Частоты радио в тюнере AverTV Hybrid+FM PCI A16D

[WKG]

Может кто-нибудь сталкивался с таким:
Тюнер работает, все ловит, но частоты не соответствуют:
например ретро фм ловится на 91.10МГц, а должно на 88.3МГц
NRJ на 107.0 вместо 104.2

явный сдвиг на 2.8МГц...

в связи с этим не могу поймать РСН, которая на 107.0 и у меня будет на 108.8...а в программах максимум 108.0 )

Может кто знает в чем может быть проблема...

[V@kruS]

Добрый день!У меня такой же тв-тюнер.Подскажи как его запустил и как настраивал.А то мучаюсь с ним неделю,не могу запустить.Tvtime запускается но ничего не видет,синий экран.Буду очень благодарен.

[WKG]

Прикрепляю файлик xc3028-v27.fw , его надо положить в /lib/firmware/ (если папки нет - создать)

Файлик создан из виндовых драйверов скриптом.

скрипт: http://linuxtv.org/hg/v4l-dvb/raw-file/3919b17dc88e/linux/Documentation/video4linux/extract_xc3028.pl
в папке с файлом hcw85bda.sys запускаем perl extract_xc3028.pl
и создается нужный xc3028-v27.fw

Но я прикреплю уже готовый, просто не уверен что он с разными ядрами заработает - тогда придется самому скриптом создавать.
виндовый hcw85bda.sys не прикрепляется, слишком большой, потом могу дать, если понадобится.

___

С этим файлом радио, tvtime и DVB-T работает сразу, за исключением звука в  радио и tvtime, они запускаются только костылем, впрочем как и во всех тюнерах без audio-out:
arecord -q -D hw:1,0 -r 32000 -c 2 -f S16_LE | aplay -q

[V@kruS]

Пока скопировал твой файл,но чет tvtime ведет себя также.Дай пожалуйста этот sys-файл может исправит ситуацию.
Вот на че ругается tvtime

(Нажмите, чтобы показать/скрыть)

Запуск tvtime 1.0.2.
Чтение конфигурации из /etc/tvtime/tvtime.xml
I/O warning : failed to load external entity "/home/aleksandr/.tvtime/tvtime.xml"
I/O error : Permission denied
I/O error : Permission denied
Не могу изменить владельца /home/aleksandr/.tvtime/tvtime.xml: Отказано в доступе.
mixer: Can't open device /dev/mixer, mixer volume and mute unavailable.
I/O error : Permission denied
I/O error : Permission denied

[WKG]

Пока скопировал твой файл,но чет tvtime ведет себя также.Дай пожалуйста этот sys-файл может исправит ситуацию.
Вот на че ругается tvtime

(Нажмите, чтобы показать/скрыть)

Запуск tvtime 1.0.2.
Чтение конфигурации из /etc/tvtime/tvtime.xml
I/O warning : failed to load external entity "/home/aleksandr/.tvtime/tvtime.xml"
I/O error : Permission denied
I/O error : Permission denied
Не могу изменить владельца /home/aleksandr/.tvtime/tvtime.xml: Отказано в доступе.
mixer: Can't open device /dev/mixer, mixer volume and mute unavailable.
I/O error : Permission denied
I/O error : Permission denied

Это в чем-то другом проблема... Почему у тебя файл /home/aleksandr/.tvtime/tvtime.xm недосутупен юзеру?

попробуй удалить настройки sudo эрэм эрэф /home/aleksandr/.tvtime/

само устройство есть? /dev/video0 ?

но файл вот:
http://wmd.su/hcw85bda.sys

[V@kruS]

Удалил настройки теперь вот так пишет и показывает синий экран

(Нажмите, чтобы показать/скрыть)

Запуск tvtime 1.0.2.
Чтение конфигурации из /etc/tvtime/tvtime.xml
Чтение конфигурации из /home/aleksandr/.tvtime/tvtime.xml
mixer: Can't open device /dev/mixer, mixer volume and mute unavailable.

/dev/video0 - вебкамера вроде как
тюнер идет как /dev/video1

[WKG]

Удалил настройки теперь вот так пишет и показывает синий экран

(Нажмите, чтобы показать/скрыть)

Запуск tvtime 1.0.2.
Чтение конфигурации из /etc/tvtime/tvtime.xml
Чтение конфигурации из /home/aleksandr/.tvtime/tvtime.xml
mixer: Can't open device /dev/mixer, mixer volume and mute unavailable.

