как установить wxpython phoenix на python 3.5.2?

[7hefa11]

Здравствуйте товарищи, убунтоводы питонисты!
помогите прикрутить библиотеку wxpython phoenix к python 3.5.2

мучаюсь давно уже и возможно нужно как то всё откатить назад и сделать с нуля
сейчас выдает вот что:

Код: [Выделить]

valerius@undead711:~$ pip install -U --pre -f https://wxpython.org/Phoenix/snapshot-builds/ wxPython_Phoenix
Collecting wxPython_Phoenix
  Using cached https://wxpython.org/Phoenix/snapshot-builds/wxPython_Phoenix-3.0.3.dev2680+55dda48.tar.gz
Requirement already up-to-date: six in /usr/lib/python3/dist-packages (from wxPython_Phoenix)
Building wheels for collected packages: wxPython-Phoenix
  Running setup.py bdist_wheel for wxPython-Phoenix ... error
  Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-z1slnkrq/wxPython-Phoenix/setup.py';exec(compile(getattr(tokenize, 'open', open)(__file__).read().replace('\r\n', '\n'), __file__, 'exec'))" bdist_wheel -d /tmp/tmppiu8mr28pip-wheel- --python-tag cp35:
  running bdist_wheel
  running build
  WARNING: Building this way assumes that all generated files have been
  generated already.  If that is not the case then use build.py directly
  to generate the source and perform the build stage.  You can use
  --skip-build with the bdist_* or install commands to avoid this
  message and the wxWidgets and Phoenix build steps in the future.

.
.
.

Failed building wheel for wxPython-Phoenix
  Running setup.py clean for wxPython-Phoenix
Failed to build wxPython-Phoenix
Installing collected packages: wxPython-Phoenix
  Running setup.py install for wxPython-Phoenix ... error
    Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-z1slnkrq/wxPython-Phoenix/setup.py';exec(compile(getattr(tokenize, 'open', open)(__file__).read().replace('\r\n', '\n'), __file__, 'exec'))" install --record /tmp/pip-mkvisfx9-record/install-record.txt --single-version-externally-managed --compile:
    running install
    running build
.
.
.
    Error running configure
    ERROR: failed building wxWidgets
    Traceback (most recent call last):
      File "build.py", line 1188, in cmd_build_wx
        wxbuild.main(wxDir(), build_options)
      File "/tmp/pip-build-z1slnkrq/wxPython-Phoenix/buildtools/build_wxwidgets.py", line 368, in main
        "Error running configure")
      File "/tmp/pip-build-z1slnkrq/wxPython-Phoenix/buildtools/build_wxwidgets.py", line 85, in exitIfError
        raise builder.BuildError(msg)
    buildtools.builder.BuildError: Error running configure
    Finished command: build_wx (0m5.295s)
    Finished command: build (0m5.295s)
    Command '"/usr/bin/python3" -u build.py build' failed with exit code 1.
   
    ----------------------------------------
Command "/usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-z1slnkrq/wxPython-Phoenix/setup.py';exec(compile(getattr(tokenize, 'open', open)(__file__).read().replace('\r\n', '\n'), __file__, 'exec'))" install --record /tmp/pip-mkvisfx9-record/install-record.txt --single-version-externally-managed --compile" failed with error code 1 in /tmp/pip-build-z1slnkrq/wxPython-Phoenix/

ну и очевидный исход (( :

Python 3.5.2 (default, Sep 10 2016, 08:21:44)
[GCC 5.4.0 20160609] on linux
Type "copyright", "credits" or "license()" for more information.
>>> import wx
Traceback (most recent call last):
  File "<pyshell#0>", line 1, in <module>
    import wx
ImportError: No module named 'wx'
>>>

Завернул код в тег code, как положено по правилам -Дмитрий Бо

[zotkindm]

https://wiki.wxpython.org/How%20to%20install%20wxPython


Но лучше через sudo apt-get install <пакет>

[7hefa11]

это инструкция для версии питона 2.7 надо для 3.5.2
соотвественно если кто-нить знает подскажите я хоть в нужном направлении копаю?

