_NAME="$(hostname)"

# The node ip which is used by NX Node in unecnrypted session mode.
# Set it if you want to use a specific external ip or the autodetection
# is not working.
#EXTERNAL_PROXY_IP=""

# The port number where local 'sshd' is listening.
SSHD_PORT=2000


#########################################################################
# Authentication / Security directives
#########################################################################

# Authentication directives

# This adds the usermode to the possible authentication methods
# Usermode means that a user can start the nxserver as his shell
# and connect directly to the right server via a custom client.
#ENABLE_USERMODE_AUTHENTICATION="0"

# This adds the passdb to the possible authentication methods
ENABLE_PASSDB_AUTHENTICATION="1"

# This adds SSH to the possible authentication methods. For it to work sshd
# must be set up at localhost accepting password authentication.
# ENABLE_SSH_AUTHENTICATION="1"

# This adds SU to the possible authentication methods. For it to work the
# "nx" user must be in the wheel (RedHat, Fedora) or the users group (SUSE)
# and the user logging in must have a valid shell that accepts the -c
# parameter.
#ENABLE_SU_AUTHENTICATION="0"

# Require all users to be in the passdb, regardless of authentication method
#ENABLE_USER_DB="0"


# If enabled forces the user to use encryption. This will bail out
# if the user does not have encryption enabled.
#ENABLE_FORCE_ENCRYPTION="0"

# Refuse the NX client connection if SSHD does not export the
# SSH_CONNECTION and SSH_CLIENT variables in the environment
# passed to the NX server.
# 1: Will check the remote IP and will not accept the
#    connection if it can't be determined.
# 0: Will accept the connection even if the remote IP
#    is not provided.
#SSHD_CHECK_IP="0"

# If ENABLE_SLAVE_MODE="1" the user will be just logged in _once_ and the
# communication is done via nxnode slave mode.
#
# This is useful for one time passwords or to have less traffic in utmp
# and wtmp.
#
# Also session startup times are much faster in slave mode. This is true especially
# if many printers or shares have to be added.
#
# For this to work the binary nxserver-helper has to be installed in
# PATH_BIN.
#
#ENABLE_SLAVE_MODE="1"

# If ENABLE_LOG_FAILED_LOGINS="1" then failed login attempts are logged to the system
# auth.log.
#
# This is useful in combination with tools like fail2ban.
#
# The default is to log failed login attemps via syslog (3).
#
#ENABLE_LOG_FAILED_LOGINS="1"

#########################################################################
# Restriction directives
#########################################################################

# The base display number from which sessions are started.
#DISPLAY_BASE=1000

# The maximum number of contemporary sessions that can be run on FreeNX
#SESSION_LIMIT=200

# The maximum number of contemporary sessions that a single user can run
# on FreeNX. Defaults to the value of SESSION_LIMIT.
#SESSION_USER_LIMIT=200

# The number of displays reserved for sessions, it has to be greater or equal
# to the maximum number of contemporary sessions that a server can run.
#DISPLAY_LIMIT=200


# User for which sessions should be persistent. Either the keyword "all" or a
# comma-separated list of usernames or groups in the @groupname syntax.
#ENABLE_PERSISTENT_SESSION="all"

# Users and groups for whom persistent sessions should be disabled.
# Especially useful if ENABLE_PERSISTENT_SESSION="all"
#DISABLE_PERSISTENT_SESSION=""

# This enables the mirroring of running sessions via VNC feature.
#
# Session is marked as resumable and type is vnc-mirrored.
#
#ENABLE_MIRROR_VIA_VNC=1

# This enables the sharing of :0 via VNC feature.
#
# Session is marked as resumable and type is vnc-local.
#
# Note: You need to have the rights to access the display
#       else it does not work.
#
#ENABLE_DESKTOP_SHARING=1

#
# General shadowing / mirroring notes:
#
# By default shadowing is only allowed for the same user.
#
# If nxserver finds nxshadowacl binary, it asks it, for which users
# the permission is granted.
#
# nxshadowacl <user>
#
# Exit code:
#
# 0 -> Save cookie in session file for other users
# 1 -> Do not save cookie
#
# Check if user is allowed to be shadowed by admin user.
#
# nxshadowacl <user> <admin>
#
# Exit code:
#
# 0 -> Yes, allow shadowing and add to list
# 1 -> No, don't allow shadowing
#

