Здравствуйте, уважаемые знатоки. Есть такой зверь
https://istartedsomething.com/20070921/hp-pavilion-hdx-9000-review/ HP HDX 9000. Штука примечательная, в том числе наличием встроенного сабвуфера. Я попробовал его оживить вот по этой инструкции
https://habr.com/ru/post/343718/ - глухо. Предложите, пожалуйста, еще идеи.
Вводные:
1. На этом звере у меня Mint 20.3 с Cinnamon DE (я надеюсь, здесь нет правила посылать минтоводов в минтофорум?)
2. lspci -knn | egrep -iA3 'audio'
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
Subsystem: Hewlett-Packard Company 82801H (ICH8 Family) HD Audio Controller [103c:30d4]
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03)
--
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] RV630 HDMI Audio [Radeon HD 2600 PRO/XT / HD 3610] [1002:aa08]
Subsystem: Hewlett-Packard Company RV630 HDMI Audio [Radeon HD 2600 PRO/XT / HD 3610] [103c:30d4]
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
02:06.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05)
3. hdajacksensetest -a
Pin 0x0a (Black Headphone, Front side): present = No
Pin 0x0b (Black Headphone, Front side): present = No
Pin 0x0c (Internal Speaker): present = No
Pin 0x0d (Not connected): present = No
Pin 0x0e (Black Mic, Front side): present = No
Pin 0x0f (Not connected): present = No
Pin 0x10 (Not connected): present = No
Pin 0x11 (Not connected): present = No
Pin 0x12 (Internal Mic): present = No
Pin 0x21 (Black SPDIF Out, Rear side): present = No
Pin 0x22 (Not connected): present = No
4. pulseaudio daemon.conf
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; enable-memfd = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
; nice-level = -11
; realtime-scheduling = yes
; realtime-priority = 5
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0
; resample-method = speex-float-1
; avoid-resampling = false
enable-remixing = yes
; remixing-use-all-sink-channels = yes
remixing-produce-lfe = yes
remixing-consume-lfe = no
lfe-crossover-freq = 150
; flat-volumes = no
; rescue-streams = yes
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 200000
; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
default-sample-channels = 3
default-channel-map = front-left,front-right,lfe
; default-fragments = 4
; default-fragment-size-msec = 25
; enable-deferred-volume = yes
deferred-volume-safety-margin-usec = 1
; deferred-volume-extra-delay-usec = 0
5. модель звуковой карты через alsamixer SigmaTel STAC9271D
6. Попытки переназначить выход адаптера через sudo hdajackretask результата не дали. Выбираю в гуе нужные значения для Pin 0x0c (Internal Speaker), применить после перезагрузки, ребут - вывод hdajacksensetest -a не меняется.
7. Что в Алсамиксере, что в pavucontrol мне предлагаются только конфигурации "стерео выход" и "стерео дуплекс".
Куда бы еще копнуть?