Форум русскоязычного сообщества Ubuntu


Следите за новостями русскоязычного сообщества Ubuntu в Twitter-ленте @ubuntu_ru_loco

Автор Тема: Проблема входа с windows машины зайти на Ubuntu сервер  (Прочитано 3028 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Оффлайн aasavelev

  • Автор темы
  • Новичок
  • *
  • Сообщений: 31
    • Просмотр профиля
Здравствуйте. Имеется домен kir.guszn.admkrsk.ru
Ввел в домен согласно инструкции
https://help.ubuntu.ru/wiki/%D0%B2%D0%B2%D0%BE%D0%B4_%D0%B2_%D0%B4%D0%BE%D0%BC%D0%B5%D0%BD_windows

Получил такой smb.conf

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
  workgroup = KIR
dos charset = CP866
UNIX CHARSET = UTF-8

realm = KIR.GUSZN.ADMKRSK.RU

security = ADS
auth methods = winbind
allow trusted domain=no
time server=no
ldap ssl=no

client use spnego principal=yes
encrypt passwords  = true
password server = dc-92
socket options =TCP_NODELAY
domain master =no
local master = no
preferred master = no
os level = 0
domain logons = no
# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)
idmap config * : range = 10000-2000
idmap config * : backend = tdb
winbind enum groups = yes
winbind enum users = yes
winbind use default domain = yes
template shell = /bin/bash
winbind refresh tickets = yes
winbind offline logon = yes
#username map = /etc/samba/smbusers
#отключить принтер
load printers =no
show add printer wizard = no
printcap name = /dev/null
disable spoolss = yes
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).


   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
   server role = standalone server

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using. 
   passdb backend = tdbsam

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe. 
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe. 
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   guest ok = no
   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin
[share]
comment = public
path = /home/public/
browseable = yes
admin users ="@KIR\users92"
writable = yes
read only=no
quest ok = yes
hide unradable = yes
При попытке зайти на сервер выдается окно запроса логина пароля вводишь пишет отказано в доступе.
Что я не правильно реализовал?
P.S. первый раз первый раз настраиваю Ubuntu

Оффлайн AnrDaemon

  • Заслуженный пользователь
  • Старожил
  • *
  • Сообщений: 28358
    • Просмотр профиля
wbinfo -t
?
Хотите получить помощь? Потрудитесь представить запрошенную информацию в полном объёме.

Прежде чем [Отправить], нажми [Просмотр] и прочти собственное сообщение. Сам-то понял, что написал?…

Оффлайн aasavelev

  • Автор темы
  • Новичок
  • *
  • Сообщений: 31
    • Просмотр профиля
Вот что выдало.
checking the trust secret for domain KIR via RPC calls failed
failed to call wbcCheckTrustCredentials: WBC_ERR_WINBIND_NOT_AVAILABLE
Could not check secret

Оффлайн AnrDaemon

  • Заслуженный пользователь
  • Старожил
  • *
  • Сообщений: 28358
    • Просмотр профиля
А машину в домен ввели?...
Хотите получить помощь? Потрудитесь представить запрошенную информацию в полном объёме.

Прежде чем [Отправить], нажми [Просмотр] и прочти собственное сообщение. Сам-то понял, что написал?…

Оффлайн aasavelev

  • Автор темы
  • Новичок
  • *
  • Сообщений: 31
    • Просмотр профиля
Вообще запись на сервер есть о компьютере с Ubuntu. Поэтому думаю что да. Единственное отличие что на сервере имеется запись с именем ubuntuserver. А в настройках я прописывал ubuntuServer. Может это как-то влияет? Также когда при настройке сервера у меня не появилась запись domain kir.guszn.admkrsk.ru в файле /etc/resolv.conf . При этом запись search kir.guszn.admkrsk.ru имеется.
Завтра еще раз попробую проверить настройки на ubuntu.

Оффлайн AnrDaemon

  • Заслуженный пользователь
  • Старожил
  • *
  • Сообщений: 28358
    • Просмотр профиля
Не надо ничего "думать".
net ads join
делали?
testparm -s
показывайте. И сравнивайте с тем, что вы в smb.conf понаписали.
Хотите получить помощь? Потрудитесь представить запрошенную информацию в полном объёме.

Прежде чем [Отправить], нажми [Просмотр] и прочти собственное сообщение. Сам-то понял, что написал?…

Оффлайн aasavelev

  • Автор темы
  • Новичок
  • *
  • Сообщений: 31
    • Просмотр профиля
Делал net ads join.

Если выполняю
Цитировать
net ads testjoin
под root то получаю Join is OK.
Если под пользователем то
 
Failed to open /var/lib/samba/private/secrets.tdb
Join to domain is not valid: Access denied
если я выполню команду wbinfo -t под root то тогда выйдет только строчка
checking the trust secret for domain KIR via RPC calls failed.

