ошибки k3b и brasero

[jericho]

Нафиг лыжу, пусть холодильники делают. Lite-on пишет все и скорость записи показывается правильно.

[Renaissance]

Кстати, только у меня после последней обновы Brasero начал исправно выплевывать диски после записи?

[us5qvh]

Кстати, только у меня после последней обновы Brasero начал исправно выплевывать диски после записи?

Нет, у меня по прежнему пишет "Извлеките диск вручную". Зато после недавнего обновления, если поставить галочку "Писать прямо на диск без создания образа", growisofs почти на 100% грузит процессор, аж привод снижает скорость записи.

[Den57]

Если у вас не пишет или не стирает диски(запарывает и реанимировать можно только в винде) brasero, надо добавить пользователя в группу optical, brasero сразу начинает и писать и стирать нормально, сам промучился больше полгода.

[Landgraf_Chel]

KUbuntu 10.04.
k3b при попытке записать диск выдаёт:

"cdrecord не имеет прав на открытие устройства
Использовать K3BSetup для разрешения проблемы"

Журнал ошибок прилагаю:

(Нажмите, чтобы показать/скрыть)

Devices
-----------------------
Optiarc DVD RW AD-5240S 1.03 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, Последовательный DVD-R, Двухслойный последовательный DVD-R, DVD-R Dual Layer Jump, DVD-RW с ограниченной перезаписью, Последовательный DVD-RW, DVD+RW, DVD+R, Двухслойный DVD+R, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Ограниченная перезапись, Layer Jump] [%7]

K3b::IsoImager
-----------------------
mkisofs print size result: 2298578 (4707487744 bytes)

System
-----------------------
K3b Version: 1.91.0
KDE Version: 4.4.2 (KDE 4.4.2)
QT Version:  4.6.2
Kernel:      2.6.32-24-generic

Used versions
-----------------------
mkisofs: 1.1.10
cdrecord: 1.1.10

cdrecord
-----------------------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'Optiarc '
Identification : 'DVD RW AD-5240S '
Revision       : '1.03'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0011 (DVD-R sequential recording)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording) (current)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags   : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1802240 = 1760 KB
FIFO size      : 12582912 = 12288 KB
/usr/bin/wodim: WARNING: Data may not fit on current disk.
/usr/bin/wodim: Notice: Most recorders cannot write CD's >= 90 minutes.
/usr/bin/wodim: Notice: Use -ignsize option to allow >= 90 minutes.
/usr/bin/wodim: Notice: Use -overburn option to write more than the official disk capacity.
/usr/bin/wodim: Notice: Most CD-writers do overburning only on SAO or RAW mode.
Track 01: data  4489 MB        
Total size:     5155 MB (510:47.70) = 2298578 sectors
Lout start:     5156 MB (510:49/53) = 2298578 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: -82

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=8 -sao driveropts=burnfree -data -tsize=2298578s -

mkisofs
-----------------------
2298578
I: -input-charset not specified, using utf-8 (detected in locale settings)

mkisofs calculate size command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid Egypt -volset  -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK -publisher  -preparer  -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /home/andrey/.kde/tmp-landgraf/k3bwE2600.tmp -rational-rock -hide-list /home/andrey/.kde/tmp-landgraf/k3bLe2600.tmp -joliet -joliet-long -hide-joliet-list /home/andrey/.kde/tmp-landgraf/k3bpd2600.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /home/andrey/.kde/tmp-landgraf/k3bWE2600.tmp

mkisofs command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -volid Egypt -volset  -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK -publisher  -preparer  -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /home/andrey/.kde/tmp-landgraf/k3bfa2600.tmp -rational-rock -hide-list /home/andrey/.kde/tmp-landgraf/k3bvh2600.tmp -joliet -joliet-long -hide-joliet-list /home/andrey/.kde/tmp-landgraf/k3beL2600.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /home/andrey/.kde/tmp-landgraf/k3btw2600.tmp

Запускаю K3BSetup - предлагает сменить права у привода /dev/sr0 с 660 root.cdrom на 666 root.cdrom
У программ: cdrdao 1.2.2 - c 0755 root.root на 4711 root.root
cdrecord 1.1.10 - c 0755 root.root на 4711 root.root

При этом программой growisows 7.1 c правами 0755 root.root вполне доволен.

