А вы так попробуйте
cat /var/log/syslog | grep -B 200 "kernel: imklog" | tail -n 200
В терминале должно пробежать 200 строк. Скопируйте их.
А вообще уже сейчас у вас в домашней папке лежит файл с именем forum.log
А вот так - другое дело. Вот они, заветные 200 строк. Надеюсь, Вы сможете мне помочь.
lucid@lynx:~$ cat /var/log/syslog | grep -B 200 "kernel: imklog" | tail -n 200
Aug 22 03:20:19 lynx kernel: [ 18.359274] yenta_cardbus 0000:09:01.0: TI: mfunc 0x015c1d22, devctl 0x44
Aug 22 03:20:19 lynx NetworkManager: <info> (eth0): new Ethernet device (driver: '8139too')
Aug 22 03:20:19 lynx NetworkManager: <info> (eth0): exported as /org/freedesktop/NetworkManager/Devices/0
Aug 22 03:20:19 lynx NetworkManager: <info> (eth0): now managed
Aug 22 03:20:19 lynx NetworkManager: <info> (eth0): device state change: 1 -> 2 (reason 2)
Aug 22 03:20:19 lynx NetworkManager: <info> (eth0): bringing up device.
Aug 22 03:20:19 lynx kernel: [ 18.406651] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Aug 22 03:20:19 lynx NetworkManager: <info> (eth0): preparing device.
Aug 22 03:20:19 lynx NetworkManager: <info> (eth0): deactivating device (reason: 2).
Aug 22 03:20:19 lynx NetworkManager: Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:14.4/0000:09:02.0/net/eth0
Aug 22 03:20:19 lynx NetworkManager: <info> (eth0): carrier now ON (device state 2)
Aug 22 03:20:19 lynx NetworkManager: <info> (eth0): device state change: 2 -> 3 (reason 40)
Aug 22 03:20:19 lynx NetworkManager: <info> modem-manager is now available
Aug 22 03:20:19 lynx NetworkManager: <WARN> default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files
Aug 22 03:20:19 lynx NetworkManager: <info> Trying to start the supplicant...
Aug 22 03:20:19 lynx NetworkManager: <info> Activation (eth0) starting connection 'Auto eth0'
Aug 22 03:20:19 lynx NetworkManager: <info> (eth0): device state change: 3 -> 4 (reason 0)
Aug 22 03:20:19 lynx NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled...
Aug 22 03:20:19 lynx NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started...
Aug 22 03:20:19 lynx NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled...
Aug 22 03:20:19 lynx NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete.
Aug 22 03:20:19 lynx NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting...
Aug 22 03:20:19 lynx NetworkManager: <info> (eth0): device state change: 4 -> 5 (reason 0)
Aug 22 03:20:19 lynx NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) successful.
Aug 22 03:20:19 lynx NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled.
Aug 22 03:20:19 lynx NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete.
Aug 22 03:20:19 lynx NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) started...
Aug 22 03:20:19 lynx NetworkManager: <info> (eth0): device state change: 5 -> 7 (reason 0)
Aug 22 03:20:19 lynx NetworkManager: <info> Activation (eth0) Beginning DHCP transaction (timeout in 45 seconds)
Aug 22 03:20:19 lynx NetworkManager: <info> dhclient started with pid 579
Aug 22 03:20:19 lynx NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP6 Configure Get) scheduled...
Aug 22 03:20:19 lynx NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) complete.
Aug 22 03:20:19 lynx NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP6 Configure Get) started...
Aug 22 03:20:19 lynx NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP6 Configure Get) complete.
Aug 22 03:20:19 lynx dhclient: Internet Systems Consortium DHCP Client V3.1.3
Aug 22 03:20:19 lynx dhclient: Copyright 2004-2009 Internet Systems Consortium.
Aug 22 03:20:19 lynx dhclient: All rights reserved.