Код: [Выделить]

valerius@undead711:~/Downloads$ pip3 install wxPython_Phoenix-3.0.3.dev2648+23be602.tar.gz
Processing ./wxPython_Phoenix-3.0.3.dev2648+23be602.tar.gz
Requirement already satisfied (use --upgrade to upgrade): six in /usr/lib/python3/dist-packages (from wxPython-Phoenix==3.0.3.dev2648+23be602)
Building wheels for collected packages: wxPython-Phoenix
  Running setup.py bdist_wheel for wxPython-Phoenix ... error
  Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-f7j6kdb0-build/setup.py';exec(compile(getattr(tokenize, 'open', open)(__file__).read().replace('\r\n', '\n'), __file__, 'exec'))" bdist_wheel -d /tmp/tmpvd9dp1e9pip-wheel- --python-tag cp35:
  running bdist_wheel
  running build
  WARNING: Building this way assumes that all generated files have been
  generated already.  If that is not the case then use build.py directly
  to generate the source and perform the build stage.  You can use
  --skip-build with the bdist_* or install commands to avoid this
  message and the wxWidgets and Phoenix build steps in the future.
 
  "/usr/bin/python3" -u build.py build
  Will build using: "/usr/bin/python3"
  3.5.2 (default, Sep 10 2016, 08:21:44)
  [GCC 5.4.0 20160609]
  Python's architecture is 64bit
  cfg.VERSION: 3.0.3.dev2648+23be602
 
  Running command: build
  Running command: build_wx
  wxWidgets build options: ['--wxpython', '--unicode']
  Configure options: ['--enable-unicode', '--with-opengl', '--enable-sound', '--enable-graphics_ctx', '--enable-mediactrl', '--enable-display', '--enable-geometry', '--enable-debug_flag', '--enable-optimise', '--disable-debugreport', '--enable-uiactionsim', '--with-sdl']
  /tmp/pip-f7j6kdb0-build/ext/wxWidgets/configure --enable-unicode --with-opengl --enable-sound --enable-graphics_ctx --enable-mediactrl --enable-display --enable-geometry --enable-debug_flag --enable-optimise --disable-debugreport --enable-uiactionsim --with-sdl
  checking build system type... x86_64-unknown-linux-gnu
  checking host system type... x86_64-unknown-linux-gnu
  checking for --disable-gui... no
  *
  *
  *
 
  checking for pkg-config... /usr/bin/pkg-config
  checking for GTK+ - version >= 2.6.0... Package gtk+-2.0 was not found in the pkg-config search path.
  Perhaps you should add the directory containing `gtk+-2.0.pc'
  to the PKG_CONFIG_PATH environment variable
  No package 'gtk+-2.0' found
  Package gthread-2.0 was not found in the pkg-config search path.
  Perhaps you should add the directory containing `gthread-2.0.pc'
  to the PKG_CONFIG_PATH environment variable
  No package 'gthread-2.0' found
  no
  *** Could not run GTK+ test program, checking why...
  *** The test program failed to compile or link. See the file config.log for the
  *** exact error that occurred. This usually means GTK+ is incorrectly installed.
  checking for pkg-config... (cached) /usr/bin/pkg-config
  checking for GTK+ - version >= 3.0.0... Package gtk+-3.0 was not found in the pkg-config search path.
  Perhaps you should add the directory containing `gtk+-3.0.pc'
  to the PKG_CONFIG_PATH environment variable
  No package 'gtk+-3.0' found
  Package gthread-2.0 was not found in the pkg-config search path.
  Perhaps you should add the directory containing `gthread-2.0.pc'
  to the PKG_CONFIG_PATH environment variable
  No package 'gthread-2.0' found
  no
  *** Could not run GTK+ test program, checking why...
  *** The test program failed to compile or link. See the file config.log for the
  *** exact error that occured. This usually means GTK+ is incorrectly installed.
  checking for gtk-config... no
  checking for GTK - version >= 1.2.7... no
  *** The gtk-config script installed by GTK could not be found
  *** If GTK was installed in PREFIX, make sure PREFIX/bin is in
  *** your path, or set the GTK_CONFIG environment variable to the
  *** full path to gtk-config.
  checking for gtk-config... (cached) no
  checking for GTK - version >= 1.2.3... no
  *** The gtk-config script installed by GTK could not be found
  *** If GTK was installed in PREFIX, make sure PREFIX/bin is in
  *** your path, or set the GTK_CONFIG environment variable to the
  *** full path to gtk-config.
  configure: error:
  The development files for GTK+ were not found. For GTK+ 2, please
  ensure that pkg-config is in the path and that gtk+-2.0.pc is
  installed. For GTK+ 1.2 please check that gtk-config is in the path,
  and that the version is 1.2.3 or above. Also check that the
  libraries returned by 'pkg-config gtk+-2.0 --libs' or 'gtk-config
  --libs' are in the LD_LIBRARY_PATH or equivalent.
 
