Добрый день.
народ, помогите, я уже совсем соображать перестала, мучаюсь вторую неделю...
чего не хватает ей для установки?
прога отсюда:
http://espressomd.org/ вроде все установила, что она запрашивала, но даже при установленных библиотеках она жалуется, что не видит:
****************************************************************
* Configuration summary *
****************************************************************
platform detected = x86_64-unknown-linux-gnu
package version = 3.3.1
development sources = no
Compiler
--------
compiler = mpic++
linker = /usr/bin/ld -m elf_x86_64
c++ compiler flags = -Wall -O3
c++ preprocessor flags = -I/usr/share/ActiveTcl8.6.4.1.299124-linux-x86_64-threaded/payload/include
linker flags =
libraries = -ltcl8.6 -lfftw3 -lm
using debug flags =
using profiling flags =
Libraries
---------
FFTW = yes
efence = no
Tcl/Tk
------
Tcl version = tcl8.6
Tk version = none
Python
------
python = /usr/bin/python
build python interface = no
Other settings
--------------
config = myconfig.hpp
installation prefix = /home/antonina/Espresso
number of test tasks = 3
mympiexec = /home/antonina/espresso/espresso-3.3.1/mympiexec.sh
mpiexec = /usr/bin/mpiexec
pdflatex = /usr/bin/pdflatex
makeindex = /usr/bin/makeindex
bibtex = /usr/bin/bibtex
doxygen = /usr/bin/doxygen
dot = /usr/bin/dot
CUDA disabled or not supported.
вот полный лог:
antonina@antonina-desktop:~/espresso/espresso-3.3.1$ sudo ./configure
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
/home/antonina/espresso/espresso-3.3.1/config/missing: Unknown '--is-lightweight' option
Try '/home/antonina/espresso/espresso-3.3.1/config/missing --help' for more information
configure: WARNING: 'missing' script is too old or missing
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether UID '0' is supported by ustar format... yes
checking whether GID '0' is supported by ustar format... yes
checking how to create a ustar tar archive... gnutar
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... (cached) yes
checking whether we are using development sources... no
****************************************************************
* Checking compiler characteristics and MPI support *
****************************************************************
checking for style of include used by make... GNU
checking whether to compile using MPI... yes
checking for mpic++... mpic++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking dependency style of mpic++... gcc3
checking for function MPI_Init... yes
checking for mpi.h... yes
checking for mpiexec... /usr/bin/mpiexec
checking for the mympiexec user script... /home/antonina/espresso/espresso-3.3.1/mympiexec.sh
checking whether the compiler accepts -O3... yes
checking whether the compiler accepts -Wall... yes
checking whether mpic++ understands -c and -o together... yes
****************************************************************
* Checking for programs *
****************************************************************
checking how to print strings... printf
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking how to run the C++ preprocessor... mpic++ -E
checking for ld used by mpic++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the mpic++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for mpic++ option to produce PIC... -fPIC -DPIC
checking if mpic++ PIC flag -fPIC -DPIC works... yes
checking if mpic++ static flag -static works... no
checking if mpic++ supports -c -o file.o... yes
checking if mpic++ supports -c -o file.o... (cached) yes
checking whether the mpic++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for gawk... (cached) mawk
checking for egrep... (cached) /bin/grep -E
checking whether ln -s works... yes
checking for doxygen... /usr/bin/doxygen
checking for dot... /usr/bin/dot
checking for pdflatex... /usr/bin/pdflatex
checking for makeindex... /usr/bin/makeindex
checking for bibtex... /usr/bin/bibtex
****************************************************************
* Checking for standard headers *
****************************************************************
checking for ANSI C header files... (cached) yes
checking arpa/inet.h usability... yes
checking arpa/inet.h presence... yes
checking for arpa/inet.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking float.h usability... yes
checking float.h presence... yes
checking for float.h... yes
checking for inttypes.h... (cached) yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking stddef.h usability... yes
checking stddef.h presence... yes
checking for stddef.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for strings.h... (cached) yes
checking sys/file.h usability... yes
checking sys/file.h presence... yes
checking for sys/file.h... yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
****************************************************************
* Checking for standard functions *
****************************************************************
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for working memcmp... yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible realloc... yes
checking sys/select.h usability... yes
checking sys/select.h presence... yes
checking for sys/select.h... yes
checking for sys/socket.h... (cached) yes
checking types of arguments for select... int,fd_set *,struct timeval *
checking for size_t... yes
checking for working strtod... yes
checking for atexit... yes
checking for floor... yes
checking for getcwd... yes
checking for gethostbyname... yes
checking for memset... yes
checking for pow... yes
checking for rint... yes
checking for select... yes
checking for socket... yes
checking for sqrt... yes
****************************************************************
* Checking for required tools and libraries *
****************************************************************
checking whether to use FFTW... guess
checking for libfftw3... yes
checking for fftw3.h... yes
checking whether to use CUDA... guess
checking for nvcc... /usr/local/cuda/bin/nvcc
checking if /usr/local/cuda/bin/nvcc supports -c -o file.o... no
checking if /usr/local/cuda/bin/nvcc supports -c -o file.o... (cached) no
checking whether the /usr/local/cuda/bin/nvcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking how to hardcode library paths into programs... immediate
checking for libcudart... yes
checking for libcufft... yes
checking whether CUDA compiles... yes
checking whether CUDA runs... no
configure: WARNING: cannot run CUDA code. Some features will not be available!