Aug 22 03:20:19 lynx dhclient: For info, please visit
https://www.isc.org/software/dhcp/Aug 22 03:20:19 lynx dhclient:
Aug 22 03:20:19 lynx NetworkManager: <info> DHCP: device eth0 state changed (null) -> preinit
Aug 22 03:20:19 lynx dhclient: Listening on LPF/eth0/00:16:36:51:11:90
Aug 22 03:20:19 lynx dhclient: Sending on LPF/eth0/00:16:36:51:11:90
Aug 22 03:20:19 lynx dhclient: Sending on Socket/fallback
Aug 22 03:20:19 lynx kernel: [ 18.589632] yenta_cardbus 0000:09:01.0: ISA IRQ mask 0x0cf8, PCI irq 20
Aug 22 03:20:19 lynx kernel: [ 18.589639] yenta_cardbus 0000:09:01.0: Socket status: 30000020
Aug 22 03:20:19 lynx kernel: [ 18.589650] yenta_cardbus 0000:09:01.0: pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
Aug 22 03:20:19 lynx kernel: [ 18.589656] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xafff: clean.
Aug 22 03:20:19 lynx kernel: [ 18.589964] yenta_cardbus 0000:09:01.0: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
Aug 22 03:20:19 lynx kernel: [ 18.589969] yenta_cardbus 0000:09:01.0: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff
Aug 22 03:20:19 lynx kernel: [ 18.592616] [drm] Initialized drm 1.1.0 20060810
Aug 22 03:20:20 lynx dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3
Aug 22 03:20:20 lynx kernel: [ 18.739693] type=1505 audit(1313968820.008:5): operation="profile_replace" pid=640 name="/sbin/dhclient3"
Aug 22 03:20:20 lynx dhclient: DHCPOFFER of 192.168.0.102 from 192.168.0.1
Aug 22 03:20:20 lynx dhclient: DHCPREQUEST of 192.168.0.102 on eth0 to 255.255.255.255 port 67
Aug 22 03:20:20 lynx kernel: [ 18.760737] [drm] radeon defaulting to kernel modesetting.
Aug 22 03:20:20 lynx kernel: [ 18.760744] [drm] radeon kernel modesetting enabled.
Aug 22 03:20:20 lynx kernel: [ 18.760841] radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Aug 22 03:20:20 lynx kernel: [ 18.766141] type=1505 audit(1313968820.036:6): operation="profile_replace" pid=640 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Aug 22 03:20:20 lynx kernel: [ 18.766630] type=1505 audit(1313968820.036:7): operation="profile_replace" pid=640 name="/usr/lib/connman/scripts/dhclient-script"
Aug 22 03:20:20 lynx kernel: [ 18.768976] [drm] radeon: Initializing kernel modesetting.
Aug 22 03:20:20 lynx kernel: [ 18.770515] [drm] register mmio base: 0xD0100000
Aug 22 03:20:20 lynx kernel: [ 18.770520] [drm] register mmio size: 65536
Aug 22 03:20:20 lynx kernel: [ 18.770896] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
Aug 22 03:20:20 lynx kernel: [ 18.770924] [drm:rs400_gart_adjust_size] *ERROR* Forcing to 32M GART size (because of ASIC bug ?)
Aug 22 03:20:20 lynx kernel: [ 18.770986] [drm] Generation 2 PCI interface, using max accessible memory
Aug 22 03:20:20 lynx kernel: [ 18.770990] [drm] radeon: VRAM 32M
Aug 22 03:20:20 lynx kernel: [ 18.770992] [drm] radeon: VRAM from 0x1E000000 to 0x1FFFFFFF
Aug 22 03:20:20 lynx kernel: [ 18.770995] [drm] radeon: GTT 32M
Aug 22 03:20:20 lynx kernel: [ 18.770997] [drm] radeon: GTT from 0x20000000 to 0x21FFFFFF
Aug 22 03:20:20 lynx kernel: [ 18.771326] [drm] radeon: irq initialized.
Aug 22 03:20:20 lynx kernel: [ 18.771803] [drm] Detected VRAM RAM=32M, BAR=64M
Aug 22 03:20:20 lynx kernel: [ 18.771808] [drm] RAM width 128bits DDR
Aug 22 03:20:20 lynx kernel: [ 18.775383] [TTM] Zone kernel: Available graphics memory: 237818 kiB.
Aug 22 03:20:20 lynx kernel: [ 18.775412] [drm] radeon: 32M of VRAM memory ready
Aug 22 03:20:20 lynx kernel: [ 18.775416] [drm] radeon: 32M of GTT memory ready.
Aug 22 03:20:20 lynx kernel: [ 18.775435] [drm] GART: num cpu pages 8192, num gpu pages 8192
Aug 22 03:20:20 lynx kernel: [ 18.776280] [drm] radeon: 2 quad pipes, 1 z pipes initialized.
