последний gmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Dec 18 08:02:57 UTC 2007 (Ubuntu 2.6.22-14.47-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7c0000 (usable)
[ 0.000000] BIOS-e820: 000000003f7c0000 - 000000003f7ce000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f7ce000 - 000000003f800000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 119MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 260032) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 260032
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 260032
[ 0.000000] On node 0 totalpages: 260032
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 239 pages used for memmap
[ 0.000000] HighMem zone: 30417 pages, LIFO batch:7
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F90F0 checksum 0
[ 0.000000] ACPI: RSDP 000F90F0, 0014 (r0 MSI )
[ 0.000000] ACPI: RSDT 3F7C0000, 003C (r1 MSI_NB MEGABOOK 5102007 MSFT 97)
[ 0.000000] ACPI: FACP 3F7C0200, 0084 (r2 MSI 1057 5102007 MSFT 97)
[ 0.000000] ACPI: DSDT 3F7C05B0, 41EE (r1 MSI 1057 5102007 INTL 20051117)
[ 0.000000] ACPI: FACS 3F7CE000, 0040
[ 0.000000] ACPI: APIC 3F7C0390, 005C (r1 MSI OEMAPIC 5102007 MSFT 97)
[ 0.000000] ACPI: MCFG 3F7C03F0, 003C (r1 MSI OEMMCFG 5102007 MSFT 97)
[ 0.000000] ACPI: SLIC 3F7C0430, 0176 (r1 MSI_NB MEGABOOK 5102007 MSFT 97)
[ 0.000000] ACPI: OEMB 3F7CE040, 007E (r1 MSI AMI_OEM 5102007 MSFT 97)
[ 0.000000] ACPI: HPET 3F7C47A0, 0038 (r1 MSI OEMHPET 5102007 MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3f800000:bf600000)
[ 0.000000] Built 1 zonelists. Total pages: 258001
[ 0.000000] Kernel command line: root=UUID=ba203715-be65-4740-8a8e-85766a438977 ro quiet splash locale=ru_RU
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2000.310 MHz processor.
[ 12.341601] Console: colour VGA+ 80x25
[ 12.341871] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 12.342141] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 12.365123] Memory: 1019508k/1040128k available (2015k kernel code, 19892k reserved, 916k data, 364k init, 122624k highmem)
[ 12.365131] virtual kernel memory layout:
[ 12.365132] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 12.365133] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 12.365134] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 12.365135] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 12.365136] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 12.365137] .data : 0xc02f7de6 - 0xc03dce84 ( 916 kB)
[ 12.365138] .text : 0xc0100000 - 0xc02f7de6 (2015 kB)
[ 12.365140] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 12.365169] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 12.365291] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 12.365296] hpet0: 3 64-bit timers, 14318180 Hz
[ 12.446160] Calibrating delay using timer specific routine.. 4003.96 BogoMIPS (lpj=8007938)
[ 12.446177] Security Framework v1.0.0 initialized
[ 12.446183] SELinux: Disabled at boot.
[ 12.446193] Mount-cache hash table entries: 512
[ 12.446290] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 12.446297] monitor/mwait feature present.
[ 12.446298] using mwait in idle threads.
[ 12.446302] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 12.446304] CPU: L2 cache: 4096K
[ 12.446306] CPU: Physical Processor ID: 0
[ 12.446307] CPU: Processor Core ID: 0
[ 12.446309] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 12.446316] Compat vDSO mapped to ffffe000.
[ 12.446326] Checking 'hlt' instruction... OK.
[ 12.462215] SMP alternatives: switching to UP code
[ 12.462565] Early unpacking initramfs... done
[ 12.737275] ACPI: Core revision 20070126
[ 12.737312] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 12.739351] CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
[ 12.739366] SMP alternatives: switching to SMP code
[ 12.739438] Booting processor 1/1 eip 3000
[ 12.749819] Initializing CPU#1
[ 12.829430] Calibrating delay using timer specific routine.. 4000.30 BogoMIPS (lpj=8000611)
[ 12.829435] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 12.829440] monitor/mwait feature present.
[ 12.829442] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 12.829444] CPU: L2 cache: 4096K
[ 12.829445] CPU: Physical Processor ID: 0
[ 12.829447] CPU: Processor Core ID: 1
[ 12.829448] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 12.830201] CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
[ 12.830222] Total of 2 processors activated (8004.27 BogoMIPS).