#
# When using NX 3.0 shadowing, this enables asking the user whether
# he authorizes another user to shadow his session
#
# 0: No authorization request will be presented,
#    and the session will be shadowed as if the user had approved.
# 1: (default) Ask for authorization
#
#ENABLE_SESSION_SHADOWING_AUTHORIZATION=1

# Allow session shadowing in interactive mode:
#
# 1: The shadowing user can interact with the shadowed session.
#
# 0: The shadowed session is view-only. No interaction with the
#    shadowed session is possible.
#
#ENABLE_INTERACTIVE_SESSION_SHADOWING=1

#
# Enable or disable clipboard:
#
# client:  The content copied on the client can be pasted inside the
#            NX session.
#
# server: The content copied inside the NX session can be pasted
#             on the client.
#
# both:    The copy&paste operations are allowed both between the
#             client and the NX session and vice-versa.
#
# none:   The copy&paste operations between the client and the NX
#            session are never allowed.
#
#ENABLE_CLIPBOARD="both"


#
# Enable or disable the pulldown dialog, which provides a graphical
# way to suspend or terminate the rootless session:
#
# 1: Enabled. The pulldown menu is shown when the mouse pointer
#     moves near the middle of the top boundary of a window and
#     allows the user to suspend or terminate the session by means
#     of an icon-click.
#
# 0: Disabled. The ctrl+alt+T key combination has to be issued
#     to get the dialog for suspending or terminating the session.
#
#ENABLE_PULLDOWN_MENU="1"


# The option USE_PROCESSOR_TASKSET is for setting the CPU affinity of all
# nx related processes.
#
# Note: To have for example startkde run on even another core, just specify:
#
# COMMAND_STARTKDE="taskset -c 2 -- startkde"
#
# FreeNX runs this option like: $COMMAND_TASKSET -cp "$USE_PROCESSOR_TASKSET" $$
#
# So with $USE_PROCESSOR_TASKSET set to 3,4 it would balance the tasks to cores
# 3 and 4.
#
# If this option is empty, no balance to cores is done.
#
#USE_PROCESSOR_TASKSET=""

# If you set ENABLE_ADVANCED_SESSION_CONTROL="1" you can start a new application in an already
# running rootless session by using "add <rest of name>" as session name.
#
# Note: The client will return a message on that.
#
# ENABLE_ADVANCED_SESSION_CONTROL="0"

# If you set ENABLE_SHOW_RUNNING_SESSIONS="0" then nxserver will only show
# suspended sessions and you will not be able to resume or terminate a running
# session.
#
ENABLE_SHOW_RUNNING_SESSIONS="0"

#########################################################################
# Logging directives
#########################################################################

# This directives controls the verbosity of the server-wide log.
# 0: No Logging
# 1: Errors
# 2: Warnings
# 3: Important information
# 4: Server - Client communication
# 5: Information
# 6: Debugging information
# 7: stderror of some applications
#NX_LOG_LEVEL=0

# By setting this to 0 the nxserver might be a bit faster, but passwords can be found in the log files.
#NX_LOG_SECURE=1

# Before turning logging on, please make sure that NX_LOGFILE is
# writeable for the "nx" user
#NX_LOGFILE=/var/log/nxserver.log

# This directive controls if the temporary session directory
# ($HOME/.nx/C-<hostname>-<display>-<session_id>) should be kept after a
# session has ended. A successfully terminated session will be saved as
# T-C-<hostname>-<display>-<session_id> while a failed session will be saved
# as F-C-<hostname>-<display>-<session_id>.
# The default is to cleanup the directories.
#SESSION_LOG_CLEAN=1

# Amount of seconds nxserver is to keep session history. The default of 2592000
# is equivalent to 30 days. If this is 0 no session history will be kept
# and a negative value denotes infinity.
#SESSION_HISTORY=2592000


#########################################################################
# Forwarding directives
#########################################################################

# FreeNX with ENABLE_SERVER_FORWARD="1" will automatically forward all
# connections to the host specified in SERVER_FORWARD_HOST with the
# secret key SERVER_FORWARD_KEY.
#
# This allows to have a "chain" of NX Servers. Note that you will need to
# use "SSL encryption" for all connections.