/dev/video0 - вебкамера вроде как
тюнер идет как /dev/video1

А если отключить обнаружение сигнала? может быть просто плохо ловятся каналы...

[V@kruS]

запускал радио через gnomeradio,ругалось на mixer.
С костылем появилось характерное шипение но радиостанции не находит.
получается тюнер видят,только не могут им управлять?
Пользователь решил продолжить мысль 02 Марта 2011, 00:44:12:слабый сигнал это врядли,у меня кабельное.
отключаю обнаружение,тогда черный экран.остальное тоже самое.

[WKG]

запускал радио через gnomeradio,ругалось на mixer.
С костылем появилось характерное шипение но радиостанции не находит.
получается тюнер видят,только не могут им управлять?
Пользователь решил продолжить мысль 02 Марта 2011, 00:44:12:слабый сигнал это врядли,у меня кабельное.
отключаю обнаружение,тогда черный экран.остальное тоже самое.

все точно так же как у меня было без файла xc3028-v27.fw, может быть в убунте его надо куда то в другое место кинуть... посмотри что выводит dmesg после запуска tvtime...

[V@kruS]

Вот че вывел dmesg

(Нажмите, чтобы показать/скрыть)

[    0.308198] pci_bus 0000:02: resource 1 [mem 0xff700000-0xff7fffff]
[    0.308201] pci_bus 0000:02: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[    0.308205] pci_bus 0000:05: resource 0 [io  0xb000-0xbfff]
[    0.308208] pci_bus 0000:05: resource 1 [mem 0xff900000-0xff9fffff]
[    0.308211] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.308214] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.308217] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.308220] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[    0.308224] pci_bus 0000:05: resource 8 [mem 0x80000000-0xffffffff]
[    0.308272] NET: Registered protocol family 2
[    0.308368] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.308733] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.309312] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.309601] TCP: Hash tables configured (established 131072 bind 65536)
[    0.309603] TCP reno registered
[    0.309607] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.309620] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.309733] NET: Registered protocol family 1
[    0.309923] pci 0000:01:00.0: Boot video device
[    0.309952] PCI: CLS 32 bytes, default 64
[    0.310224] cpufreq-nforce2: No nForce2 chipset.
[    0.310273] Scanning for low memory corruption every 60 seconds
[    0.310433] audit: initializing netlink socket (disabled)
[    0.310446] type=2000 audit(1299058773.304:1): initialized
[    0.320676] highmem bounce pool size: 64 pages
[    0.320684] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.322882] VFS: Disk quotas dquot_6.5.2
[    0.322970] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.323876] fuse init (API version 7.14)
[    0.324021] msgmni has been set to 1668
[    0.707221] Freeing initrd memory: 17960k freed
[    0.719800] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.719805] io scheduler noop registered
[    0.719808] io scheduler deadline registered
[    0.719829] io scheduler cfq registered (default)
[    0.720033] pcieport 0000:00:01.0: setting latency timer to 64
[    0.720068]   alloc irq_desc for 40 on node -1
[    0.720072]   alloc kstat_irqs on node -1
[    0.720083] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.720172] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.720210]   alloc irq_desc for 41 on node -1
[    0.720213]   alloc kstat_irqs on node -1
[    0.720222] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.720337] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.720384]   alloc irq_desc for 42 on node -1
[    0.720387]   alloc kstat_irqs on node -1
[    0.720397] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[    0.720516] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.720554]   alloc irq_desc for 43 on node -1
[    0.720556]   alloc kstat_irqs on node -1
[    0.720565] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[    0.720721] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.720865] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.721179] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.721187] ACPI: Power Button [PWRB]
[    0.721255] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.721261] ACPI: Power Button [PWRF]
[    0.721650] ACPI: acpi_idle registered with cpuidle
[    0.726315] ERST: Table is not found!
[    0.726365] isapnp: Scanning for PnP cards...
[    0.726590] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.726709] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.727153] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.729093] brd: module loaded
[    0.729909] loop: module loaded
[    0.730177] ata_piix 0000:00:1f.2: version 2.13
[    0.730197] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.730203] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.884707] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.884784] scsi0 : ata_piix
[    0.884896] scsi1 : ata_piix
[    0.888271] ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 19
[    0.888278] ata2: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 19
[    0.888324] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.888330] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.888376] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.888428] scsi2 : ata_piix
