Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Windows is installed in the MBR of /dev/sda.
=> Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector
42344480 of the same hard drive for core.img. core.img is at this location
and looks for (,gpt1)/boot/grub on this drive.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /Windows/System32/winload.exe
sdb1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04.5 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdb2: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS
/dev/sda2 206,848 3,907,026,943 3,906,820,096 7 NTFS / exFAT / HPFS
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 1 976,773,167 976,773,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sdb1 2,048 175,781,887 175,779,840 Data partition (Linux)
/dev/sdb2 175,781,888 193,359,871 17,577,984 Swap partition (Linux)
/dev/sdb3 193,359,872 976,771,071 783,411,200 Data partition (Linux)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 609857D49857A776 ntfs Зарезервировано системой
/dev/sda2 220E5B5D0E5B28D5 ntfs
/dev/sdb1 8a453483-e119-468a-a20a-e22c654b4d4e ext4
/dev/sdb2 809e9b5a-957b-4617-9629-08fee3e68449 swap
/dev/sdb3 0bddccb3-0bbf-437b-88e6-45ba46177e42 ext4
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sdb1 / ext4 (rw,errors=remount-ro)
/dev/sdb3 /home ext4 (rw)
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="5"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_gpt
insmod ext2
set root='(hd0,gpt1)'
search --no-floppy --fs-uuid --set=root 8a453483-e119-468a-a20a-e22c654b4d4e
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=1280x1024x24
load_video
insmod gfxterm
insmod part_gpt
insmod ext2
set root='(hd0,gpt1)'
search --no-floppy --fs-uuid --set=root 8a453483-e119-468a-a20a-e22c654b4d4e
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
set timeout=-1
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.13.0-74-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='(hd0,gpt1)'
search --no-floppy --fs-uuid --set=root 8a453483-e119-468a-a20a-e22c654b4d4e
linux /boot/vmlinuz-3.13.0-74-generic root=UUID=8a453483-e119-468a-a20a-e22c654b4d4e ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-74-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-74-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_gpt
insmod ext2
set root='(hd0,gpt1)'
search --no-floppy --fs-uuid --set=root 8a453483-e119-468a-a20a-e22c654b4d4e
echo 'Loading Linux 3.13.0-74-generic ...'
linux /boot/vmlinuz-3.13.0-74-generic root=UUID=8a453483-e119-468a-a20a-e22c654b4d4e ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-74-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 3.13.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='(hd0,gpt1)'
search --no-floppy --fs-uuid --set=root 8a453483-e119-468a-a20a-e22c654b4d4e
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=8a453483-e119-468a-a20a-e22c654b4d4e ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_gpt
insmod ext2
set root='(hd0,gpt1)'
search --no-floppy --fs-uuid --set=root 8a453483-e119-468a-a20a-e22c654b4d4e
echo 'Loading Linux 3.13.0-32-generic ...'
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=8a453483-e119-468a-a20a-e22c654b4d4e ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-32-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_gpt
insmod ext2
set root='(hd0,gpt1)'
search --no-floppy --fs-uuid --set=root 8a453483-e119-468a-a20a-e22c654b4d4e
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_gpt
insmod ext2
set root='(hd0,gpt1)'
search --no-floppy --fs-uuid --set=root 8a453483-e119-468a-a20a-e22c654b4d4e
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdb1 during installation
UUID=8a453483-e119-468a-a20a-e22c654b4d4e / ext4 errors=remount-ro 0 1
# /home was on /dev/sdb3 during installation
UUID=0bddccb3-0bbf-437b-88e6-45ba46177e42 /home ext4 defaults 0 2
# swap was on /dev/sdb2 during installation
UUID=809e9b5a-957b-4617-9629-08fee3e68449 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
= boot/grub/core.img 1
= boot/grub/grub.cfg 1
= boot/initrd.img-3.13.0-32-generic 1
= boot/initrd.img-3.13.0-74-generic 2
= boot/vmlinuz-3.13.0-32-generic 1
= boot/vmlinuz-3.13.0-74-generic 1
= initrd.img 2
= initrd.img.old 1
= vmlinuz 1
= vmlinuz.old 1
========= Devices which don't seem to have a corresponding hard drive: =========
sdc sdd sde sdf sdg
=============================== StdErr Messages: ===============================
xz: (stdin): Compressed data is corrupt
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
Тема: Не запускается линукс из BIOS (Прочитано 9548 раз)