Соглашаюсь, меняю - появляется "Ошибка 255" с предложением обратиться к разработчику.

P.S. С мая всё работало замечательно, возможно после очередного обновления что-то не так пофиксили...

Пришёл октябрь, обновился до 10.10 - проблемы ушли.

[V_oron]

Сегодня решил у себя эту параблему. Беда в неправильных правах доступа, что проставляются udev`ом на устройства:
Необходимо отредактировать файл /lib/udev/rules.d/75-cd-aliases-generator.rules, добавив выделенное жирным:

ACTION=="add", SUBSYSTEM=="block", ENV{ID_CDROM}=="?*", ENV{GENERATED}!="?*", PROGRAM="write_cd_rules", SYMLINK+="%c", MODE="0666"

Аналогичные правки внести в /etc/udev/rules.d/70-persistent-cd.rules.

Не могу понять почему, но установленная группа cdrom и права 0660 на /dev/cdrom не обеспечивают возможности нормальной записи. Видимо, программы-"писалки" пытаются работать от имени пользоватлетя, не состоящего в группе cdrom.

Еще, возможно, при использовании k3b следует после установки носителя в привод и его авто-монтирования Гномом, выполнить в консоли umount /dev/cdrom, а уже после производить запись.

З.Ы.: Очень странно, что на форумах нет этого решения. Неужели люди действительно потянулись на Arch?...

[V_REDFOX]

На днях  установил я более позднюю версию (2.0.1) k3b с надеждой избавится от глюков, но увы, столкнулся с ещё одним, программа перестала видеть  пакет cdrecord.  в менеджере пакетов найти cdrecord не удалось, установка старой версии k3b не помогла, в чём может быть проблема?

[us5qvh]

Сегодня впервые пытался записать в Brasero двухслойный диск. Вдруг на середине процесса - "Неизвестная ошибка". Лог прилагается:

(Нажмите, чтобы показать/скрыть)

Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1741)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_set_output_size_for_current_track
BraseroBurnURI stopping
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_session_output_size
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_current_track
BraseroBurnURI no burn:// URI found
BraseroBurnURI stopping
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_set_output_size_for_current_track
BraseroLocalTrack stopping
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_get_session_output_size
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_get_current_track
BraseroLocalTrack no remote URIs
BraseroLocalTrack stopping
BraseroChecksumFiles called brasero_job_get_output_type
BraseroChecksumFiles called brasero_job_get_current_track
BraseroChecksumFiles called brasero_job_get_action
BraseroChecksumFiles called brasero_job_get_action
BraseroChecksumFiles called brasero_job_set_output_size_for_current_track
BraseroChecksumFiles stopping
BraseroChecksumFiles called brasero_job_get_output_type
BraseroChecksumFiles called brasero_job_get_current_track
BraseroChecksumFiles called brasero_job_get_action
BraseroChecksumFiles called brasero_job_get_session_output_size
BraseroChecksumFiles called brasero_job_get_action
BraseroChecksumFiles called brasero_job_get_action
BraseroChecksumFiles called brasero_job_get_current_track
BraseroChecksumFiles called brasero_job_get_current_track
BraseroChecksumFiles called brasero_job_set_current_action
BraseroChecksumFiles called brasero_job_get_flags
BraseroChecksumFiles called brasero_job_get_action
BraseroChecksumFiles called brasero_job_get_current_track
BraseroChecksumFiles Adding graft for checksum file /.checksum.md5 file:///tmp/brasero_tmp_4NODLV.md5
BraseroChecksumFiles called brasero_job_add_track
BraseroChecksumFiles called brasero_job_get_action
BraseroChecksumFiles Finished track successfully
BraseroChecksumFiles stopping
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage getting varg
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage called brasero_job_get_current_track
BraseroGenisoimage called brasero_job_get_tmp_dir
BraseroGenisoimage called brasero_job_get_tmp_dir
BraseroGenisoimage called brasero_job_get_data_label
BraseroGenisoimage called brasero_job_get_flags
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage called brasero_job_set_current_action
BraseroGenisoimage got varg:
   /usr/bin/genisoimage
   -input-charset
   utf8
   -r
   -J
   -dvd-video
   -graft-points
   -path-list
   /tmp/brasero_tmp_P6LYKV
   -exclude-list
   /tmp/brasero_tmp_I8LYKV
   -V
   Chingishan1
   -A
   Brasero-2.30.2
   -sysid
   LINUX
   -quiet
   -print-size
   -f
   /tmp/brasero_tmp_iXzeAi
BraseroGenisoimage Launching command
BraseroGenisoimage called brasero_job_get_fd_out
BraseroGenisoimage called brasero_job_get_fd_in
BraseroGenisoimage called brasero_job_get_fd_out
BraseroGenisoimage stderr: Warning: Disabling Joliet support for DVD-Video.
BraseroGenisoimage stdout: 4110387
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage called brasero_job_set_output_size_for_current_track
BraseroGenisoimage stdout: HUP
BraseroGenisoimage stderr: HUP
BraseroGenisoimage process finished with status 0
BraseroGenisoimage Finished track successfully
BraseroGenisoimage called brasero_job_get_done_tracks
BraseroGenisoimage called brasero_job_get_fd_out
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage stopping
BraseroGenisoimage called brasero_job_get_done_tracks
BraseroGenisoimage called brasero_job_get_fd_out
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage called brasero_job_get_session_output_size
BraseroGenisoimage output set (IMAGE) image = /tmp/brasero_tmp_X66DLV.bin toc = none
BraseroGenisoimage called brasero_job_get_session_output_size
BraseroGenisoimage getting varg
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage called brasero_job_get_current_track
BraseroGenisoimage called brasero_job_get_tmp_dir
BraseroGenisoimage called brasero_job_get_tmp_dir
BraseroGenisoimage called brasero_job_get_data_label
BraseroGenisoimage called brasero_job_get_flags
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage called brasero_job_get_fd_out
BraseroGenisoimage called brasero_job_get_image_output
BraseroGenisoimage called brasero_job_set_current_action
BraseroGenisoimage got varg:
   /usr/bin/genisoimage
   -input-charset
   utf8
   -r
   -J
   -dvd-video
   -graft-points
   -path-list
   /tmp/brasero_tmp_SO7DLV
   -exclude-list
   /tmp/brasero_tmp_7P7DLV
   -V
   Chingishan1
   -A
   Brasero-2.30.2
   -sysid
   LINUX
   -o
   /tmp/brasero_tmp_X66DLV.bin
   -f
   /tmp/brasero_tmp_akWaX1
BraseroGenisoimage Launching command
BraseroGenisoimage called brasero_job_get_fd_out
BraseroGenisoimage called brasero_job_get_fd_in
BraseroGenisoimage called brasero_job_get_fd_out
BraseroGenisoimage stderr: Warning: Disabling Joliet support for DVD-Video.
BraseroGenisoimage stderr: Warning: -follow-links does not always work correctly; be careful.
BraseroGenisoimage stderr: The pad was 16 for file VIDEO_TS.IFO
BraseroGenisoimage stderr:   0.12% done, estimate finish Sat Oct 23 18:15:47 2010
BraseroGenisoimage stderr:   0.24% done, estimate finish Sat Oct 23 18:15:47 2010
BraseroGenisoimage stderr:   0.37% done, estimate finish Sat Oct 23 18:15:47 2010