Aug 22 03:20:20 lynx kernel: [ 18.776651] [drm] radeon: cp idle (0x10000C03)
Aug 22 03:20:20 lynx dhclient: DHCPACK of 192.168.0.102 from 192.168.0.1
Aug 22 03:20:20 lynx kernel: [ 18.776821] [drm] Loading R300 Microcode
Aug 22 03:20:20 lynx kernel: [ 18.777262] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
Aug 22 03:20:20 lynx NetworkManager: <info> DHCP: device eth0 state changed preinit -> bound
Aug 22 03:20:20 lynx kernel: [ 18.806956] [drm] radeon: ring at 0x0000000020000000
Aug 22 03:20:20 lynx NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Aug 22 03:20:20 lynx kernel: [ 18.806986] [drm] ring test succeeded in 2 usecs
Aug 22 03:20:20 lynx kernel: [ 18.807147] [drm] radeon: ib pool ready.
Aug 22 03:20:20 lynx kernel: [ 18.807241] [drm] ib test succeeded in 0 usecs
Aug 22 03:20:20 lynx NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP4 Configure Get) started...
Aug 22 03:20:20 lynx kernel: [ 18.807298] [drm] Default TV standard: NTSC
Aug 22 03:20:20 lynx NetworkManager: <info> address 192.168.0.102
Aug 22 03:20:20 lynx kernel: [ 18.807300] [drm] 14.318180000 MHz TV ref clk
Aug 22 03:20:20 lynx kernel: [ 18.807398] [drm] Default TV standard: NTSC
Aug 22 03:20:20 lynx NetworkManager: <info> prefix 24 (255.255.255.0)
Aug 22 03:20:20 lynx kernel: [ 18.807401] [drm] 14.318180000 MHz TV ref clk
Aug 22 03:20:20 lynx kernel: [ 18.807443] [drm] Radeon Display Connectors
Aug 22 03:20:20 lynx NetworkManager: <info> gateway 192.168.0.1
Aug 22 03:20:20 lynx kernel: [ 18.807445] [drm] Connector 0:
Aug 22 03:20:20 lynx NetworkManager: <info> nameserver '192.168.0.1'
Aug 22 03:20:20 lynx kernel: [ 18.807447] [drm] VGA
Aug 22 03:20:20 lynx kernel: [ 18.807451] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
Aug 22 03:20:20 lynx NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) scheduled...
Aug 22 03:20:20 lynx kernel: [ 18.807453] [drm] Encoders:
Aug 22 03:20:20 lynx kernel: [ 18.807456] [drm] CRT1: INTERNAL_DAC2
Aug 22 03:20:20 lynx NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP4 Configure Get) complete.
Aug 22 03:20:20 lynx kernel: [ 18.807458] [drm] Connector 1:
Aug 22 03:20:20 lynx kernel: [ 18.807460] [drm] S-video
Aug 22 03:20:20 lynx kernel: [ 18.807461] [drm] Encoders:
Aug 22 03:20:20 lynx kernel: [ 18.807463] [drm] TV1: INTERNAL_DAC2
Aug 22 03:20:20 lynx NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) started...
Aug 22 03:20:20 lynx avahi-daemon[433]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.102.
Aug 22 03:20:20 lynx avahi-daemon[433]: New relevant interface eth0.IPv4 for mDNS.
Aug 22 03:20:20 lynx avahi-daemon[433]: Registering new address record for 192.168.0.102 on eth0.IPv4.
Aug 22 03:20:20 lynx dhclient: bound to 192.168.0.102 -- renewal in 38032 seconds.
Aug 22 03:20:20 lynx kernel: [ 18.847541] type=1505 audit(1313968820.116:
: operation="profile_load" pid=641 name="/usr/bin/evince"
Aug 22 03:20:20 lynx kernel: [ 18.899291] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Aug 22 03:20:20 lynx kernel: [ 18.910907] type=1505 audit(1313968820.180:9): operation="profile_load" pid=641 name="/usr/bin/evince-previewer"
Aug 22 03:20:20 lynx kernel: [ 18.920118] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x92a0b1, caps: 0xa04713/0x200000/0x0
Aug 22 03:20:20 lynx kernel: [ 18.920131] synaptics: Toshiba Satellite L100 detected, limiting rate to 40pps.