****************************************************************
* Checking for Python *
****************************************************************
checking for a Python interpreter with version >= 2.5... python
checking for python... /usr/bin/python
checking for python version... 2.7
checking for python platform... linux2
checking for python script directory... ${prefix}/lib/python2.7/site-packages
checking for python extension module directory... ${exec_prefix}/lib/python2.7/site-packages
checking whether python -B works... yes
checking whether the python interface is wanted... guess
checking for python2.7... (cached) /usr/bin/python
checking for a version of Python >= '2.5'... yes
checking for python2.7-config... /usr/bin/python2.7-config
checking consistency of all components of python development environment... yes
checking for cython... no
checking python module: numpy... yes
checking for numpy include path... /usr/lib/python2.7/dist-packages/numpy/core/include
****************************************************************
* Checking for Tcl/Tk *
****************************************************************
checking whether to build the Tcl interface... yes
checking for libtcl8.6... yes
checking for tcl.h... yes
checking whether to use Tk... yes
****************************************************************
* Other settings *
****************************************************************
checking whether to use efence... no
checking whether the variable MYCONFIG is set... no
checking the number of available CPUs... 3
****************************************************************
* Creating output files *
****************************************************************
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config/Makefile
config.status: creating config/myconfig-sample-header.hpp
config.status: creating src/Makefile
config.status: creating src/core/Makefile
config.status: creating src/tcl/Makefile
config.status: creating src/python/espressomd/Makefile
config.status: creating tools/Makefile
config.status: creating scripts/Makefile
config.status: creating testsuite/Makefile
config.status: creating doc/Makefile
config.status: creating doc/logo/Makefile
config.status: creating doc/ug/Makefile
config.status: creating doc/dg/Makefile
config.status: creating doc/doxygen/Makefile
config.status: creating doc/tutorials/Makefile
config.status: creating doc/tutorials/01-lennard_jones/Makefile
config.status: creating doc/tutorials/02-charged_system/Makefile
config.status: creating doc/tutorials/03-object_in_fluid/Makefile
config.status: creating doc/latexit.sh
config.status: creating testsuite/runtest.sh
config.status: creating tools/es_mpiexec
config.status: creating src/python/pypresso
config.status: creating src/acconfig.hpp
config.status: src/acconfig.hpp is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing myconfig-sample.hpp commands
****************************************************************
* Configuration summary *
****************************************************************
platform detected = x86_64-unknown-linux-gnu
package version = 3.3.1
development sources = no
Compiler
--------
compiler = mpic++
linker = /usr/bin/ld -m elf_x86_64
c++ compiler flags = -Wall -O3
c++ preprocessor flags = -I/usr/share/ActiveTcl8.6.4.1.299124-linux-x86_64-threaded/payload/include
linker flags =
libraries = -ltcl8.6 -lfftw3 -lm
using debug flags =
using profiling flags =
Libraries
---------
FFTW = yes
efence = no
Tcl/Tk
------
Tcl version = tcl8.6
Tk version = none
Python
------
python = /usr/bin/python
build python interface = no
Other settings
--------------
config = myconfig.hpp
installation prefix = /home/antonina/Espresso
number of test tasks = 3
mympiexec = /home/antonina/espresso/espresso-3.3.1/mympiexec.sh
mpiexec = /usr/bin/mpiexec
pdflatex = /usr/bin/pdflatex
makeindex = /usr/bin/makeindex
bibtex = /usr/bin/bibtex
doxygen = /usr/bin/doxygen
dot = /usr/bin/dot
CUDA disabled or not supported.
я уже совсем замучилась.
можете подсказать?
Тема: проблема при установке ESPResSo (Прочитано 839 раз)