#ENABLE_SERVER_FORWARD="0"
#SERVER_FORWARD_HOST=""
#SERVER_FORWARD_PORT=22
#SERVER_FORWARD_KEY="/usr/NX/share/client.id_dsa.key"


# FreeNX with ENABLE_NOMACHINE_FORWARD_PORT="1" will automatically forward all
# connections to the commercial NoMachine nxserver installed on the same
# machine, which go in by port NOMACHINE_FORWARD_PORT. This feature is introduced
# to enable the usage of FreeNX and NoMachine NX side by side on the same machine
# without conflicts.
#
# Note: You need to let SSHD listen to several ports to make use of this
#       directive.

#ENABLE_NOMACHINE_FORWARD_PORT="0"
#NOMACHINE_FORWARD_PORT="22"

#NOMACHINE_SERVER="/usr/NX/bin/nxserver"
#NOMACHINE_NX_HOME_DIR="/usr/NX/home/nx"


# LOAD BALANCING
# ==============
#
# To do load balancing setup some hosts in LOAD_BALANCE_SERVERS and
# make:
#
#   - either sure that all incoming connections are sent to the master
#     server by using forwarding directives on the "slave" servers.
#
#   - or share the session database space via NFS between the servers.
#     (not recommended at the moment as race conditions for DISPLAYs can
#      occur)
#

#LOAD_BALANCE_SERVERS=""

# The following load_balance_algorithms are available at the moment:
#
# "load", "round-robin", "random"
#
# For "load" you need a script called nxcheckload in PATH_BIN.
#
# A sample script, which you can change to your needs it shipped with
# FreeNX under the name nxcheckload.sample.

#LOAD_BALANCE_ALGORITHM="random"

# By setting ENABLE_LOADBALANCE="1" you can let users choose their
# preferred host, while being forwarded to another server. Of course
# this is just a preference. The loadbalancing algorithm can completely
# choose to ignore the users choice.

#ENABLE_LOAD_BALANCE_PREFERENCE="0"

#########################################################################
# Services directives
#########################################################################

# FreeNX with ENABLE_ESD_PRELOAD="1" will automatically try to setup
# the sound with the help of the esd media helper.
#
# Currently ESD will be used just by the Windows NX Client.
#
# Be sure that $ESD_BIN_PRELOAD is in your path, does exist and work
# before enabling this directive.

#ENABLE_ESD_PRELOAD="0"
#ESD_BIN_PRELOAD="esddsp"

# FreeNX with ENABLE_ARTSD_PRELOAD="1" will automatically try to setup
# the sound with the help of the artsd media helper.
#
# Currently ARTSD will be used just by the Linux NX Client.
#
# Be sure that $ARTSD_BIN_PRELOAD is in your path, does exist and work
# before enabling this directive.

#ENABLE_ARTSD_PRELOAD="0"
#ARTSD_BIN_PRELOAD="artsdsp"

# FreeNX with ENABLE_KDE_CUPS="1" will automatically write
# $KDE_PRINTRC and put the current used socket into it.
#
# If you additionally enable ENABLE_KDE_CUPS_DYNAMIC it will set the
# Host entry to the script nxcups-gethost, which dynamically tries all
# possible entries to find the current printing host.
#
# The order is: CUPS_SERVER (env var), ~/.cups/client.conf, $KDE_PRINTRC,
#               $CUPS_DEFAULT_SOCK, localhost
#
# So this option is most useful with ENABLE_CUPS_SERVER_EXPORT="1".
#
# $KDE_PRINTRC is automatically calculated if its not set.