Aug 22 03:20:20 lynx kernel: [ 18.959068] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
Aug 22 03:20:20 lynx kernel: [ 18.963331] type=1505 audit(1313968820.232:10): operation="profile_load" pid=641 name="/usr/bin/evince-thumbnailer"
Aug 22 03:20:20 lynx kernel: [ 18.985059] ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Aug 22 03:20:20 lynx kernel: [ 19.028699] type=1505 audit(1313968820.300:11): operation="profile_load" pid=670 name="/usr/lib/cups/backend/cups-pdf"
Aug 22 03:20:20 lynx kernel: [ 19.096114] MC'97 0 converters and GPIO not ready (0x1)
Aug 22 03:20:20 lynx kernel: [ 19.121796] [drm] fb mappable at 0xD4040000
Aug 22 03:20:20 lynx kernel: [ 19.121801] [drm] vram apper at 0xD4000000
Aug 22 03:20:20 lynx kernel: [ 19.121803] [drm] size 1310720
Aug 22 03:20:20 lynx kernel: [ 19.121805] [drm] fb depth is 8
Aug 22 03:20:20 lynx kernel: [ 19.121807] [drm] pitch is 1280
Aug 22 03:20:20 lynx kernel: [ 19.138156] fb0: radeondrmfb frame buffer device
Aug 22 03:20:20 lynx kernel: [ 19.138244] registered panic notifier
Aug 22 03:20:20 lynx kernel: [ 19.138457] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0
Aug 22 03:20:20 lynx kernel: [ 19.151858] vga16fb: initializing
Aug 22 03:20:20 lynx kernel: [ 19.151867] vga16fb: mapped to 0xc00a0000
Aug 22 03:20:20 lynx kernel: [ 19.151875] vga16fb: not registering due to another framebuffer present
Aug 22 03:20:20 lynx kernel: [ 19.254008] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
Aug 22 03:20:20 lynx kernel: [ 19.254091] pci 0000:0a:00.0: reg 10 32bit mmio: [0x000000-0x01ffff]
Aug 22 03:20:20 lynx kernel: [ 19.291052] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
Aug 22 03:20:20 lynx kernel: [ 19.293542] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
Aug 22 03:20:20 lynx kernel: [ 19.294587] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
Aug 22 03:20:20 lynx kernel: [ 19.295452] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
Aug 22 03:20:20 lynx kernel: [ 19.301569] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
Aug 22 03:20:20 lynx kernel: [ 19.326720] Console: switching to colour frame buffer device 160x64
Aug 22 03:20:20 lynx gdm-binary[702]: WARNING: Unable to find users: no seat-id found
Aug 22 03:20:20 lynx init: apport pre-start process (790) terminated with status 1
Aug 22 03:20:20 lynx cron[800]: (CRON) INFO (pidfile fd = 3)
Aug 22 03:20:20 lynx anacron[814]: Anacron 2.3 started on 2011-08-22
Aug 22 03:20:20 lynx acpid: starting up with proc fs
Aug 22 03:20:20 lynx acpid: 36 rules loaded
Aug 22 03:20:20 lynx cron[820]: (CRON) STARTUP (fork ok)
Aug 22 03:20:20 lynx init: apport post-stop process (815) terminated with status 1
Aug 22 03:20:20 lynx cron[820]: (CRON) INFO (Running @reboot jobs)
Aug 22 03:20:20 lynx acpid: waiting for events: event logging is off
Aug 22 03:20:20 lynx anacron[814]: Normal exit (0 jobs run)
Aug 22 03:20:20 lynx kernel: [ 19.612087] ppdev: user-space parallel port driver
Aug 22 03:20:21 lynx avahi-daemon[433]: Registering new address record for fe80::216:36ff:fe51:1190 on eth0.*.
Aug 22 03:20:21 lynx NetworkManager: <info> (eth0): device state change: 7 -> 8 (reason 0)
Aug 22 03:20:21 lynx NetworkManager: <info> Policy set 'Auto eth0' (eth0) as default for routing and DNS.
Aug 22 03:20:21 lynx NetworkManager: <info> Activation (eth0) successful, device activated.
Aug 22 03:20:21 lynx NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) complete.
Aug 22 03:20:21 lynx avahi-daemon[433]: Got SIGTERM, quitting.
Aug 22 03:20:21 lynx avahi-daemon[433]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.0.102.