[    0.888511] scsi3 : ata_piix
[    0.890549] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 19
[    0.890555] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 19
[    0.890631] pata_acpi 0000:02:00.1: enabling device (0000 -> 0001)
[    0.890639]   alloc irq_desc for 17 on node -1
[    0.890641]   alloc kstat_irqs on node -1
[    0.890649] pata_acpi 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.890683] pata_acpi 0000:02:00.1: setting latency timer to 64
[    0.890700] pata_acpi 0000:02:00.1: PCI INT B disabled
[    0.891252] Fixed MDIO Bus: probed
[    0.891311] PPP generic driver version 2.4.2
[    0.891379] tun: Universal TUN/TAP device driver, 1.6
[    0.891382] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.891501] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.891523]   alloc irq_desc for 18 on node -1
[    0.891526]   alloc kstat_irqs on node -1
[    0.891532] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.891547] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.891552] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.891603] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.891637] ehci_hcd 0000:00:1a.7: debug port 1
[    0.895527] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.895547] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xffaffc00
[    0.908712] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.908882] hub 1-0:1.0: USB hub found
[    0.908889] hub 1-0:1.0: 4 ports detected
[    0.909000]   alloc irq_desc for 23 on node -1
[    0.909003]   alloc kstat_irqs on node -1
[    0.909010] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.909024] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.909029] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.909084] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.909116] ehci_hcd 0000:00:1d.7: debug port 1
[    0.913017] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.913036] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffaff800
[    0.928734] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.928894] hub 2-0:1.0: USB hub found
[    0.928901] hub 2-0:1.0: 6 ports detected
[    0.929019] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.929043] uhci_hcd: USB Universal Host Controller Interface driver
[    0.929071] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.929079] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.929084] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.929132] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.929169] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000dc00
[    0.929338] hub 3-0:1.0: USB hub found
[    0.929344] hub 3-0:1.0: 2 ports detected
[    0.929440] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.929449] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.929453] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.929501] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.929538] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000e000
[    0.929725] hub 4-0:1.0: USB hub found
[    0.929731] hub 4-0:1.0: 2 ports detected
[    0.929828] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.929836] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.929841] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.929887] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.929914] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d480
[    0.930078] hub 5-0:1.0: USB hub found
[    0.930084] hub 5-0:1.0: 2 ports detected
[    0.930178] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.930187] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.930192] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.930239] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.930266] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
[    0.930434] hub 6-0:1.0: USB hub found
[    0.930441] hub 6-0:1.0: 2 ports detected
[    0.930533] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.930542] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.930547] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.930597] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.930623] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d880
[    0.930791] hub 7-0:1.0: USB hub found
[    0.930797] hub 7-0:1.0: 2 ports detected
[    0.931007] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.933848] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.933856] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.934019] mice: PS/2 mouse device common for all mice
[    0.934193] rtc_cmos 00:03: RTC can wake from S4
[    0.934251] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.934278] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.934436] device-mapper: uevent: version 1.0.3
[    0.934591] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[    0.934685] device-mapper: multipath: version 1.1.1 loaded
[    0.934689] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.934850] EISA: Probing bus 0 at eisa.0
[    0.934855] EISA: Cannot allocate resource for mainboard
[    0.934860] Cannot allocate resource for EISA slot 1
[    0.934863] Cannot allocate resource for EISA slot 2
[    0.934866] Cannot allocate resource for EISA slot 3
[    0.934869] Cannot allocate resource for EISA slot 4
[    0.934873] Cannot allocate resource for EISA slot 5