[ 12.830391] ENABLING IO-APIC IRQs
[ 12.830580] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 12.977233] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 12.997212] Brought up 2 CPUs
[ 13.259363] migration_cost=69
[ 13.259487] Booting paravirtualized kernel on bare hardware
[ 13.259563] Time: 16:11:23 Date: 00/29/108
[ 13.259581] NET: Registered protocol family 16
[ 13.259658] EISA bus registered
[ 13.259662] ACPI: bus type pci registered
[ 13.259827] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 13.259829] PCI: Using configuration type 1
[ 13.259830] Setting up standard PCI resources
[ 13.270332] ACPI: EC: Look up EC in DSDT
[ 13.270895] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[ 13.272793] ACPI: Interpreter enabled
[ 13.272795] ACPI: (supports S0 S1 S3 S4 S5)
[ 13.272811] ACPI: Using IOAPIC for interrupt routing
[ 13.279308] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[ 13.279401] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 13.279418] PCI: Probing PCI hardware (bus 00)
[ 13.280082] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 13.280086] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 13.280818] PCI: Transparent bridge - 0000:00:1e.0
[ 13.280882] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 13.281012] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 13.281069] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 13.281133] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 13.281198] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 13.288525] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 13.288624] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 13.288718] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 13.288810] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 13.288905] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 13.288998] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 13.289091] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 13.289184] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 13.289276] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 13.289287] pnp: PnP ACPI init
[ 13.289294] ACPI: bus type pnp registered
[ 13.290745] pnp: PnP ACPI: found 13 devices
[ 13.290747] ACPI: ACPI bus type pnp unregistered
[ 13.290751] PnPBIOS: Disabled by ACPI PNP
[ 13.290786] PCI: Using ACPI for IRQ routing
[ 13.290788] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 13.303960] NET: Registered protocol family 8
[ 13.303962] NET: Registered protocol family 20
[ 13.304005] pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 13.304012] pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 13.304015] pnp: 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 13.304018] pnp: 00:08: iomem range 0xfff80000-0xffffffff could not be reserved
[ 13.304022] pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
[ 13.304025] pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 13.304029] pnp: 00:0b: iomem range 0xe0000000-0xe3ffffff has been reserved
[ 13.304033] pnp: 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 13.304036] pnp: 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 13.304038] pnp: 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 13.304041] pnp: 00:0c: iomem range 0x100000-0x3f7fffff could not be reserved
[ 13.304526] Time: tsc clocksource has been installed.
[ 13.304537] Switched to high resolution mode on CPU 0
[ 13.304616] Switched to high resolution mode on CPU 1
[ 13.334239] PCI: Bridge: 0000:00:1c.0
[ 13.334242] IO window: d000-dfff
[ 13.334247] MEM window: ff400000-ffbfffff
[ 13.334252] PREFETCH window: bdf00000-bfefffff
[ 13.334257] PCI: Bridge: 0000:00:1c.1
[ 13.334259] IO window: c000-cfff
[ 13.334264] MEM window: ff300000-ff3fffff
[ 13.334268] PREFETCH window: disabled.
[ 13.334273] PCI: Bridge: 0000:00:1c.2
[ 13.334274] IO window: disabled.
[ 13.334279] MEM window: disabled.
[ 13.334282] PREFETCH window: disabled.
[ 13.334297] PCI: Bridge: 0000:00:1e.0
[ 13.334298] IO window: disabled.
[ 13.334303] MEM window: ff200000-ff2fffff
[ 13.334307] PREFETCH window: disabled.
[ 13.334332] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 13.334339] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 13.334359] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 13.334364] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 13.334384] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 13.334389] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 13.334401] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 13.334411] NET: Registered protocol family 2
[ 13.384359] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 13.384409] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 13.385016] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 13.385224] TCP: Hash tables configured (established 131072 bind 65536)
[ 13.385226] TCP reno registered
[ 13.400416] checking if image is initramfs... it is
[ 13.941580] Freeing initrd memory: 7051k freed
[ 13.942178] audit: initializing netlink socket (disabled)
[ 13.942196] audit(1201623083.316:1): initialized
[ 13.942289] highmem bounce pool size: 64 pages
[ 13.944061] VFS: Disk quotas dquot_6.5.1
[ 13.944102] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 13.944190] io scheduler noop registered
[ 13.944192] io scheduler anticipatory registered
[ 13.944193] io scheduler deadline registered
[ 13.944204] io scheduler cfq registered (default)
[ 13.944221] Boot video device is 0000:00:02.0
[ 13.944369] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 13.944419] assign_interrupt_mode Found MSI capability
[ 13.944421] Allocate Port Service[0000:00:1c.0:pcie00]
[ 13.944453] Allocate Port Service[0000:00:1c.0:pcie02]
[ 13.944538] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 13.944587] assign_interrupt_mode Found MSI capability
[ 13.944589] Allocate Port Service[0000:00:1c.1:pcie00]
[ 13.944616] Allocate Port Service[0000:00:1c.1:pcie02]
[ 13.944704] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 13.944753] assign_interrupt_mode Found MSI capability
[ 13.944754] Allocate Port Service[0000:00:1c.2:pcie00]
[ 13.944782] Allocate Port Service[0000:00:1c.2:pcie02]
[ 13.944925] isapnp: Scanning for PnP cards...
