Как включить в WI-FI адаптере автопоиск каналов

[alex000000]

WI-FI адаптер никаким  образом не хочет соединяться с маршрутизатором. Где-то в интернете прочитал, что такое может быть, если в адаптере отключен автопоиск каналов. Wicd пробовал. Система 11.10.

[AnrDaemon]

Переведите на русский "не хочет соединяться". Не видит SSID? А другие устройства видят?
И прежде чем пытаться что-то включить хорошо бы убедиться, что проблема именно в этом, вы не находите?

[alex000000]

Всё видит а соединятся не хочет. Другие все соединяются.

[AnrDaemon]

Лог попытки соединения - ?

[alex000000]

Лог попытки соединения - ?

А где он находится?

[victor00000]

dmesg

[AnrDaemon]

syslog вообще-то.
Возможно, потребуется запустить wpa_supplicant в режиме отладки. (-d)

[alex000000]

dmesg

dmesg
wlan1, wlan0 работает.

(Нажмите, чтобы показать/скрыть)

mBm)
[   19.104682] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   19.104684] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.104685] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   19.104687] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.104689] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   19.104691] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.104692] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   19.104694] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.104695] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   19.104697] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.104699] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   19.104701] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.104702] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   19.104704] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.104706] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   19.104707] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   19.104709] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   19.107328] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   19.107330] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.107332] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   19.107334] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.107336] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   19.107338] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.107339] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   19.107341] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.107343] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   19.107344] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.107346] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   19.107348] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.107349] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   19.107351] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.107353] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   19.107355] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.107356] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   19.107358] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.107360] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   19.107362] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.107363] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   19.107365] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.107367] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   19.107369] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   19.107370] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   19.107372] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   19.107374] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   19.107376] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   19.112113] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[   19.117792] udevd[455]: renamed network interface wlan0 to wlan1
[   19.117816] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[   19.118282] cfg80211: Calling CRDA for country: AM
[   19.118309] Registered led device: ath9k-phy0
[   19.118312] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xf85e0000, irq=19
[   19.128796] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   19.128800] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.128801] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   19.128804] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.128805] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   19.128807] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.128808] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   19.128810] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.128812] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   19.128813] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.128815] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   19.128817] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.128820] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   19.128822] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.128823] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   19.128825] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.128827] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   19.128829] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.128830] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   19.128832] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.128833] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   19.128835] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.128837] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   19.128839] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input6
[   19.128845] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.128846] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   19.128848] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.128849] cfg80211: Disabling freq 2484 MHz
[   19.128853] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   19.128855] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.128857] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   19.128858] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.128860] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   19.128862] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.128863] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   19.128865] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.128866] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   19.128868] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.128870] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   19.128871] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.128873] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   19.128875] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.128876] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   19.128878] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.128879] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   19.128881] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.128882] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   19.128884] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.128886] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   19.128887] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.128889] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   19.128891] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.128892] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   19.128894] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.128895] cfg80211: Disabling freq 2484 MHz
[   19.128898] cfg80211: Regulatory domain changed to country: AM
[   19.128899] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   19.128901] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   19.128902] cfg80211:     (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 1800 mBm)
[   19.128904] cfg80211:     (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 1800 mBm)
[   19.128943] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input7
[   19.564328] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   19.795598] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   20.018536] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[   20.018539] vesafb: scrolling: redraw
[   20.018542] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[   20.019396] vesafb: framebuffer at 0xfb000000, mapped to 0xfae80000, using 8128k, total 8128k
[   20.019602] Console: switching to colour frame buffer device 240x67
[   20.019647] fb0: VESA VGA frame buffer device
[   21.232915] ppdev: user-space parallel port driver
[   21.239443] type=1400 audit(1325164377.853:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1055 comm="apparmor_parser"
[   21.240103] type=1400 audit(1325164377.857:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1055 comm="apparmor_parser"
[   21.291573] rtl8192cu: MAC auto ON okay!
[   21.324580] rtl8192cu: Tx queue select: 0x05
[   21.325589] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cufw.bin
[   21.349989] type=1400 audit(1325164377.965:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1071 comm="apparmor_parser"
[   21.351782] type=1400 audit(1325164377.965:: apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1072 comm="apparmor_parser"
[   21.352276] type=1400 audit(1325164377.969:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1072 comm="apparmor_parser"
[   21.352492] type=1400 audit(1325164377.969:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1072 comm="apparmor_parser"
[   21.352930] type=1400 audit(1325164377.969:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1075 comm="apparmor_parser"
[   21.518575] init: failsafe main process (993) killed by TERM signal