[    0.934876] Cannot allocate resource for EISA slot 6
[    0.934879] Cannot allocate resource for EISA slot 7
[    0.934882] Cannot allocate resource for EISA slot 8
[    0.934885] EISA: Detected 0 cards.
[    0.934977] cpuidle: using governor ladder
[    0.934980] cpuidle: using governor menu
[    0.935423] TCP cubic registered
[    0.935620] NET: Registered protocol family 10
[    0.936164] lo: Disabled Privacy Extensions
[    0.936519] NET: Registered protocol family 17
[    0.937221] Using IPI No-Shortcut mode
[    0.937346] PM: Resume from disk failed.
[    0.937361] registered taskstats version 1
[    0.937787]   Magic number: 3:216:676
[    0.937860] rtc_cmos 00:03: setting system clock to 2011-03-02 09:39:34 UTC (1299058774)
[    0.937864] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.937867] EDD information not available.
[    0.958212] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.079498] isapnp: No Plug & Play device found
[    1.226748] ata4: SATA link down (SStatus 0 SControl 300)
[    1.237490] ata3: SATA link down (SStatus 0 SControl 300)
[    1.632020] usb 6-1: new full speed USB device using uhci_hcd and address 2
[    1.692080] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.692095] ata1.01: SATA link down (SStatus 4 SControl 300)
[    1.700278] ata1.00: ATA-7: SAMSUNG HD080HJ, WT100-41, max UDMA7
[    1.700283] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.708080] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.708095] ata2.01: SATA link down (SStatus 4 SControl 300)
[    1.716266] ata2.00: ATA-7: SAMSUNG SP2504C, VT100-50, max UDMA7
[    1.716272] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.740351] ata1.00: configured for UDMA/133
[    1.740498] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD080HJ  WT10 PQ: 0 ANSI: 5
[    1.740705] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.740719] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.740822] sd 0:0:0:0: [sda] Write Protect is off
[    1.740826] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.740861] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.741139]  sda: sda1 sda2 <
[    1.756292] ata2.00: configured for UDMA/133
[    1.756406] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
[    1.756592] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.756599] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.756722] sd 1:0:0:0: [sdb] Write Protect is off
[    1.756727] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.756764] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.756997]  sdb: sdb2 < sda5 sdb5 >
[    1.770922] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.777183]  sda6 >
[    1.777603] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.777645] Freeing unused kernel memory: 688k freed
[    1.778072] Write protecting the kernel text: 4936k
[    1.778130] Write protecting the kernel read-only data: 1980k
[    1.805103] ramzswap: module is from the staging directory, the quality is unknown, you have been warned.
[    1.806207] ramzswap: num_devices not specified. Using default: 1
[    1.806210] ramzswap: Creating 1 devices ...
[    1.812884] udev[90]: starting version 163
[    1.974004] pata_jmicron 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.974050] pata_jmicron 0000:02:00.1: setting latency timer to 64
[    1.991744] Linux agpgart interface v0.103
[    2.002018] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.002046] r8169 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.002096] r8169 0000:03:00.0: setting latency timer to 64
[    2.002159]   alloc irq_desc for 44 on node -1
[    2.002162]   alloc kstat_irqs on node -1
[    2.002179] r8169 0000:03:00.0: irq 44 for MSI/MSI-X
[    2.002943] r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xf81ca000, 00:18:f3:0b:84:5e, XID 18000000 IRQ 44
[    2.027275] scsi4 : pata_jmicron
[    2.028917] Floppy drive(s): fd0 is 1.44M
[    2.036288] usb 6-2: new low speed USB device using uhci_hcd and address 3
[    2.047105] scsi5 : pata_jmicron
[    2.048392] ata5: PATA max UDMA/100 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 17
[    2.048397] ata6: PATA max UDMA/100 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 17
[    2.055685] ahci 0000:02:00.0: version 3.0
[    2.055713] ahci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.066587] FDC 0 is a post-1991 82077
[    2.067178] [drm] Initialized drm 1.1.0 20060810
[    2.068610] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    2.068618] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[    2.068631] ahci 0000:02:00.0: setting latency timer to 64
[    2.068912] scsi6 : ahci
[    2.069101] scsi7 : ahci
[    2.069264] ata7: SATA max UDMA/133 abar m8192@0xff7fe000 port 0xff7fe100 irq 16
[    2.069271] ata8: SATA max UDMA/133 abar m8192@0xff7fe000 port 0xff7fe180 irq 16
[    2.217074] ata5.00: ATAPI: Optiarc DVD RW AD-5170A, 1.14, max UDMA/66
[    2.233095] ata5.00: configured for UDMA/66
[    2.234997] scsi 4:0:0:0: CD-ROM            Optiarc  DVD RW AD-5170A  1.14 PQ: 0 ANSI: 5
[    2.237763] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    2.237769] Uniform CD-ROM driver Revision: 3.20
[    2.237923] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    2.238016] sr 4:0:0:0: Attached scsi generic sg2 type 5