[ 14.297688] isapnp: No Plug & Play device found
[ 14.316455] Real Time Clock Driver v1.12ac
[ 14.316626] hpet_resources: 0xfed00000 is busy
[ 14.316669] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 14.317631] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 14.317748] input: Macintosh mouse button emulation as /class/input/input0
[ 14.317819] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 14.318100] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 14.318164] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 14.318168] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 14.318170] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 14.318172] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 14.318174] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 14.318275] mice: PS/2 mouse device common for all mice
[ 14.318373] EISA: Probing bus 0 at eisa.0
[ 14.318406] EISA: Detected 0 cards.
[ 14.318482] TCP cubic registered
[ 14.318494] NET: Registered protocol family 1
[ 14.318511] Using IPI No-Shortcut mode
[ 14.318665] Magic number: 8:461:187
[ 14.318921] Freeing unused kernel memory: 364k freed
[ 14.322659] input: AT Translated Set 2 keyboard as /class/input/input1
[ 15.491153] AppArmor: AppArmor initialized<5>audit(1201623084.816:2): type=1505 info="AppArmor initialized" pid=1228
[ 15.496009] fuse init (API version 7.8)
[ 15.499629] Failure registering capabilities with primary security module.
[ 15.527652] ACPI: SSDT 3F7CE0C0, 06F4 (r1 AMI CPU1PM 1 INTL 20051117)
[ 15.527917] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 15.528050] ACPI: SSDT 3F7CE7C0, 0120 (r1 AMI CPU2PM 1 INTL 20051117)
[ 15.528303] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 15.530230] ACPI: Thermal Zone [THRM] (68 C)
[ 3.052000] Marking TSC unstable due to: possible TSC halt in C2.
[ 3.056000] Time: hpet clocksource has been installed.
[ 3.404000] usbcore: registered new interface driver usbfs
[ 3.404000] usbcore: registered new interface driver hub
[ 3.404000] usbcore: registered new device driver usb
[ 3.404000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 3.404000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.404000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.404000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 3.404000] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.404000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.404000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffe3fc00
[ 3.408000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.408000] usb usb1: configuration #1 chosen from 1 choice
[ 3.408000] hub 1-0:1.0: USB hub found
[ 3.408000] hub 1-0:1.0: 8 ports detected
[ 3.412000] USB Universal Host Controller Interface driver v3.0
[ 3.432000] SCSI subsystem initialized
[ 3.460000] libata version 2.21 loaded.
