Та же проблема.
Пробовал acpi=force и acpi=off в грабе, Shutdown -P, отключать какие-то модули по совету, пробовал ядро 3.19
На предыдущей убунте тоже самое было.
ubuntu 14.04 64 bits, мать Асус с EFI
Что-то в этом ЕFI, может быть?
Там кстати нет вообще управление режимами S0 и т.д. как в обычных биосах.
Много ошибок "ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver" в выводе:
dmesg | grep ACPI
[ 0.000000] BIOS-e820: [mem 0x000000009e93b000-0x000000009eb82fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009eb83000-0x000000009eb8ffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009eb90000-0x000000009ebbafff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009ebbb000-0x000000009ebbffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009ebc0000-0x000000009ec02fff] ACPI NVS
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000009EB83078 000064 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000009EB8DB10 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000009EB83170 00A9A0 (v02 ALASKA A M I 00000015 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000009EBB9F80 000040
[ 0.000000] ACPI: APIC 0x000000009EB8DC08 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000009EB8DC80 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x000000009EB8DCC0 00048F (v01 Intel_ AoacTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: HPET 0x000000009EB8E150 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x000000009EB8E188 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x000000009EB8E4F8 000926 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x000000009EB8EE20 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000036] ACPI: Core revision 20141107
[ 0.006311] ACPI: All ACPI Tables successfully acquired
[ 0.124526] PM: Registering ACPI NVS region [mem 0x9e93b000-0x9eb82fff] (2392064 bytes)
[ 0.124552] PM: Registering ACPI NVS region [mem 0x9eb90000-0x9ebbafff] (176128 bytes)
[ 0.124556] PM: Registering ACPI NVS region [mem 0x9ebc0000-0x9ec02fff] (274432 bytes)
[ 0.136428] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.136430] ACPI: bus type PCI registered
[ 0.136431] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.144699] ACPI: Added _OSI(Module Device)
[ 0.144701] ACPI: Added _OSI(Processor Device)
[ 0.144702] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.144703] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.147056] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.149143] ACPI: Dynamic OEM Table Load:
[ 0.149149] ACPI: SSDT 0xFFFF8801F6B56000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.149591] ACPI: Dynamic OEM Table Load:
[ 0.149595] ACPI: SSDT 0xFFFF8801F653C000 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.149976] ACPI: Dynamic OEM Table Load:
[ 0.149979] ACPI: SSDT 0xFFFF8801F64D2C00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.150710] ACPI: Interpreter enabled
[ 0.150718] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.150729] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.150730] ACPI: Using IOAPIC for interrupt routing
[ 0.150751] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.155374] ACPI: Power Resource [FN00] (off)
[ 0.155442] ACPI: Power Resource [FN01] (off)
[ 0.155510] ACPI: Power Resource [FN02] (off)
[ 0.155576] ACPI: Power Resource [FN03] (off)
[ 0.155641] ACPI: Power Resource [FN04] (off)
[ 0.156135] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.156924] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.157383] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.157533] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.157681] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.157830] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.157977] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.158166] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.159016] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.168644] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.176538] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.177241] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 10 *11 12 14 15)
[ 0.177282] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 10 11 12 14 15) *0, disabled.
[ 0.177323] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
[ 0.177359] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 10 11 12 14 *15)
[ 0.177396] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 10 11 12 14 15) *0, disabled.
[ 0.177434] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *10 11 12 14 15)
[ 0.177471] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 10 11 12 14 15) *0, disabled.
[ 0.177508] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 10 11 12 14 15)
[ 0.177735] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.178069] ACPI: bus type USB registered
[ 0.178207] PCI: Using ACPI for IRQ routing
[ 0.186459] pnp: PnP ACPI init
[ 0.186543] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.186620] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.186647] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.186688] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.186756] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.186874] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187144] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187267] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.187285] pnp: PnP ACPI: found 8 devices
[ 0.960934] ACPI: Power Button [PWRB]
[ 0.960971] ACPI: Power Button [PWRF]
[ 0.961597] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.961776] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.010057] ACPI PCC probe failed.
[ 1.399729] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[ 1.399734] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff8801f78b5f00), AE_NOT_FOUND (20141107/psparse-536)
[ 1.401938] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[ 1.401947] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff8801f78b5f00), AE_NOT_FOUND (20141107/psparse-536)
[ 13.506793] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20141107/utaddress-258)
[ 13.506798] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.506801] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
[ 13.506803] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPCB.GPBX) (20141107/utaddress-258)
[ 13.506806] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.506807] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
[ 13.506809] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPCB.GPBX) (20141107/utaddress-258)
[ 13.506811] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.506812] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
[ 13.506814] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPCB.GPBX) (20141107/utaddress-258)
[ 13.506816] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000050f (\_GPE.GPIO) (20141107/utaddress-258)
[ 13.506819] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.984564] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 14.463573] asus_wmi: Disabling ACPI video driver