Форум русскоязычного сообщества Ubuntu


За новостями русскоязычного сообщества и Ubuntu в целом можно следить на нашей страничке в Google+

Автор Тема: нет данных от lm sensors по lm93  (Прочитано 585 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Оффлайн globalhook

  • Автор темы
  • Новичок
  • *
  • Сообщений: 1
    • Просмотр профиля
нет данных от lm sensors по lm93
« : 17 Июнь 2017, 20:16:42 »
Господа форумчане, прошу не закидывать помидорами и тухлыми яйцами. Недавно начал знакомство с ubuntu. Установил Ubuntu Server на старенькое железо от intel sr1400 с материнской SE7520JR2 (SE7520JR23D). Пока вроде все получается, но не могу получить от lm_sensors данные о температуре процессоров и напряжениях БП, ну и соотвественно кулерами не могу управлять. По мануалу этими делами заведует микросхема LM93. Но как я не запускаю sensors-detect, эту микросхема не обнаруживается. Ткните носом, расскажите куда капать.
root@ubuntu:/home/globalhook# sensors-detect
# sensors-detect revision 6284 (2015-05-31 14:00:33 +0200)
# Board: Intel SE7520JR23D
# Kernel: 4.10.0-22-generic x86_64
# Processor: Intel(R) Xeon(TM) CPU 3.00GHz (15/4/3)

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no):
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD Family 10h thermal sensors...                           No
AMD Family 11h thermal sensors...                           No
AMD Family 12h and 14h thermal sensors...                   No
AMD Family 15h thermal sensors...                           No
AMD Family 16h thermal sensors...                           No
AMD Family 15h power sensors...                             No
AMD Family 16h power sensors...                             No
Intel digital thermal sensor...                             No
Intel AMB FB-DIMM thermal sensor...                         No
Intel 5500/5520/X58 thermal sensor...                       No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'...               Yes
Found `Nat. Semi. PC87427 Super IO Fan Sensors'             Success!
    (address 0x700, driver `pc87427')
Found `Nat. Semi. PC87427 Super IO Health Sensors'          Success!
    (address 0x720, driver `to-be-written')
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No

Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no):
Found `IPMI BMC SSIF'...                                    Success!
    (confidence 8, driver `to-be-written')

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): y
Probing for `National Semiconductor LM78' at 0x290...       No
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no):
Using driver `i2c-i801' for device 0000:00:1f.3: Intel 82801EB ICH5

Next adapter: SMBus I801 adapter at 0540 (i2c-0)
Do you want to scan it? (yes/NO/selectively): y
Client found at address 0x48
Handled by driver `lm75' (already loaded), chip type `lm75'
Client found at address 0x52
Handled by driver `eeprom' (already loaded), chip type `eeprom'
    (note: this is probably NOT a sensor chip!)


Now follows a summary of the probes I have just done.
Just press ENTER to continue:

Driver `to-be-written':
  * ISA bus, address 0x720
    Chip `Nat. Semi. PC87427 Super IO Health Sensors' (confidence: 9)
  * ISA bus
    Chip `IPMI BMC SSIF' (confidence: 8)

Driver `pc87427':
  * ISA bus, address 0x700
    Chip `Nat. Semi. PC87427 Super IO Fan Sensors' (confidence: 9)

Driver `lm75':
  * Bus `SMBus I801 adapter at 0540'
    Busdriver `i2c_i801', I2C address 0x48
    Chip `lm75' (confidence: 6)

Note: there is no driver for Nat. Semi. PC87427 Super IO Health Sensors yet.
Check http://www.lm-sensors.org/wiki/Devices for updates.

To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
lm75
pc87427
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!

Do you want to add these lines automatically to /etc/modules? (yes/NO)y
Successful!

# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.


# Generated by sensors-detect on Fri May 26 09:53:22 2017
# Chip drivers
i2c-i801
eeprom
lm75
pc87427
root@ubuntu:/home/globalhook# sensors
pc87427-isa-0700
Adapter: ISA adapter
fan1:           FAULT  (min =    0 RPM)
fan3:           FAULT  (min =    0 RPM)
fan4:           FAULT  (min =    0 RPM)
fan5:           FAULT  (min =    0 RPM)
fan6:           FAULT  (min =    0 RPM)
fan7:           FAULT  (min =    0 RPM)
fan8:           FAULT  (min =    0 RPM)
temp1:        +25.5°C  (low  = -127.0°C, high = +127.0°C)
                       (crit = +100.0°C)  sensor = thermal diode

lm75-i2c-0-48
Adapter: SMBus I801 adapter at 0540
temp1:        +32.5°C  (high = +80.0°C, hyst = +75.0°C)
На ошибку по кулерам не обращайте внимания-они действительно отключены и охлаждаются турбиной от соньки

Оффлайн smart

  • Новичок
  • *
  • Сообщений: 48
    • Просмотр профиля
Re: нет данных от lm sensors по lm93
« Ответ #1 : 31 Август 2017, 21:08:16 »
LM93 - довольно большая SMD микросхема - есть ли он на материнке то ? 56 ножек.
Плюс BIOS сбросить на дефолтные настройки, там будет закладка (наверно) с
показаниями температур и скоростей, если там всё по нулям - сами решайте дальше...

 

Страница сгенерирована за 0.123 секунд. Запросов: 23.