[ 3.516000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 3.516000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.516000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.516000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.516000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000e400
[ 3.516000] usb usb2: configuration #1 chosen from 1 choice
[ 3.516000] hub 2-0:1.0: USB hub found
[ 3.516000] hub 2-0:1.0: 2 ports detected
[ 3.620000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
[ 3.620000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.620000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.620000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.620000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000e480
[ 3.620000] usb usb3: configuration #1 chosen from 1 choice
[ 3.620000] hub 3-0:1.0: USB hub found
[ 3.620000] hub 3-0:1.0: 2 ports detected
[ 3.724000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 3.724000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.724000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.724000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.724000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[ 3.724000] usb usb4: configuration #1 chosen from 1 choice
[ 3.724000] hub 4-0:1.0: USB hub found
[ 3.724000] hub 4-0:1.0: 2 ports detected
[ 3.828000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 3.828000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.828000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.828000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 3.828000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e880
[ 3.828000] usb usb5: configuration #1 chosen from 1 choice
[ 3.828000] hub 5-0:1.0: USB hub found
[ 3.828000] hub 5-0:1.0: 2 ports detected
[ 3.932000] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 3.932000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 3.932000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 3.932000] eth0: RTL8168b/8111b at 0xf881a000, 00:16:17:51:bd:b6, XID 38000000 IRQ 17
[ 3.936000] ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 3.984000] usb 1-6: new high speed USB device using ehci_hcd and address 3
[ 3.984000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[ff200000-ff2007ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 3.988000] ata_piix 0000:00:1f.2: version 2.11
[ 3.988000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 3.988000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
[ 3.988000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 3.988000] scsi0 : ata_piix
[ 3.988000] scsi1 : ata_piix
[ 3.988000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
[ 3.988000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
[ 4.000000] Clocksource tsc unstable (delta = -350825621 ns)
[ 4.152000] ata1.00: ATA-7: FUJITSU MHV2100BH PL, 00000029, max UDMA/100
[ 4.152000] ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.168000] ata1.00: configured for UDMA/100
[ 4.256000] usb 1-6: configuration #1 chosen from 1 choice
[ 4.488000] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PA02, max UDMA/33
[ 4.496000] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 4.660000] ata2.00: configured for UDMA/33
[ 4.660000] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2100B 0000 PQ: 0 ANSI: 5
[ 4.664000] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T10N PA02 PQ: 0 ANSI: 5
[ 4.668000] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[ 4.668000] sd 0:0:0:0: [sda] Write Protect is off
[ 4.668000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.668000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.668000] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[ 4.668000] sd 0:0:0:0: [sda] Write Protect is off
[ 4.668000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.668000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.668000] sda:<6>usb 2-1: configuration #1 chosen from 1 choice
[ 4.748000] sda1 sda2 sda3
[ 4.748000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.752000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.752000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.768000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.768000] Uniform CD-ROM driver Revision: 3.20
[ 4.768000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.956000] usbcore: registered new interface driver hiddev
[ 4.968000] input: A4Tech PS/2+USB Mouse as /class/input/input2
[ 4.968000] input: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1d.0-1
[ 4.968000] usbcore: registered new interface driver usbhid
[ 4.968000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 5.016000] Attempting manual resume
[ 5.016000] swsusp: Resume From Partition 8:1
[ 5.016000] PM: Checking swsusp image.
[ 5.016000] PM: Resume from disk failed.
[ 5.056000] kjournald starting. Commit interval 5 seconds
[ 5.056000] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.260000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00dc1000f7e4ef00]
[ 11.264000] intel_rng: FWH not detected
[ 11.304000] iTCO_vendor_support: vendor-support=0
[ 11.308000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 11.308000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0860)
[ 11.308000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.344000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 11.348000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.440000] input: PC Speaker as /class/input/input3
[ 11.516000] Linux agpgart interface v0.102 (c) Dave Jones
[ 11.612000] agpgart: Detected an Intel 945GM Chipset.
[ 11.612000] agpgart: Detected 7932K stolen memory.
[ 11.628000] agpgart: AGP aperture is 256M @ 0xd0000000
[ 11.648000] sdhci: Secure Digital Host Controller Interface driver
[ 11.648000] sdhci: Copyright(c) Pierre Ossman
[ 11.648000] sdhci: SDHCI controller found at 0000:01:04.2 [1217:7120] (rev 1)
[ 11.648000] ACPI: PCI Interrupt 0000:01:04.2[A] -> GSI 16 (level, low) -> IRQ 16
[ 11.648000] sdhci:slot0: Unknown controller version (16). You may experience problems.
[ 11.648000] mmc0: SDHCI at 0xff202000 irq 16 PIO
[ 11.908000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
[ 11.936000] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[ 12.028000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17
[ 12.028000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 12.252000] ieee80211_init: failed to initialize WME (err=-17)
[ 12.268000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_unregister
[ 12.268000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_put
[ 12.268000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_get
[ 12.268000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_register
[ 12.268000] wmaster0: Selected rate control algorithm 'simple'
[ 12.320000] usbcore: registered new interface driver rt73usb
[ 12.952000] lp: driver loaded but no devices found
[ 13.036000] Adding 4000144k swap on /dev/sda1. Priority:-1 extents:1 across:4000144k
[ 13.336000] EXT3 FS on sda2, internal journal
[ 14.060000] kjournald starting. Commit interval 5 seconds
[ 14.060000] EXT3 FS on sda3, internal journal
[ 14.060000] EXT3-fs: mounted filesystem with ordered data mode.