  Error running configure
  ERROR: failed building wxWidgets
  Traceback (most recent call last):
    File "build.py", line 1188, in cmd_build_wx
      wxbuild.main(wxDir(), build_options)
    File "/tmp/pip-f7j6kdb0-build/buildtools/build_wxwidgets.py", line 368, in main
      "Error running configure")
    File "/tmp/pip-f7j6kdb0-build/buildtools/build_wxwidgets.py", line 85, in exitIfError
      raise builder.BuildError(msg)
  buildtools.builder.BuildError: Error running configure
  Finished command: build_wx (0m5.680s)
  Finished command: build (0m5.680s)
  Command '"/usr/bin/python3" -u build.py build' failed with exit code 1.
 
  ----------------------------------------
  Failed building wheel for wxPython-Phoenix
  Running setup.py clean for wxPython-Phoenix
Failed to build wxPython-Phoenix
Installing collected packages: wxPython-Phoenix
  Running setup.py install for wxPython-Phoenix ... error
    Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-f7j6kdb0-build/setup.py';exec(compile(getattr(tokenize, 'open', open)(__file__).read().replace('\r\n', '\n'), __file__, 'exec'))" install --record /tmp/pip-n5fq0woe-record/install-record.txt --single-version-externally-managed --compile:
    running install
    running build
    WARNING: Building this way assumes that all generated files have been
    generated already.  If that is not the case then use build.py directly
    to generate the source and perform the build stage.  You can use
    --skip-build with the bdist_* or install commands to avoid this
    message and the wxWidgets and Phoenix build steps in the future.
   
    "/usr/bin/python3" -u build.py build
    Will build using: "/usr/bin/python3"
    3.5.2 (default, Sep 10 2016, 08:21:44)
    [GCC 5.4.0 20160609]
    Python's architecture is 64bit
    cfg.VERSION: 3.0.3.dev2648+23be602
   