Выполняя testparm. Результат такой:
Processing section "[printers]"
Processing section "[print$]"
Loaded services file OK.
Server role: ROLE_DOMAIN_MEMBER
Press enter to see a dump of your service definitions

[global]
        workgroup = KIR
        realm = KIR.GUSZN.ADMKRSK.RU
        server string = %h server (Samba, Ubuntu)
        server role = standalone server
        security = ADS
        map to guest = Bad User
        obey pam restrictions = Yes
        pam password change = Yes
        passwd program = /usr/bin/passwd %u
        passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:                                                                             * %n\n *password\supdated\ssuccessfully* .
        unix password sync = Yes
        log file = /var/log/samba/log.%m
        max log size = 1000
        load printers = No
        printcap name = /dev/null
        disable spoolss = Yes
        show add printer wizard = No
        os level = 0
        local master = No
        domain master = No
        dns proxy = No
        usershare allow guests = Yes
        panic action = /usr/share/samba/panic-action %d
        template shell = /bin/bash
        winbind enum users = Yes
        winbind enum groups = Yes
        winbind use default domain = Yes
        winbind refresh tickets = Yes
        idmap config * :range = 10000 - 20000
        idmap config * : backend = tdb

[printers]
        comment = All Printers
        path = /var/spool/samba
        create mask = 0700
        printable = Yes
        print ok = Yes
        browseable = No

[print$]
        comment = Printer Drivers
        path = /var/lib/samba/printers
что написано в smb.conf:
[global]

        Workgroup = KIR
        realm = KIR.GUSZN.ADMKRSK.RU
        security = ADS
        encrypt passwords = true

        socket options = TCP_NODELAY

        domain master = no
        local master = no
        preferred master = no
        os level = 0
        domain logons = no

        load printers = no
        show add printer wizard = no
        printcap name = /dev/null
        disable spoolss =yes
# server string is the equivalent of the NT Description field
        server string = %h server (Samba, Ubuntu)

# настройки winbind
        idmap config * :range =  10000 - 20000
        idmap config * :backend = tdb
        winbind enum groups = yes
        winbind enum users = yes
        winbind use default domain = yes
        template shell = /bin/bash
        winbind refresh tickets = yes
        dns proxy = no
# настройка по умолчанию
        log file = /var/log/samba/log.%m
        max log size = 1000
        syslog = 1

        panic action = /usr/share/samba/panic-action %d

        server role = standalone server
        passdb backend = tdbsam

        obey pam restrictions = yes
        unix password sync = yes
        passwd program = /usr/bin/passwd %u
        passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
        pam password change = yes
        map to guest = bad user
        usershare allow guests = yes


Оффлайн ArcFi

  • Старожил
  • *
  • Сообщений: 15189
    • Просмотр профиля
    • aetera.net
А что говорят kinit, klist?

Оффлайн AnrDaemon

  • Заслуженный пользователь
  • Старожил
  • *
  • Сообщений: 28358
    • Просмотр профиля
Делал net ads join.

Если выполняю
Цитировать
net ads testjoin
под root то получаю Join is OK.
Если под пользователем то
 
Failed to open /var/lib/samba/private/secrets.tdb
Join to domain is not valid: Access denied
Естественно...
Хотите получить помощь? Потрудитесь представить запрошенную информацию в полном объёме.

Прежде чем [Отправить], нажми [Просмотр] и прочти собственное сообщение. Сам-то понял, что написал?…

Оффлайн aasavelev

  • Автор темы
  • Новичок
  • *
  • Сообщений: 31
    • Просмотр профиля
А что говорят kinit, klist?
kinit user@KIR.GUSZN.ADMKRSK.RU
Password for user@KIR.GUSZN.ADMKRSK.RU
Больше ни чего
Klist:
Ticket cache: FILE:/tmp/krb5cc_0
Default principal: user@KIR.GUSZN.ADMKRSK.RU

Valid starting       Expires              Service principal
16.06.2014 09:06:39  16.06.2014 19:06:39  krbtgt/KIR.GUSZN.ADMKRSK.RU@KIR.GUSZN.ADMKRSK.RU
        renew until 17.06.2014 09:06:34
Wbinfo -t выдает:
checking the trust secret for domain KIR via RPC calls succeeded.

Оффлайн ArcFi

  • Старожил
  • *
  • Сообщений: 15189
    • Просмотр профиля
    • aetera.net
head <(wbinfo -u) <(wbinfo -g)

Оффлайн aasavelev

  • Автор темы
  • Новичок
  • *
  • Сообщений: 31
    • Просмотр профиля
wbinfo -u
iwam_kab2-13-5-92
iusr_kab2-13-5-92
krbtgt
гость
И далее список пользователей например
user
Либо такой вид
GUSZN\гость
wbinfo -g Список групп
гости домена
издатели сертификатов
контроллеры домена
пользователи домена
администраторы домена
ит
и т.д.


Пользователь решил продолжить мысль 17 Июня 2014, 07:57:55:
Может на сервер с Windows 2008 r2 необходимо добавить какую-нибудь роль?
« Последнее редактирование: 17 Июня 2014, 07:57:55 от aasavelev »

Оффлайн aasavelev

  • Автор темы
  • Новичок
  • *
  • Сообщений: 31
    • Просмотр профиля
Решил проблему оказывается у меня samba4. И правильные настройки я взял от сюда:
https://wiki.samba.org/index.php/Setup_a_Samba_AD_Member_Server

 

Страница сгенерирована за 0.049 секунд. Запросов: 25.