:~$ lspciDLink 504T adsl модем коннектится с компом по этой карте и работает без проблем:
02:00.0 Ethernet controller: Atheros Communications Inc. Attansic L1 Gigabit Ethernet (rev b0)
LAN шнурок второго провайдера воткнут в роутер
Zyxel EE330 и коннектится с компом по этой карте , которая (далее по тексту) не активируется без шаманства в xnetcardconfig :
05:01.0 Ethernet controller: Sundance Technology Inc / IC Plus Corp IC Plus IP100A Integrated 10/100 Ethernet MAC + PHY (rev 31)
:~$ lspci -knn | grep "Eth\|Net" -A2 02:00.0 Ethernet controller [0200]: Atheros Communications Inc. Attansic L1 Gigabit Ethernet [1969:1048] (rev b0)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8226]
Kernel driver in use: atl1
--
05:01.0 Ethernet controller [0200]: Sundance Technology Inc / IC Plus Corp IC Plus IP100A Integrated 10/100 Ethernet MAC + PHY [13f0:0200] (rev 31)
Subsystem: ASUSTeK Computer Inc. NX1001 [1043:8213]
Kernel driver in use: sundance
:~$ cat /etc/udev/rules.d/70-persistent-net.rules # This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x13f0:/sys/devices/pci0000:00/0000:00:1e.0/0000:05:01.0 (sundance)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}==
"00:1f:c6:34:4d:d8", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
mac адрес в ifconfig для этой карты также
00:1f:c6:34:4d:d8 это "рабочее" соединение и мас адрес карты также совпадает с возвратом в ifconfig
00:1f:c6:b9:e3:ad# PCI device 0x1969:/sys/devices/pci0000:00/0000:00:1c.5/0000:02:00.0 (atl1)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}==
"00:1f:c6:b9:e3:ad", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"