[    2.388037] ata8: SATA link down (SStatus 0 SControl 300)
[    2.388075] ata7: SATA link down (SStatus 0 SControl 300)
[    2.416368] usbcore: registered new interface driver hiddev
[    2.416390] usbhid 6-2:1.0: couldn't find an input interrupt endpoint
[    2.416598] usbcore: registered new interface driver usbhid
[    2.416601] usbhid: USB HID core driver
[    2.421639] firewire_ohci 0000:05:02.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.466679] [drm] radeon defaulting to kernel modesetting.
[    2.466684] [drm] radeon kernel modesetting enabled.
[    2.466750] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.466757] radeon 0000:01:00.0: setting latency timer to 64
[    2.468581] [drm] initializing kernel modesetting (RV570 0x1002:0x7280).
[    2.468730] [drm] register mmio base: 0xFF6F0000
[    2.468734] [drm] register mmio size: 65536
[    2.471163] ATOM BIOS: 113
[    2.471194] [drm] Generation 2 PCI interface, using max accessible memory
[    2.471200] radeon 0000:01:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
[    2.471204] radeon 0000:01:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
[    2.471289]   alloc irq_desc for 45 on node -1
[    2.471292]   alloc kstat_irqs on node -1
[    2.471306] radeon 0000:01:00.0: irq 45 for MSI/MSI-X
[    2.471313] radeon 0000:01:00.0: radeon: using MSI.
[    2.471339] [drm] radeon: irq initialized.
[    2.472160] [drm] Detected VRAM RAM=256M, BAR=256M
[    2.472165] [drm] RAM width 256bits DDR
[    2.472274] [TTM] Zone  kernel: Available graphics memory: 436484 kiB.
[    2.472279] [TTM] Zone highmem: Available graphics memory: 1030184 kiB.
[    2.472282] [TTM] Initializing pool allocator.
[    2.472310] [drm] radeon: 256M of VRAM memory ready
[    2.472314] [drm] radeon: 512M of GTT memory ready.
[    2.472351] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    2.473956] [drm] radeon: 3 quad pipes, 1 z pipes initialized.
[    2.475546] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[    2.475778] [drm] Loading R500 Microcode
[    2.477852] [drm] radeon: ring at 0x0000000010000000
[    2.477876] [drm] ring test succeeded in 2 usecs
[    2.478121] [drm] radeon: ib pool ready.
[    2.478226] [drm] ib test succeeded in 0 usecs
[    2.478237] failed to evaluate ATIF got AE_BAD_PARAMETER
[    2.478240] radeon 0000:01:00.0: Error during ACPI methods call
[    2.478286] [drm] Default TV standard: PAL
[    2.478291] [drm] Default TV standard: PAL
[    2.478364] Radeon i2c bit bus DVI: Test OK
[    2.478629] [drm] Default TV standard: PAL
[    2.478737] Radeon i2c bit bus DVI: Test OK
[    2.478815] [drm] Radeon Display Connectors
[    2.478819] [drm] Connector 0:
[    2.478821] [drm]   DVI-I
[    2.478823] [drm]   HPD2
[    2.478826] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[    2.478829] [drm]   Encoders:
[    2.478831] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.478833] [drm]     DFP3: INTERNAL_LVTM1
[    2.478836] [drm] Connector 1:
[    2.478838] [drm]   S-video
[    2.478840] [drm]   Encoders:
[    2.478842] [drm]     TV1: INTERNAL_KLDSCP_DAC2
[    2.478844] [drm] Connector 2:
[    2.478846] [drm]   DVI-I
[    2.478848] [drm]   HPD1
[    2.478851] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[    2.478853] [drm]   Encoders:
[    2.478855] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    2.478858] [drm]     DFP1: INTERNAL_KLDSCP_TMDS1
[    2.516517] firewire_ohci: Added fw-ohci device 0000:05:02.0, OHCI v1.0, 4 IR + 8 IT contexts, quirks 0x1
[    2.533839] [drm] Possible lm64 thermal controller at 0x4c
[    2.533904] Radeon i2c bit bus Thermal: Test OK
[    2.631397] [drm] fb mappable at 0xC00C0000
[    2.631400] [drm] vram apper at 0xC0000000
[    2.631403] [drm] size 8294400
[    2.631405] [drm] fb depth is 24
[    2.631407] [drm]    pitch is 7680
[    2.647938] Console: switching to colour frame buffer device 240x67
[    2.655547] fb0: radeondrmfb frame buffer device
[    2.655550] drm: registered panic notifier
[    2.655554] Slow work thread pool: Starting up
[    2.655640] Slow work thread pool: Ready
[    2.655648] [drm] Initialized radeon 2.5.0 20080528 for 0000:01:00.0 on minor 0
[    3.008166] firewire_core: created device fw0: GUID 000a480000000f39, S400
[    5.334220] xor: automatically using best checksumming function: pIII_sse
[    5.352504]    pIII_sse  :  4503.000 MB/sec
[    5.352508] xor: using function: pIII_sse (4503.000 MB/sec)
[    5.356277] device-mapper: dm-raid45: initialized v0.2594b
[    5.508326] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   12.322974] udev[455]: starting version 163
[   12.394782] Adding 3997692k swap on /dev/sda6.  Priority:-1 extents:1 across:3997692k
[   12.399991] lp: driver loaded but no devices found
[   12.687701] Linux video capture interface: v2.00
[   12.717845] gspca: main v2.9.0 registered
[   12.719280] gspca: probing 0c45:613e
[   12.760238] sonixj: Sonix chip id: 12
[   12.784811] IR NEC protocol handler initialized
[   12.807727] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   12.815152] sonixj: Sensor ov7631
[   12.817276] input: sonixj as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/input/input3
[   12.817402] gspca: video0 created
[   12.817407] gspca: found int in endpoint: 0x83, buffer_len=1, interval=100
[   12.817447] usbcore: registered new interface driver sonixj