#ENABLE_KDE_CUPS="1"
#ENABLE_KDE_CUPS_DYNAMIC="0"
#KDE_PRINTRC="$KDEHOME/share/config/kdeprintrc"

# FreeNX with ENABLE_CUPS_SERVER_EXPORT="1" will automatically
# export the environment variable CUPS_SERVER.

#ENABLE_CUPS_SERVER_EXPORT="1"

# FreeNX with ENABLE_CUPS_SEAMLESS will automatically try to download the
# necessary ppds from the client.
#
# As the forwarding is just active as soon as nxagent is started,
# we need a small delay of $CUPS_SEAMLESS_DELAY.
#
# Note: You need to use a patched cupsd on client side.

#ENABLE_CUPS_SEAMLESS="0"
#CUPS_SEAMLESS_DELAY="10"

# FreeNX with ENABLE_FOOMATIC will integrate the foomatic db to the list
# of available ppd drivers via the $COMMAND_FOOMATIC command.

#ENABLE_FOOMATIC="1"
#COMMAND_FOOMATIC="/usr/bin/foomatic-ppdfile"

# CUPS_BACKEND and CUPS_ETC are the corresponding paths of your CUPS
# installation.

#CUPS_BACKEND="/usr/lib/cups/backend"
#CUPS_IPP_BACKEND="$CUPS_BACKEND/ipp"
#CUPS_DEFAULT_SOCK="/var/run/cups/cups.sock"
#CUPS_ETC="/etc/cups"

# SAMBA_MOUNT_SHARE_PROTOCOL is a key to configure the supported
# protocols for mounting shares.
#
# This key can be set to the following values:
#
# both, either SMB and CIFS protocol are supported, this is the default value.
# smbfs, only SMB protocol is supported.
# cifs, only CIFS protocol is supported.
# none, no network file-sharing protocol is supported.

#SAMBA_MOUNT_SHARE_PROTOCOL="both"

# FreeNX with ENABLE_SAMBA_PRELOAD="1" will automatically setup
# port 445 and 139 and forward them to the used samba port.
#
# This enables samba browsing to the local subnet in for example
# konqueror.
#
#ENABLE_SAMBA_PRELOAD="0"

# FreeNX with ENABLE_SOURCE_BASH_PROFILE="1" will source the users ~/.bash_profile
# before application startup as we are kind of a login shell.
#
# With this key this behaviour can be enabled (default) or disabled.
#
#ENABLE_SOURCE_BASH_PROFILE="1"

#########################################################################
# Path directives
#########################################################################

# USER_FAKE_HOME is the base directory for the .nx directory. Use this
# parameter instead of the users home directory if $HOME is on a NFS share.
# Note that this directory must be unique for every user! To accomplish this
# it is recommended to include $USER in the path.
#USER_FAKE_HOME=$HOME

# Add the nx libraries to LD_LIBRARY_PATH before starting nx agents.
# WARNING: This will NOT (and should not) affect applications. ONLY Disable
# this if the nx libraries are in a standard system path (such as /usr/lib)!
#SET_LD_LIBRARY_PATH="0"


# The command binary for the default window manager. If set it is run when a
# 'unix-custom' session is requested by the NX Client and an application
# to run is specified. It defaults to empty (ie no WM is run).
# If KILL_DEFAULT_X_WM is set the WM is terminated after the started
# application finishes. Else FreeNX will wait for the WM to complete.
#DEFAULT_X_WM=""
#KILL_DEFAULT_X_WM="1"

# When a 'unix-default' session is requested by the client the user's X startup
# script will be run if pressent and executable, otherwise the default X
# session will be run.
# Depending on distribution USER_X_STARTUP_SCRIPT might be .Xclients, .xinitrc
# and .Xsession
# Depending on distribution DEFAULT_X_SESSION might be /etc/X11/xdm/Xsession,
# /etc/X11/Sessions/Xsession or /etc/X11/xinit/xinitrc
#USER_X_STARTUP_SCRIPT=.Xclients
#DEFAULT_X_SESSION=/etc/X11/Xsession

# When the session is started some distros execute some scripts to get the
# environment ready. Set 1 if you want DEFAULT_X_SESSION to be called before
# executing the session.
#BOOTSTRAP_X_SESSION="0"

# The key that contains the name of the script that starts a KDE session.
# It's run when a 'unix-kde' session is requested by the client.
#COMMAND_START_KDE='/usr/bin/nx-session-launcher-suid startkde'

