#
# WARNING: heavily refactored in 0.9.0 release. Please review and
# customize settings for your setup.
#
# Changes: in most of the cases you should not modify this
# file, but provide customizations in jail.local file,
# or separate .conf files under jail.d/ directory, e.g.:
#
# HOW TO ACTIVATE JAILS:
#
# YOU SHOULD NOT MODIFY THIS FILE.
#
# It will probably be overwritten or improved in a distribution update.
#
# Provide customizations in a jail.local file or a jail.d/customisation.local.
# For example to change the default bantime for all jails and to enable the
# ssh-iptables jail the following (uncommented) would appear in the .local file.
# See man 5 jail.conf for details.
#
# [DEFAULT]
# bantime = 3600
#
# [sshd]
# enabled = true
#
# See jail.conf(5) man page for more information
# Comments: use '#' for comment lines and ';' (following a space) for inline comments
[INCLUDES]
#before = paths-distro.conf
before = paths-debian.conf
# The DEFAULT allows a global definition of the options. They can be overridden
# in each jail afterwards.
[DEFAULT]
#
# MISCELLANEOUS OPTIONS
#
# "ignoreip" can be an IP address, a CIDR mask or a DNS host. Fail2ban will not
# ban a host which matches an address in this list. Several addresses can be
# defined using space separator.
ignoreip = 127.0.0.1/8
# External command that will take an tagged arguments to ignore, e.g. <ip>,
# and return true if the IP is to be ignored. False otherwise.
#
# ignorecommand = /path/to/command <ip>
ignorecommand =
# "bantime" is the number of seconds that a host is banned.
bantime = 600
# A host is banned if it has generated "maxretry" during the last "findtime"
# seconds.
findtime = 600
# "maxretry" is the number of failures before a host get banned.
maxretry = 5
# "backend" specifies the backend used to get files modification.
# Available options are "pyinotify", "gamin", "polling", "systemd" and "auto".
# This option can be overridden in each jail as well.
#
# pyinotify: requires pyinotify (a file alteration monitor) to be installed.
# If pyinotify is not installed, Fail2ban will use auto.
# gamin: requires Gamin (a file alteration monitor) to be installed.
# If Gamin is not installed, Fail2ban will use auto.
# polling: uses a polling algorithm which does not require external libraries.
# systemd: uses systemd python library to access the systemd journal.
# Specifying "logpath" is not valid for this backend.
# See "journalmatch" in the jails associated filter config
# auto: will try to use the following backends, in order:
# pyinotify, gamin, polling.
#
# Note: if systemd backend is choses as the default but you enable a jail
# for which logs are present only in its own log files, specify some other
# backend for that jail (e.g. polling) and provide empty value for
# journalmatch. See
https://github.com/fail2ban/fail2ban/issues/959#issuecomment-74901200backend = auto