[   12.817451] sonixj: registered
[   12.843386] IR RC5(x) protocol handler initialized
[   12.844384] parport_pc 00:0b: reported by Plug and Play ACPI
[   12.844492] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   12.873871] psmouse serio1: ID: 10 00 64
[   12.887353] IR RC6 protocol handler initialized
[   12.898329] saa7130/34: v4l2 driver version 0.2.16 loaded
[   12.898394]   alloc irq_desc for 22 on node -1
[   12.898397]   alloc kstat_irqs on node -1
[   12.898406] saa7134 0000:05:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   12.898415] saa7133[0]: found at 0000:05:01.0, rev: 209, irq: 22, latency: 64, mmio: 0xff9ff800
[   12.898423] saa7133[0]: subsystem: 1461:f936, board: AVerMedia Hybrid TV/Radio (A16D) [card=137,insmod option]
[   12.898478] saa7133[0]: board init: gpio is 2bc00
[   12.911651] ppdev: user-space parallel port driver
[   12.929882] IR JVC protocol handler initialized
[   12.940734] lp0: using parport0 (interrupt-driven).
[   12.955243] IR Sony protocol handler initialized
[   12.961134] type=1400 audit(1299040786.519:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=748 comm="apparmor_parser"
[   12.961871] type=1400 audit(1299040786.519:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=748 comm="apparmor_parser"
[   12.962278] type=1400 audit(1299040786.519:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=748 comm="apparmor_parser"
[   12.964282] type=1400 audit(1299040786.519:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=747 comm="apparmor_parser"
[   12.965055] type=1400 audit(1299040786.523:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=747 comm="apparmor_parser"
[   12.965462] type=1400 audit(1299040786.523:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=747 comm="apparmor_parser"
[   12.978438] type=1400 audit(1299040786.535:: apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=769 comm="apparmor_parser"
[   12.979118] type=1400 audit(1299040786.535:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=768 comm="apparmor_parser"
[   12.996530] Registered IR keymap rc-avermedia-a16d
[   12.996838] input: saa7134 IR (AVerMedia Hybrid TV as /devices/pci0000:00/0000:00:1e.0/0000:05:01.0/rc/rc0/input4
[   12.996925] rc0: saa7134 IR (AVerMedia Hybrid TV as /devices/pci0000:00/0000:00:1e.0/0000:05:01.0/rc/rc0
[   12.998050] lirc_dev: IR Remote Control driver registered, major 249
[   13.000613] IR LIRC bridge handler initialized
[   13.121234] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   13.121291]   alloc irq_desc for 46 on node -1
[   13.121295]   alloc kstat_irqs on node -1
[   13.121309] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[   13.121342] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   13.148685] saa7133[0]: i2c eeprom 00: 61 14 36 f9 00 00 00 00 00 00 00 00 00 00 00 00
[   13.148702] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
[   13.148719] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 00 08 ff 00 0e ff ff ff ff
[   13.148735] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.148751] saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff
[   13.148766] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.148781] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.148797] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.148812] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.148827] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.148842] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.148858] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.148873] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.148888] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.148903] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.148919] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.156569] saa7133[0]: i2c scan: found device @ 0x1e  []
[   13.180656] saa7133[0]: i2c scan: found device @ 0xa0  [eeprom]
[   13.188699] saa7133[0]: i2c scan: found device @ 0xc2  []
[   13.202950] tuner: Unknown parameter `port2'
[   13.222454] saa7133[0]: registered device video1 [v4l2]
[   13.222501] saa7133[0]: registered device vbi0
[   13.222547] saa7133[0]: registered device radio1
[   13.248519] saa7134 ALSA driver for DMA sound loaded
[   13.248563] saa7133[0]/alsa: saa7133[0] at 0xff9ff800 irq 22 registered as card -2
[   13.258113] tuner: Unknown parameter `port2'
[   13.374158] type=1400 audit(1299040786.931:10): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=977 comm="apparmor_parser"
[   13.386799] type=1400 audit(1299040786.943:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=978 comm="apparmor_parser"
[   13.420968] r8169 0000:03:00.0: eth0: link up
[   13.420978] r8169 0000:03:00.0: eth0: link up
[   13.473251] dvb_init() allocating 1 frontend
[   13.514716] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[   13.652552] xc2028 3-0061: creating new instance
[   13.652558] xc2028 3-0061: type set to XCeive xc2028/xc3028 tuner
[   13.652562] DVB: registering new adapter (saa7133[0])
[   13.652568] DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)...
[   17.336184] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[   20.324543] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[   24.400009] eth0: no IPv6 routers present
[   88.256049] PPP Deflate Compression module registered