BraseroGenisoimage stderr:  99.75% done, estimate finish Sat Oct 23 18:21:57 2010
BraseroGenisoimage stderr:  99.87% done, estimate finish Sat Oct 23 18:21:57 2010
BraseroGenisoimage stderr:  99.99% done, estimate finish Sat Oct 23 18:21:58 2010
BraseroGenisoimage stderr: Total translation table size: 0
BraseroGenisoimage stdout: HUP
BraseroGenisoimage stderr: Total rockridge attributes bytes: 3622
BraseroGenisoimage stderr: Total directory bytes: 8192
BraseroGenisoimage stderr: Path table size(bytes): 42
BraseroGenisoimage stderr: Max brk space used 0
BraseroGenisoimage stderr: 4110387 extents written (8028 MB)
BraseroGenisoimage stderr: HUP
BraseroGenisoimage process finished with status 0
BraseroGenisoimage Finished track successfully
BraseroGenisoimage called brasero_job_get_done_tracks
BraseroGenisoimage called brasero_job_get_fd_out
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage called brasero_job_get_output_type
BraseroGenisoimage Automatically adding track
BraseroGenisoimage called brasero_job_get_image_output
BraseroGenisoimage called brasero_job_get_session_output_size
BraseroGenisoimage called brasero_job_add_track
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage stopping
BraseroGenisoimage called brasero_job_get_done_tracks
BraseroChecksumImage called brasero_job_get_current_track
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_flags
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_fd_in
BraseroChecksumImage called brasero_job_set_output_size_for_current_track
BraseroChecksumImage stopping
BraseroChecksumImage called brasero_job_get_current_track
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage There is a checksum already 0
BraseroGrowisofs called brasero_job_get_action
BraseroGrowisofs getting varg
BraseroGrowisofs called brasero_job_get_action
BraseroGrowisofs called brasero_job_get_current_track
BraseroGrowisofs got varg:
BraseroGrowisofs deactivating
BraseroGrowisofs called brasero_job_get_action
BraseroGrowisofs getting varg
BraseroGrowisofs called brasero_job_get_action
BraseroGrowisofs called brasero_job_get_flags
BraseroGrowisofs called brasero_job_get_speed
BraseroGrowisofs called brasero_job_get_device
BraseroGrowisofs called brasero_job_get_action
BraseroGrowisofs called brasero_job_get_session_output_size
BraseroGrowisofs called brasero_job_get_current_track
BraseroGrowisofs called brasero_job_get_fd_in
BraseroGrowisofs called brasero_job_set_current_action
BraseroGrowisofs got varg:
   growisofs
   -use-the-force-luke=notray
   -use-the-force-luke=4gms
   -dvd-compat
   -speed=2
   -use-the-force-luke=tracksize:4110387
   -use-the-force-luke=tty
   -Z
   /dev/sr0=/tmp/brasero_tmp_X66DLV.bin
BraseroGrowisofs Launching command
BraseroGrowisofs called brasero_job_get_fd_out
BraseroGrowisofs called brasero_job_get_fd_in
BraseroGrowisofs called brasero_job_get_fd_out
BraseroGrowisofs stdout: Executing 'builtin_dd if=/tmp/brasero_tmp_X66DLV.bin of=/dev/sr0 obs=32k seek=0'
BraseroGrowisofs called brasero_job_set_dangerous
BraseroGrowisofs stderr: /dev/sr0: splitting layers at 2055200 blocks
BraseroGrowisofs stderr: /dev/sr0: "Current Write Speed" is 2.5x1352KBps.
BraseroGrowisofs stdout:    11632640/8418072576 ( 0.1%) @2.0x, remaining 72:15 RBU 100.0% UBU   2.0%
BraseroGrowisofs called brasero_job_get_action
BraseroGrowisofs called brasero_job_set_current_action
BraseroGrowisofs stdout:    22839296/8418072576 ( 0.3%) @2.4x, remaining 55:08 RBU 100.0% UBU  51.0%
BraseroGrowisofs called brasero_job_get_action
BraseroGrowisofs called brasero_job_set_current_action
BraseroGrowisofs stdout:    34045952/8418072576 ( 0.4%) @2.4x, remaining 53:21 RBU 100.0% UBU  51.0%