# The key that contains the name of the script that starts a gnome session.
# It's run when a 'unix-gnome' session is requested by the client.
#COMMAND_START_GNOME='/usr/bin/nx-session-launcher-suid gnome-session'

# The key that contains the name of the script that starts a CDE session.
# It's run when a 'unix-cde' session is requested by the client.
#COMMAND_START_CDE='/usr/bin/nx-session-launcher-suid xfce4-session'

# The key that contains the name of the complete path of command name
# 'xterm'. It is run when a unix "xterm" session is requested by the
# client.
#COMMAND_XTERM=xterm

# The key that contains the name of the complete path of command name
# 'xauth'.
#COMMAND_XAUTH=/usr/bin/xauth

# The key that contains the name of the complete path of command name
# 'smbmount'.
#COMMAND_SMBMOUNT=smbmount

# The key that contains the name of the complete path of command name
# 'smbumount'.
#COMMAND_SMBUMOUNT=smbumount

# The key that contains the name of the complete path of command name
# 'mount.cifs'.
#COMMAND_SMBMOUNT_CIFS=/sbin/mount.cifs

# The key that contains the name of the complete path of command name
# 'umount.cifs'.
#COMMAND_SMBUMOUNT_CIFS=/sbin/umount.cifs

# The key that contains the name of the complete path of the 'netcat' command.
#COMMAND_NETCAT=netcat

# The key that contains the name of the complete path of the 'ssh' and
# 'ssh-keygen' command.
#COMMAND_SSH=ssh
#COMMAND_SSH_KEYGEN=ssh-keygen

# The key that contains the name of the complete path of the 'cupsd' command.
#COMMAND_CUPSD=/usr/sbin/cupsd

# The tool to generate md5sums with
#COMMAND_MD5SUM="openssl md5"

# The key that contains the name of the complete path of the 'rdesktop' command.
#COMMAND_RDESKTOP=rdesktop

# The key that contains the name of the complete path of the 'vncviewer' command.
#COMMAND_VNCVIEWER=vncviewer

# The key that contains the name of the complete path of the 'vncpasswd' command.
# By default the builtin nxpasswd is used.
#COMMAND_VNCPASSWD="$PATH_BIN/nxpasswd"

# The key that contains the name of the complete path of the 'x11vnc' command.
#COMMAND_X11VNC=x11vnc

# The key that contains the name of the complete path of the 'taskset' command.
#COMMAND_TASKSET=taskset

#########################################################################
# Misc directives
#########################################################################

# When you installed an old 1.5.0 NX Backend, set this to 1.
#ENABLE_1_5_0_BACKEND="0"

# When set to 1 this will automatically resume started sessions
#ENABLE_AUTORECONNECT="0"

# When set to 1 this will automatically resume started sessions
# but only if an older client version is used
#ENABLE_AUTORECONNECT_BEFORE_140="1"

# When set to 1 exports NXUSERIP / NXSESSIONID in nxnode
#EXPORT_USERIP="0"
#EXPORT_SESSIONID="1"

# This can be set to any executable, which is started after session startup
# like: $NODE_AUTOSTART {start|restore}
#NODE_AUTOSTART=""

# When set to 1 will start nxagent in rootless mode.
#ENABLE_ROOTLESS_MODE="1"

# If enabled writes entries via the COMMAND_SESSREG program
# into utmp/wtmp/lastlog database.
# Note: You have to make sure that you add the nx user to the
#       utmp or tty group or how its called on your system
#       before this directive works.
#ENABLE_USESSION="1"
#COMMAND_SESSREG="sessreg"

# Extra options sent to the different nx agents. See !M documentation
# for examples of useful parameters.
#AGENT_EXTRA_OPTIONS_RFB=""
#AGENT_EXTRA_OPTIONS_RDP=""
#AGENT_EXTRA_OPTIONS_X="-nolisten tcp"

# The number of seconds we wait for the nxagent to start before
# deciding startup has failed
#AGENT_STARTUP_TIMEOUT="60"

# The font server the agent will use. If set to "" no font server is used.
# For this to do any good, the client has to have the same font server set
# in /etc/X11/XF86Config
#AGENT_FONT_SERVER=""