# "usedns" specifies if jails should trust hostnames in logs,
# warn when DNS lookups are performed, or ignore all hostnames in logs
#
# yes: if a hostname is encountered, a DNS lookup will be performed.
# warn: if a hostname is encountered, a DNS lookup will be performed,
# but it will be logged as a warning.
# no: if a hostname is encountered, will not be used for banning,
# but it will be logged as info.
usedns = warn
# "logencoding" specifies the encoding of the log files handled by the jail
# This is used to decode the lines from the log file.
# Typical examples: "ascii", "utf-8"
#
# auto: will use the system locale setting
logencoding = auto
# "enabled" enables the jails.
# By default all jails are disabled, and it should stay this way.
# Enable only relevant to your setup jails in your .local or jail.d/*.conf
#
# true: jail will be enabled and log files will get monitored for changes
# false: jail is not enabled
enabled = false
# "filter" defines the filter to use by the jail.
# By default jails have names matching their filter name
#
filter = %(__name__)s
#
# ACTIONS
#
# Some options used for actions
# Destination email address used solely for the interpolations in
# jail.{conf,local,d/*} configuration files.
destemail = root@localhost
# Sender email address used solely for some actions
sender = root@localhost
# E-mail action. Since 0.8.1 Fail2Ban uses sendmail MTA for the
# mailing. Change mta configuration parameter to mail if you want to
# revert to conventional 'mail'.
mta = sendmail
# Default protocol
protocol = tcp
# Specify chain where jumps would need to be added in iptables-* actions
chain = INPUT
# Ports to be banned
# Usually should be overridden in a particular jail
port = 0:65535
#
# Action shortcuts. To be used to define action parameter
# Default banning action (e.g. iptables, iptables-new,
# iptables-multiport, shorewall, etc) It is used to define
# action_* variables. Can be overridden globally or per
# section within jail.local file
banaction = iptables-multiport
# The simplest action to take: ban only
action_ = %(banaction)s[name=%(__name__)s, bantime="%(bantime)s", port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"]
# ban & send an e-mail with whois report to the destemail.
action_mw = %(banaction)s[name=%(__name__)s, bantime="%(bantime)s", port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"]
%(mta)s-whois[name=%(__name__)s, dest="%(destemail)s", protocol="%(protocol)s", chain="%(chain)s"]
# ban & send an e-mail with whois report and relevant log lines
# to the destemail.
action_mwl = %(banaction)s[name=%(__name__)s, bantime="%(bantime)s", port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"]
%(mta)s-whois-lines[name=%(__name__)s, dest="%(destemail)s", logpath=%(logpath)s, chain="%(chain)s"]
# See the IMPORTANT note in action.d/xarf-login-attack for when to use this action
#
# ban & send a xarf e-mail to abuse contact of IP address and include relevant log lines
# to the destemail.
action_xarf = %(banaction)s[name=%(__name__)s, bantime="%(bantime)s", port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"]
xarf-login-attack[service=%(__name__)s, sender="%(sender)s", logpath=%(logpath)s, port="%(port)s"]
# ban IP on CloudFlare & send an e-mail with whois report and relevant log lines
# to the destemail.
action_cf_mwl = cloudflare[cfuser="%(cfemail)s", cftoken="%(cfapikey)s"]
%(mta)s-whois-lines[name=%(__name__)s, dest="%(destemail)s", logpath=%(logpath)s, chain="%(chain)s"]
# Report block via blocklist.de fail2ban reporting service API
#
# See the IMPORTANT note in action.d/blocklist_de.conf for when to
# use this action. Create a file jail.d/blocklist_de.local containing
# [Init]
# blocklist_de_apikey = {api key from registration]
#
action_blocklist_de = blocklist_de
# Report ban via badips.com, and use as blacklist
#
# See BadIPsAction docstring in config/action.d/badips.py for
# documentation for this action.
#
# NOTE: This action relies on banaction being present on start and therefore
# should be last action defined for a jail.
#
action_badips = badips.py[category="%(name)s", banaction="%(banaction)s"]
# Choose default action. To change, just override value of 'action' with the
# interpolation to the chosen action shortcut (e.g. action_mw, action_mwl, etc) in jail.local
# globally (section [DEFAULT]) or per specific section
action = %(action_)s
#
# JAILS
#
#
# SSH servers
#
[sshd]
port = 9999
findtime = 3600
maxretry = 3
bantime = 86400
logpath = %(sshd_log)s
[sshd-ddos]
# This jail corresponds to the standard configuration in Fail2ban.
# The mail-whois action send a notification e-mail with a whois request
# in the body.
port = 9999
findtime = 3600
maxretry = 3
bantime = 86400
logpath = %(sshd_log)s
[dropbear]
port = 9999
findtime = 3600
maxretry = 3
bantime = 86400
logpath = %(dropbear_log)s
[selinux-ssh]
port = 9999
findtime = 3600
maxretry = 3
bantime = 86400
logpath = %(auditd_log)s
и так далее....
Тема: помогите разобраться с fail2ban (Прочитано 1332 раз)