[   21.520645] init: apport pre-start process (1127) terminated with status 1
[   21.534193] init: apport post-stop process (1159) terminated with status 1
[   21.597641] Bluetooth: Core ver 2.16
[   21.597665] NET: Registered protocol family 31
[   21.597666] Bluetooth: HCI device and connection manager initialized
[   21.597669] Bluetooth: HCI socket layer initialized
[   21.597670] Bluetooth: L2CAP socket layer initialized
[   21.597675] Bluetooth: SCO socket layer initialized
[   21.599335] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   21.599338] Bluetooth: BNEP filters: protocol multicast
[   21.629291] Bluetooth: RFCOMM TTY layer initialized
[   21.629296] Bluetooth: RFCOMM socket layer initialized
[   21.629297] Bluetooth: RFCOMM ver 1.11
[   21.693542] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   21.712545] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.715086] forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X
[   22.281055] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[   22.382776] EXT4-fs (sda6): re-mounted. Opts: commit=0
[   23.773089] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[   24.224023] wlan0: authenticate with 1c:bd:b9:2a:5a:cc (try 1)
[   24.240097] wlan0: authenticated
[   24.260028] wlan0: associate with 1c:bd:b9:2a:5a:cc (try 1)
[   24.266028] wlan0: RX AssocResp from 1c:bd:b9:2a:5a:cc (capab=0xc31 status=0 aid=2)
[   24.266032] wlan0: associated
[   24.266036] wlan0: moving STA 1c:bd:b9:2a:5a:cc to state 1
[   24.266037] wlan0: moving STA 1c:bd:b9:2a:5a:cc to state 2
[   24.273206] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   24.273743] cfg80211: Calling CRDA for country: GB
[   24.278671] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   24.278675] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   24.278677] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   24.278679] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   24.278681] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   24.278682] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   24.278684] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   24.278686] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   24.278687] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   24.278689] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   24.278690] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   24.278692] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   24.278694] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   24.278696] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   24.278697] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   24.278699] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   24.278700] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   24.278702] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   24.278704] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   24.278705] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   24.278707] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   24.278709] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   24.278710] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   24.278712] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   24.278713] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   24.278715] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   24.278717] cfg80211: Disabling freq 2484 MHz
[   24.278765] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   24.278767] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   24.278769] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   24.278771] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   24.278773] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   24.278774] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   24.278776] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   24.278778] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   24.278780] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   24.278782] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   24.278783] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   24.278785] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   24.278787] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   24.278788] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   24.278790] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   24.278792] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   24.278793] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   24.278795] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   24.278797] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   24.278799] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   24.278800] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   24.278802] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   24.278804] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   24.278806] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   24.278807] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   24.278809] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   24.278811] cfg80211: Disabling freq 2484 MHz
[   24.278814] cfg80211: Regulatory domain changed to country: GB
[   24.278815] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   24.278817] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   24.278819] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   24.278820] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   24.278822] cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[   24.294172] wlan0: moving STA 1c:bd:b9:2a:5a:cc to state 3
[   24.986046] EXT4-fs (sda6): re-mounted. Opts: commit=0
[   29.006234] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[   31.888023] eth0: no IPv6 routers present
[   34.320039] wlan0: no IPv6 routers present
[   45.204482] wlan1: authenticate with 1c:bd:b9:2a:5a:cc (try 1)
[   45.221617] wlan1: authenticated
[   45.244477] wlan1: associate with 1c:bd:b9:2a:5a:cc (try 1)
[   45.272368] wlan1: RX AssocResp from 1c:bd:b9:2a:5a:cc (capab=0xc31 status=0 aid=3)
[   45.272371] wlan1: associated
[   45.272374] wlan1: moving STA 1c:bd:b9:2a:5a:cc to state 1
[   45.272375] wlan1: moving STA 1c:bd:b9:2a:5a:cc to state 2
[   45.285796] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   55.292127] wlan1: disassociating from 1c:bd:b9:2a:5a:cc by local choice (reason=3)
[   55.304892] wlan1: moving STA 1c:bd:b9:2a:5a:cc to state 1
[   55.304894] wlan1: moving STA 1c:bd:b9:2a:5a:cc to state 0
[   55.312372] wlan1: deauthenticating from 1c:bd:b9:2a:5a:cc by local choice (reason=3)
[   55.440025] wlan1: no IPv6 routers present
[   56.032794] wlan1: authenticate with 1c:bd:b9:2a:5a:cc (try 1)
[   56.232045] wlan1: authenticate with 1c:bd:b9:2a:5a:cc (try 2)
[   56.432046] wlan1: authenticate with 1c:bd:b9:2a:5a:cc (try 3)
[   56.632038] wlan1: authentication with 1c:bd:b9:2a:5a:cc timed out
[  253.829063] wlan0: deauthenticating from 1c:bd:b9:2a:5a:cc by local choice (reason=3)
[  253.904158] wlan0: moving STA 1c:bd:b9:2a:5a:cc to state 2
[  253.904167] wlan0: moving STA 1c:bd:b9:2a:5a:cc to state 1
[  253.904173] wlan0: moving STA 1c:bd:b9:2a:5a:cc to state 0
[  253.968232] cfg80211: All devices are disconnected, going to restore regulatory settings
[  253.968246] cfg80211: Restoring regulatory settings
[  253.968256] cfg80211: Calling CRDA to update world regulatory domain
[  253.976406] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[  253.976410] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  253.976412] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[  253.976414] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  253.976415] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[  253.976417] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  253.976419] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[  253.976420] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  253.976422] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[  253.976424] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  253.976425] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[  253.976427] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  253.976428] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[  253.976430] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  253.976432] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[  253.976433] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  253.976435] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[  253.976437] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  253.976438] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[  253.976440] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  253.976441] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[  253.976443] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  253.976445] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[  253.976447] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  253.976448] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[  253.976450] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  253.976451] cfg80211: Disabling freq 2484 MHz
[  253.976507] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[  253.976509] cfg80211: World regulatory domain updated:
[  253.976511] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  253.976513] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  253.976514] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  253.976516] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  253.976518] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  253.976519] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
alex@alex:~$