[WKG]

у меня идеи кончились, должно вроде работать...

[V@kruS]

Ура!!!получилось!!!Мешались файлы которые до этого создавал в папке modprobe.b для тюнера.Удалил их и УРА картинка появилась.
СПАСИБО ОГРОМНОЕ за помощь!Теперь можно смело переходить на Linux.
Буду теперь пробовать радио.
Пользователь решил продолжить мысль 02 Марта 2011, 12:32:57:А можно как-то автоматизировать запуск tvtime и костыля для звука?

[WKG]

Ура!!!получилось!!!Мешались файлы которые до этого создавал в папке modprobe.b для тюнера.Удалил их и УРА картинка появилась.
СПАСИБО ОГРОМНОЕ за помощь!Теперь можно смело переходить на Linux.
Буду теперь пробовать радио.
Пользователь решил продолжить мысль 02 Марта 2011, 12:32:57:А можно как-то автоматизировать запуск tvtime и костыля для звука?

да, в параметрах к модулю для этого тюнера ничего не нужно
Пользователь решил продолжить мысль 02 Марта 2011, 12:37:06:

А можно как-то автоматизировать запуск tvtime и костыля для звука?

Можно, я создал бинарник такого вида:
((arecord -q -D hw:1,0 -r 32000 -c 2 -f S16_LE | aplay -q - &)&&tvtime)&&killall -9 aplay&&killall -9 arecord

пишешь это, например в /usr/bin/tv
делаешь chmod +x /usr/bin/tv

и потом запускаешь телек по коменде tv

Пользователь решил продолжить мысль 02 Марта 2011, 12:38:46:Но у меня через время звук начинал отставать, приходилось все перезапускать..., как это решить не придумал...

[hokum13]

НАРОД СПАСИБО

2 недели бился с настройкой вот этой карты:   

PV-A883SPN(FRT)-F (pixelview playtv pro 4).

кто бы мог подумать что решение для совершенно другого железа (xceive 2028 vs xceive 3018)(cx23880 vs saa7135) этот рецепт заработает (ну уже совершенно от безысходности попробовал).