# Disable or enable use of 'tcp nodelay' on proxy. Old versions of Linux
# kernels have problems using this option on sockets that will cause a loss
# of TCP connections. This option is not set by default to allow clients to
# specify whether to enable or disable TCP nodelay. Setting this option to
# the value of "0" NX proxy avoids using 'tcp nodelay' but it will cause a
# loss of interaction in sessions.
#PROXY_TCP_NODELAY=""

# Extra options to nxproxy. See !M documentation for useful parameters.
#PROXY_EXTRA_OPTIONS=""

# In case you want to use an external 'rdesktop' command
# set this to "1".
#
# If nxdesktop cannot be found this is set automatically to "1".
#ENABLE_EXTERNAL_NXDESKTOP="1"

# This configuration variable determines if 'rdesktop' command should be run with -k keyboard option
# or if the keyboard should be autodetected.
#
#ENABLE_EXTERNAL_NXDESKTOP_KEYBOARD="1"

# In case you want to use an external 'nxviewer' command
# set this to "1".
#
# If nxviewer cannot be found this is set automatically to "1".
#ENABLE_EXTERNAL_NXVIEWER="1"

[oermolaev]

на пользователя NX ругается.
пароль ему задавали?
и вот это:
#ENABLE_SU_AUTHENTICATION="0"
по-моему, должно быть включено

[ram3z]

Пароль задавал. Но я его знаю, он совпадает с паролем локального юзера, естественно вводил. #ENABLE_SU_AUTHENTICATION="0" щас попробую отпишусь
Пользователь решил продолжить мысль 08 Сентября 2011, 12:23:12:не получается. тоже самое. вообще я документацию читал, там было написано, что способ аутентификации только один должен быть.
Я думаю, может там как то ключи неправильно копируются через флешку. такое может быть?
Я копирую ключ в домашнюю директорию из терминала под рутом, а потом тоже под рутом на флешку и с флешки на удаленный комп.
Вообще можно копировать через scp или через shell соединение в mc или еще там в mc если нажать - меню можно копировать файл на удаленный компьютер, но во всех этих вариантах по умолчанию соединение идет по 22 порту. я не знаю как назначить свой порт -3000 для соединения с удаленным хостом. может подскажете. желательно через mc

[oermolaev]

Вот это "Using custom SSH keys" из той инструкции - я не делал, не смотря на предупреждения о риске для безопасности
Да и 22 порт можно было бы пока не менять, раз не знаете как использовать. Вообще, порт при подключении через ssh задается ключом -p
А здесь включите нужный уровень логирования:
#NX_LOG_LEVEL=0
#NX_LOGFILE=/var/log/nxserver.log
и смотрите..

[ram3z]

Попробовал все переустановить без Using custom SSH key
Сэтим #NX_LOG_LEVEL=0
#NX_LOGFILE=/var/log/nxserver.log
 может не совсем разобрался. Я убрал комметнарии пробовал менять 0 на 1 и 4. Не помогло. Гуглением нашел такое решение
The solution was that the /home/NX/.ssh/authorized_keys file was owned by root, not by the user nx.  To fix, do a chown nx:nx authorized_keys.
Я не очень разбираюсь в командах консоли, но мне кажется, что в команде chown nx:nx authorized_keys где то нужно вставить имя юзера nx. Подскажите.
Вообще, когда я впервые устанавливал freenx у меня все завелось как то очень легко. Я ниче не делал, кроме ENABLE_PASSDB_AUTHENTICATION="1" и ENABLE_SHOW_RUNNING_SESSIONS="0" Потом как то перестало работать. Непонятно как.

[oermolaev]

Сегодня установил freenx на новый комп с Ububntu 11.04 по первым семи пунктам указанной инструкции специально используя только copy-paste - всё завелось без дополнительных телодвижений.

[ram3z]

Пытаюсь все вычистить и установить заново aptitude purge freenx не удаляет конф. файлы. Подскажите где лежат юзеры freenx?

