Принтер Canon 4300
kubuntu 7.10
помощи не прошу - принтер работает
Делал так как описано на офсайте ubuntu :
1. Connect your printer, and start Ubuntu.
2. Install the needed packages: alien, libxml1, libpng12-0, libpng12-dev, libgtk1.2 and libgtk1.2-common with Synaptic or type:
sudo apt-get update
sudo apt-get install alien libxml1 libpng12-0 libpng12-dev libgtk1.2 libgtk1.2-common
3. Download the drivers for your printer from Canon. For the purposes of this howto, we will assume that the files are saved to the directory /home/yourname/canon.
The iP4200 drivers are here: [WWW]
http://software.canon-europe.com/software/0024302.asp or type in a terminal
mkdir canon
cd canon
wget
http://software.canon-europe.com/files/soft24302/software/iP4200_Linux_260.tar.gz 4. Extract the files with archive manager or type
tar -xvzf iP4200_Linux_260.tar.gz
5. Convert the RPM packages to Debian packages:
sudo alien cnijfilter-common-2.60-1.i386.rpm cnijfilter-ip4200-2.60-1.i386.rpm
6. Install the packages:
sudo dpkg -i *.deb
7. Make sure the library links are correct. /usr/lib/libtiff.so.3 should point to /usr/lib/libtiff.so.4 (or to the same thing as /usr/lib/libtiff.so.4 points to) If not, type:
sudo ln -s /usr/lib/libtiff.so.4 /usr/lib/libtiff.so.3
This is the important part! The iP4200 driver wants to use libtiff.so.3, but that is an old version. We fix this by making libtiff.so.3 a link to libtiff.so.4.
Also, /usr/lib/libpng.so.3 should point to /usr/lib/libpng.so If not, type:
sudo ln -s /usr/lib/libpng.so /usr/lib/libpng.so.3
and /usr/lib/libxml2.so.2 should point to /usr/lib/libxml.so.1 If not, type:
sudo ln -s /usr/lib/libxml2.so.2 /usr/lib/libxml.so.1
And finally make the loader aware of the changes:
sudo ldconfig
8. Restart cups:
sudo /etc/init.d/cupsys restart
Дрова по ссылке не заработали может недокрутил поэтому добавил ftp://download.canon.jp/pub/driver/bj/linux/ где дрова на Canon версии IP4300 и вся документация с иероглифами + обновил все что связано с Cups(ys)
+sudo chmod 777 /dev/usb/lpo