Aug 22 03:20:21 lynx init: avahi-daemon main process (433) terminated with status 255
Aug 22 03:20:21 lynx avahi: Avahi detected that your currently configured local DNS server serves
Aug 22 03:20:21 lynx acpid: client connected from 908[0:0]
Aug 22 03:20:21 lynx acpid: 1 client rule loaded
Aug 22 03:20:21 lynx avahi: a domain .local. This is inherently incompatible with Avahi and thus
Aug 22 03:20:21 lynx avahi: Avahi disabled itself. If you want to use Avahi in this network, please
Aug 22 03:20:21 lynx avahi: contact your administrator and convince him to use a different DNS domain,
Aug 22 03:20:21 lynx avahi: since .local should be used exclusively for Zeroconf technology.
Aug 22 03:20:21 lynx avahi: For more information, see
http://avahi.org/wiki/AvahiAndUnicastDotLocalAug 22 03:20:21 lynx anacron[1000]: Anacron 2.3 started on 2011-08-22
Aug 22 03:20:21 lynx anacron[1000]: Normal exit (0 jobs run)
Aug 22 03:20:22 lynx ntpdate[972]: step time server 91.189.94.4 offset 0.634320 sec
Aug 22 03:20:23 lynx gdm-session-worker[1035]: GLib-GObject-CRITICAL: g_value_get_boolean: assertion `G_VALUE_HOLDS_BOOLEAN (value)' failed
Aug 22 03:20:24 lynx rtkit-daemon[1110]: Sucessfully called chroot.
Aug 22 03:20:24 lynx rtkit-daemon[1110]: Sucessfully dropped privileges.
Aug 22 03:20:24 lynx rtkit-daemon[1110]: Sucessfully limited resources.
Aug 22 03:20:24 lynx rtkit-daemon[1110]: Running.
Aug 22 03:20:24 lynx rtkit-daemon[1110]: Watchdog thread running.
Aug 22 03:20:24 lynx rtkit-daemon[1110]: Canary thread running.
Aug 22 03:20:24 lynx polkitd[1114]: started daemon version 0.96 using authority implementation `local' version `0.96'
Aug 22 03:20:24 lynx rtkit-daemon[1110]: Sucessfully made thread 1108 of process 1108 (n/a) owned by '1000' high priority at nice level -11.
Aug 22 03:20:24 lynx rtkit-daemon[1110]: Supervising 1 threads of 1 processes of 1 users.
Aug 22 03:20:24 lynx rtkit-daemon[1110]: Sucessfully made thread 1117 of process 1108 (n/a) owned by '1000' RT at priority 5.
Aug 22 03:20:24 lynx rtkit-daemon[1110]: Supervising 2 threads of 1 processes of 1 users.
Aug 22 03:20:24 lynx rtkit-daemon[1110]: Sucessfully made thread 1118 of process 1108 (n/a) owned by '1000' RT at priority 5.
Aug 22 03:20:24 lynx rtkit-daemon[1110]: Supervising 3 threads of 1 processes of 1 users.
Aug 22 03:20:26 lynx anacron[1201]: Anacron 2.3 started on 2011-08-22
Aug 22 03:20:26 lynx anacron[1201]: Normal exit (0 jobs run)
Aug 22 03:20:30 lynx kernel: [ 28.768038] eth0: no IPv6 routers present
Aug 22 03:21:31 lynx AptDaemon: INFO: Initializing daemon
Aug 22 03:27:31 lynx AptDaemon: INFO: Quiting due to inactivity
Aug 22 03:27:31 lynx AptDaemon: INFO: Shutdown was requested
Aug 22 03:35:49 lynx kernel: [ 947.692674] CPU0: Temperature above threshold, cpu clock throttled (total events = 1)
Aug 22 03:35:49 lynx kernel: [ 947.692692] Disabling lock debugging due to kernel taint
Aug 22 03:35:49 lynx kernel: [ 947.693965] CPU0: Temperature/speed normal
Aug 22 03:40:01 lynx kernel: [ 1200.000082] Machine check events logged
Aug 22 03:41:14 lynx kernel: [ 1272.689470] CPU0: Temperature/speed normal
Aug 22 03:42:31 lynx kernel: [ 1350.000094] Machine check events logged
Aug 22 04:29:16 lynx kernel: imklog 4.2.0, log source = /proc/kmsg started.
lucid@lynx:~$