Как настроить? Вот что известно о моем модеме:
This information reflects the current status of your DSL connection.
Line Rate - Upstream (Kbps): 1023
Line Rate - Downstream (Kbps): 17389
LAN IP Address: 192.168.1.1
Default Gateway:
Primary DNS Server: 192.168.1.1
Secondary DNS Server: 192.168.1.1
Device Info -- Route
Flags: U - up, ! - reject, G - gateway, H - host, R - reinstate
D - dynamic (redirect), M - modified (redirect).
Destination Gateway Subnet Mask Flag Metric Service Interface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 br0
Device Info -- ARP
IP address Flags HW Address Device
192.168.1.2 Complete 00:17:31:B2:98:2D br0
Device Info -- DHCP Leases
Hostname MAC Address IP Address Expires In
cc74a76d14e44d4 00:17:31:B2:98:2D 192.168.1.2 23 hours, 56 minutes, 14 seconds
Local Area Network (LAN) Setup
Configure the DSL Router IP Address and Subnet Mask for LAN interface. Save button only saves the LAN configuration data. Save/Reboot button saves the LAN configuration data and reboots the router to make the new configuration effective.
Какие цифры мне вводить? В Auto eth0 я всавила свои данные, но подключить это соединение не могу, оно не показывается. DSL соединение не подключается и редактировать я его не могу.