BraseroGrowisofs called brasero_job_get_action
BraseroGrowisofs called brasero_job_set_current_action
BraseroGrowisofs stdout:  4203708416/8418072576 (49.9%) @2.4x, remaining 21:57 RBU 100.0% UBU  61.2%
BraseroGrowisofs called brasero_job_get_action
BraseroGrowisofs called brasero_job_set_current_action
BraseroGrowisofs stdout:  4210655232/8418072576 (50.0%) @1.5x, remaining 21:55 RBU 100.0% UBU  59.2%
BraseroGrowisofs called brasero_job_get_action
BraseroGrowisofs called brasero_job_set_current_action
BraseroGrowisofs stdout:  4210655232/8418072576 (50.0%) @0.0x, remaining 21:58 RBU 100.0% UBU 100.0%
BraseroGrowisofs called brasero_job_get_action
BraseroGrowisofs called brasero_job_set_current_action
BraseroGrowisofs stdout:  4210655232/8418072576 (50.0%) @0.0x, remaining 22:02 RBU 100.0% UBU 100.0%
BraseroGrowisofs called brasero_job_get_action
BraseroGrowisofs called brasero_job_set_current_action
BraseroGrowisofs stdout:  4210655232/8418072576 (50.0%) @0.0x, remaining 22:05 RBU 100.0% UBU 100.0%
BraseroGrowisofs called brasero_job_get_action
BraseroGrowisofs called brasero_job_set_current_action
BraseroGrowisofs stderr: WRITE@LBA=1f5f30h failed with SK=3h/POWER CALIBRATION AREA ERROR]: Input/output error
BraseroGrowisofs stderr: :-( write failed: Input/output error
BraseroGrowisofs stdout: HUP
BraseroGrowisofs stderr: HUP
BraseroGrowisofs process finished with status 5
BraseroGrowisofs called brasero_job_error
BraseroGrowisofs finished with an error
BraseroGrowisofs asked to stop because of an error
   error      = 0
   message   = "no message"
BraseroGrowisofs stopping
Session error : unknown (brasero_burn_record brasero-burn.c:2842)

Привод - ASUS DRW1608P3S, диск - esperanto DVD+R DL. Что это может быть, неисправность привода, брак диска или баг Brasero? Особенно смущает "POWER CALIBRATION AREA ERROR" в конце лога.

[rocker]

Пока не разрешил проверку файлов вообще отказывался писать диски. А после включения опции проверка файлов записывает но на 34% вот такие письмена( см. аттач) и выплевывание диска.
Пользователь решил продолжить мысль [time]Sat Jun  4 09:58:43 2011[/time]:Снова вставил тот же диск ничего не менял в опциях записи и прекрасно записал DVD+R.
Пользователь решил продолжить мысль [time]Sun Jun  5 13:32:43 2011[/time]:Кому нибудь удалось победить запись Audio CD? Тормозит на 50%:
Лог отладки:

(Нажмите, чтобы показать/скрыть)

Devices
-----------------------
HUAWEI Mass Storage 2.31 (/dev/sr0, CD-ROM) [Ошибка] [Нет] [%7]
Slimtype DVD A  DS8A4S JA22 (/dev/sr1, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, Последовательный DVD-R, Двухслойный последовательный DVD-R, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW с ограниченной перезаписью, Последовательный DVD-RW, DVD+RW, DVD+R, Двухслойный DVD+R, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Ограниченная перезапись, Layer Jump] [%7]

System
-----------------------
K3b Version: 2.0.2
KDE Version: 4.6.2 (4.6.2)
QT Version:  4.7.2
Kernel:      2.6.38-8-generic

Used versions
-----------------------
cdrecord: 1.1.11

cdrecord
-----------------------
scsidev: '/dev/sr1'
devname: '/dev/sr1'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 0 = CD-DA
Driveropts: 'burnfree'
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'Slimtype'
Identification : 'DVD A  DS8A4S   '
Revision       : 'JA22'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A (CD-RW)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW) (current)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1867008 = 1823 KB
FIFO size      : 12582912 = 12288 KB
/usr/bin/wodim: No such file or directory. Cannot open '/home/vladimir/Шаблоны/k3b_audio_2_01.wav'.

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr1 speed=4 -sao driveropts=burnfree -useinfo -audio /home/vladimir/Шаблоны/k3b_audio_2_01.wav /home/vladimir/Шаблоны/k3b_audio_2_02.wav /home/vladimir/Шаблоны/k3b_audio_2_03.wav /home/vladimir/Шаблоны/k3b_audio_2_04.wav /home/vladimir/Шаблоны/k3b_audio_2_05.wav /home/vladimir/Шаблоны/k3b_audio_2_06.wav /home/vladimir/Шаблоны/k3b_audio_2_07.wav /home/vladimir/Шаблоны/k3b_audio_2_08.wav /home/vladimir/Шаблоны/k3b_audio_2_09.wav /home/vladimir/Шаблоны/k3b_audio_2_10.wav /home/vladimir/Шаблоны/k3b_audio_2_11.wav /home/vladimir/Шаблоны/k3b_audio_2_12.wav /home/vladimir/Шаблоны/k3b_audio_2_13.wav

Похоже не было нужных кодеков. Nero Linux решил все проблемы.