Здравствуйте, помогите пожалуйста мне. Сам я новичок, не разбираюсь в линукс, так что пожалуйста не накидывайтесь на меня с телепатами и подобное. Всё что скажете по теме выложу для решения, я просто незнаю что надо выкладывать.
Проблема вот вчём, Телевизор подключен к компьютеру через кабель S-Video, а изображение невыводиться. В Windowsе всё в порядке.
Использую ОС: Ubuntu 9.10 - Karmic Koala - выпущенный в октябре 2009 года
Видеокарта: ATI Radeon X1950Pro Saphire
Данные
uname -ahome@pc:~$ uname -a
Linux pc 2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 i686 GNU/Linux
Данные
zrandrhome@pc:~$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1200, maximum 1920 x 1920
DVI-1 disconnected (normal left inverted right x axis y axis)
DVI-0 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm
1920x1200 60.0*+
1600x1200 60.0
1280x1024 60.0
1280x960 60.0
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
Данные
xvattrhome@pc:~$ xvattr
Found Xv 2.2
Где - то скопировал
sudo nano /etc/X11/xorg.confSection "Device"
Option "TVDACLoadDetect" "true" # [<bool>] Включаем отождествление tv
Option "ForceTVOut" "true" # [<bool>] Форсируем дефиниция тв
Option "TVStandard" "pal" # <str> выбираем рутина У меня тока PAL(
Identifier "Radeon 9600"
Driver "ati"
BusID "PCI:1:0:0"
EndSection
Данные
aticonfighome@pc:~$ aticonfig
aticonfig: No supported adapters detected
Данные
sudo X -configurehome@pc:~$ sudo X -configure
Fatal server error:
Server is already active for display 0
If this server is no longer running, remove /tmp/.X0-lock
and start again.
Please consult the The X.Org Foundation support
at
http://wiki.x.org for help.
ddxSigGiveUp: Closing log
Данные
glxinfo |grep vendorhome@pc:~$ glxinfo |grep vendor
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 135 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 16
Current serial number in output stream: 16
Данные
lspci -nn | grep VGAhome@pc:~$ lspci -nn | grep VGA
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV570 [Radeon X1950 Pro] [1002:7280]
Данные
tvonhome@pc:~$ tvon
X Error of failed request: BadRROutput (invalid Output parameter)
Major opcode of failed request: 150 (RANDR)
Minor opcode of failed request: 15 (RRGetOutputProperty)
Serial number of failed request: 24
Current serial number in output stream: 24
X Error of failed request: BadRROutput (invalid Output parameter)
Major opcode of failed request: 150 (RANDR)
Minor opcode of failed request: 15 (RRGetOutputProperty)
Serial number of failed request: 24
Current serial number in output stream: 24
xrandr: cannot find output "S-video"
Found Xv 2.2
No adaptor
Данные
glxinfo | grep directhome@pc:~$ glxinfo | grep direct
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 135 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 16
Current serial number in output stream: 16
Данные
sudo modprobe fglrxhome@pc:~$ sudo modprobe fglrx
FATAL: Error inserting fglrx (/lib/modules/2.6.31-16-generic/updates/dkms/fglrx.ko): Cannot allocate memory
Данные
dmesg | egrep "drm|radeon"home@pc:~$ dmesg | egrep "drm|radeon"
[ 3937.780473] [fglrx:drm_alloc] *ERROR* [driver] Allocating 0 bytes
Данные
xf86-video-atihome@pc:~$ xf86-video-ati
xf86-video-ati: command not found
Данные
fglrxhome@pc:~$ fglrx
fglrx: command not found
Данные
sudo atitvout -f lhome@pc:~$ sudo atitvout -f l
Forcing Rage Mobility/Rage 3D Pro LT mode
VBE call failed.
Maybe this command is not supported by your graphics adapter?
Did your parameters (if you specified some) really make sense?
Please try all other available commands before complaining!
Больше незнаю что надо предоставить для решения проблемы, но изображение так и не выводиться.