Пользователь решил продолжить мысль 29 Декабря 2011, 17:35:40:

syslog вообще-то.
Возможно, потребуется запустить wpa_supplicant в режиме отладки. (-d)

tail /var/log/syslog

(Нажмите, чтобы показать/скрыть)

alex@alex:~$ tail /var/log/syslog
Dec 29 17:38:45 alex NetworkManager[1030]: <info> Activation (wlan1) Stage 2 of 5 (Device Configure) starting...
Dec 29 17:38:45 alex NetworkManager[1030]: <info> (wlan1): device state change: prepare -> config (reason 'none') [40 50 0]
Dec 29 17:38:45 alex NetworkManager[1030]: <info> Activation (wlan1/wireless): connection 'dlink 1' has security, and secrets exist.  No new secrets needed.
Dec 29 17:38:45 alex NetworkManager[1030]: <info> Config: added 'ssid' value 'dlink'
Dec 29 17:38:45 alex NetworkManager[1030]: <info> Config: added 'scan_ssid' value '1'
Dec 29 17:38:45 alex NetworkManager[1030]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Dec 29 17:38:45 alex NetworkManager[1030]: <info> Config: added 'psk' value '<omitted>'
Dec 29 17:38:45 alex NetworkManager[1030]: <info> Activation (wlan1) Stage 2 of 5 (Device Configure) complete.
Dec 29 17:38:45 alex NetworkManager[1030]: <info> Config: set interface ap_scan to 1
Dec 29 17:38:45 alex NetworkManager[1030]: <info> (wlan1): supplicant interface state: inactive -> scanning
alex@alex:~$

[AnrDaemon]

Если я правильно читаю логи, всё у вас переключается.

[alex000000]

Я и сам это заметил. Но почему Atheros соединяется, а Realtek нет. Предистория такова: на ноуте стояла Linux Mint 11 Росинка, родной вай-фай Atheros wlan0. Воткнул этот свисток-не работает (ситема его не видит как wrelles, только в lsusb - фирма Netgear INK.). Подсунул виндовые дрова: определился как Realtek и заработал нормально как wlan1. Надо было установить другое ядро. Установил 3.01 - всё нормально. Установил 3.02 - он слетел (виден только в lsusb), и никакими судьбами включить его не удалось. Принял кардинальное решение - переустановил систему полностью, но при попытке подсунуть тот же драйвер Windows, система сообщает "неправильный драйвер". В UBUNTU 11.10 есть драйвер для этого чипа, система всё видит, но установить соединение не может ни с автоматическими настройками ни с ручными. В Wicd тоже самое, запрашивает ключ, вертится иконка в трее, а после сообщает, что соединение не установлено. Кстати пробовал ставить ядра вплоть до последнего, всё тоже самое. Сейчас на десктопе тоже всё система видит, а соединения нет.
P.S. Облазил практически все русскоязычные форумы Линукса (иностранные тоже посмотрел немного, так как по английской фене не ботаю), но ничего подходящего мне по данной теме не встретил.