[ram3z]

Проблему NX> 204 Authentication failed. Решил так:
gedit /etc/ssh/sshd_config

RSAAuthentication yes
PubkeyAuthentication yes
#AuthorizedKeysFile        %h/.ssh/authorized_keys2
Было
RSAAuthentication yes
PubkeyAuthentication no
#AuthorizedKeysFile        %h/.ssh/authorized_keys2
Появилась новая проблема

(Нажмите, чтобы показать/скрыть)

NX> 203 NXSSH running with pid: 2132
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
NX> 285 Setting the preferred NX options
NX> 200 Connected to address: 192.168.1.101 on port: 22
NX> 202 Authenticating user: nx
NX> 208 Using auth method: publickey
HELLO NXSERVER - Version 3.2.0-74-SVN OS (GPL, using backend: 3.5.0)
NX> 105 hello NXCLIENT - Version 3.2.0
NX> 134 Accepted protocol: 3.2.0
NX> 105 SET SHELL_MODE SHELL
NX> 105 SET AUTH_MODE PASSWORD
NX> 105 login
NX> 101 User: nat
NX> 102 Password:
NX> 103 Welcome to: nat-laptop user: nat
NX> 105 listsession --user="nat" --status="suspended,running" --geometry="1024x600x24+render" --type="unix-gnome"
NX> 127 Sessions list of user 'nat' for reconnect:

Display Type             Session ID                       Options  Depth Screen         Status      Session Name
------- ---------------- -------------------------------- -------- ----- -------------- ----------- ------------------------------


NX> 148 Server capacity: not reached for user: nat
NX> 105 startsession  --link="lan" --backingstore="1" --encryption="1" --cache="16M" --images="64M" --shmem="1" --shpix="1" --strict="0" --composite="1" --media="0" --session="local" --type="unix-gnome" --geometry="974x576" --client="linux" --keyboard="pc105/us" --screeninfo="974x576x24+render"

Warning: Identity file /etc/nxserver/users.id_dsa not accessible: No such file or directory.
Permission denied (publickey,password).
NX> 280 Exiting on signal: 15

На файл /etc/nxserver/users.id_dsa поменял права, ввел в группу nx и позволил чтение запись
Кто нить может подсказать че нить?

[oermolaev]

не понимаю где вы себе нажили проблему.. только что установил на виртуальной машине по первым семи пунктам инструкции, ни шага влево-вправо.. всё работает сразу от имени текущего пользователя с клиента NOMACHINE

[ram3z]

В общем проблема нажилась из за генерирования ключей, включения в ssh параметра
PasswordAuthentication yes
И отключением
PubkeyAuthentication no
Если их не трогать то все работает с пол пинка.
Чтобы полностью удалить freenx - sudo aptitude purge freenx
gksudo nautilus
Файловая система поиск freenx + поиск nxserver
Все, что находите, удаляйте.
Потом sudo apt-get update и устанавливайте заново по инструкции, только без ключей и т.п.
Всем, кто помогал - спасибо.
Остались правда недочеты: не монтируются на сервер флешки с клиента и нет печати с принтера клиента тут http://openfacts2.berlios.de/wikien/index.php/BerliosProject:FreeNX_-_Printing
мануал на английском по поводу принтера. В общем, как я понял печать у клиента пока что с полпинка должна работь в KDE, а для остальных нужно что то патчить. Если кто разберется просьба отписаться.

[oermolaev]

по поводу патчей смотрите здесь: Терминальные решения

[ram3z]

Спасибо. Хороший форум.
А еще один вопрос. Если в настройках клиента (nomachine) поставить fullsreen, то потом на свой рабочий стол как переключиться? из Ubuntu. В винде  можно по альт+шифт, а в Ubuntu че то прямо никак. Сверху, как в РДП или ВНЦ ниче такого не вылезает, чтобы окно свернуть или отключиться.

[oermolaev]

в RDP, кстати, тоже ничего "не вылезает" если из tsclient или rdesktop
я обхожусь завершением сеанса.. возможно есть варианты?

[ram3z]

Ну это дополнительное неудобство при переходе компаний на линух. Кроме того там буфер обмена общий-очень удобно, но воспользоваться нельзя, если нет варианта переключиться.