    Running command: build
    Running command: build_wx
    wxWidgets build options: ['--wxpython', '--unicode']
    Configure options: ['--enable-unicode', '--with-opengl', '--enable-sound', '--enable-graphics_ctx', '--enable-mediactrl', '--enable-display', '--enable-geometry', '--enable-debug_flag', '--enable-optimise', '--disable-debugreport', '--enable-uiactionsim', '--with-sdl']
    /tmp/pip-f7j6kdb0-build/ext/wxWidgets/configure --enable-unicode --with-opengl --enable-sound --enable-graphics_ctx --enable-mediactrl --enable-display --enable-geometry --enable-debug_flag --enable-optimise --disable-debugreport --enable-uiactionsim --with-sdl
    checking build system type... x86_64-unknown-linux-gnu
    checking host system type... x86_64-unknown-linux-gnu
    checking for --disable-gui... no
    checking for --enable-monolithic... no
    checking for --enable-plugins... no
    checking for --without-subdirs... no
    checking for --enable-official_build... no
    checking for --disable-all-features... no
    checking for --enable-universal... no
    checking for --enable-nanox... no
    checking for --enable-gpe... no
    checking for toolkit... gtk
    checking for --with-libpng... yes
    checking for --with-libjpeg... yes
    checking for --with-libtiff... yes
    checking for --without-libjbig... no
    checking for --without-liblzma... no
    checking for --with-libxpm... yes
    checking for --with-libiconv... yes
    checking for --with-libmspack... no
    checking for --without-gtkprint... no
    checking for --with-gnomevfs... no
    checking for --with-libnotify... yes
    checking for --with-hildon... no
    checking for --with-opengl... yes
    checking for --with-dmalloc... no
    checking for --with-sdl... yes
    checking for --with-regex... yes
    checking for --with-zlib... yes
    checking for --with-expat... yes
    checking for --with-macosx-sdk...
    checking for --with-macosx-version-min...
    checking for --enable-debug... default
    checking for --disable-debug_flag... no
    checking for --enable-debug_info... no
    checking for --enable-debug_gdb... no
    checking for --enable-debug_cntxt... no
    checking for --enable-mem_tracing... no
    checking for --disable-shared... no
    checking for --enable-stl... no
    checking for --enable-std_containers... no
    checking for --enable-std_iostreams... yes
    checking for --enable-std_string... yes
    checking for --enable-std_string_conv_in_wxstring... no
    checking for --disable-unicode... no
    checking for --enable-mslu... no
    checking for --enable-utf8... no
    checking for --enable-utf8only... no
    checking for --enable-extended_rtti... no
    checking for --disable-optimise... no
    checking for --enable-profile... no
    checking for --enable-no_rtti... no
    checking for --enable-no_exceptions... no
    checking for --enable-permissive... no
    checking for --enable-no_deps... no
    checking for --disable-vararg_macros... no
    checking for --enable-universal_binary... no
    checking for --enable-macosx_arch... no
    checking for --enable-compat26... no
    checking for --disable-compat28... no
    checking for --disable-rpath... no
    checking for --enable-objc_uniquifying... no
    checking for --disable-visibility... no
    checking for --disable-tls... no
    checking for --enable-intl... yes
    checking for --enable-xlocale... yes
    checking for --enable-config... yes
    checking for --enable-protocols... yes
    checking for --enable-ftp... yes
    checking for --enable-http... yes
    checking for --enable-fileproto... yes
    checking for --enable-sockets... yes
    checking for --enable-ipv6... no
    checking for --enable-ole... yes
    checking for --enable-dataobj... yes
    checking for --enable-ipc... yes
    checking for --enable-baseevtloop... yes
    checking for --enable-epollloop... yes
    checking for --enable-selectloop... yes
    checking for --enable-any... yes
    checking for --enable-apple_ieee... yes
    checking for --enable-arcstream... yes
    checking for --enable-base64... yes
    checking for --enable-backtrace... yes
    checking for --enable-catch_segvs... yes
    checking for --enable-cmdline... yes
    checking for --enable-datetime... yes
    checking for --enable-debugreport... no
    checking for --enable-dialupman... yes
    checking for --enable-dynlib... yes
    checking for --enable-dynamicloader... yes
    checking for --enable-exceptions... yes
    checking for --enable-ffile... yes
    checking for --enable-file... yes
    checking for --enable-filehistory... yes
    checking for --enable-filesystem... yes
    checking for --enable-fontenum... yes
    checking for --enable-fontmap... yes
    checking for --enable-fs_archive... yes
    checking for --enable-fs_inet... yes
    checking for --enable-fs_zip... yes
    checking for --enable-fsvolume... yes
    checking for --enable-fswatcher... yes
    checking for --enable-geometry... yes
    checking for --enable-log... yes
    checking for --enable-longlong... yes
    checking for --enable-mimetype... yes
    checking for --enable-printfposparam... yes
    checking for --enable-snglinst... yes
    checking for --enable-sound... yes
    checking for --enable-stdpaths... yes
    checking for --enable-stopwatch... yes
    checking for --enable-streams... yes
    checking for --enable-sysoptions... yes
    checking for --enable-tarstream... yes
    checking for --enable-textbuf... yes
    checking for --enable-textfile... yes
    checking for --enable-timer... yes
    checking for --enable-variant... yes
    checking for --enable-zipstream... yes
    checking for --enable-url... yes
    checking for --enable-protocol... yes
    checking for --enable-protocol_http... yes
    checking for --enable-protocol_ftp... yes
    checking for --enable-protocol_file... yes
    checking for --enable-threads... yes
    checking for --enable-iniconf... no
    checking for --enable-regkey... yes
    checking for --enable-docview... yes
    checking for --enable-help... yes
    checking for --enable-mshtmlhelp... yes
    checking for --enable-html... yes
    checking for --enable-htmlhelp... yes
    checking for --enable-xrc... yes
    checking for --enable-aui... yes
    checking for --enable-propgrid... yes
    checking for --enable-ribbon... yes
    checking for --enable-stc... yes
    checking for --enable-constraints... yes
    checking for --enable-loggui... yes
    checking for --enable-logwin... yes
    checking for --enable-logdialog... yes
    checking for --enable-mdi... yes
    checking for --enable-mdidoc... yes
    checking for --enable-mediactrl... yes
    checking for --enable-gstreamer8... no
    checking for --enable-richtext... yes
    checking for --enable-postscript... yes
    checking for --enable-printarch... yes
    checking for --enable-svg... yes
    checking for --enable-webkit... yes
    checking for --enable-webview... yes
    checking for --enable-graphics_ctx... yes
    checking for --enable-clipboard... yes
    checking for --enable-dnd... yes
    checking for --disable-controls... no
    checking for --enable-markup... yes
    checking for --enable-accel... yes
    checking for --enable-animatectrl... yes
    checking for --enable-bannerwindow... yes
    checking for --enable-artstd... yes
    checking for --enable-arttango... auto
    checking for --enable-bmpbutton... yes
    checking for --enable-bmpcombobox... yes
    checking for --enable-button... yes
    checking for --enable-calendar... yes
    checking for --enable-caret... yes
    checking for --enable-checkbox... yes
    checking for --enable-checklst... yes
    checking for --enable-choice... yes
    checking for --enable-choicebook... yes
    checking for --enable-collpane... yes
    checking for --enable-colourpicker... yes
    checking for --enable-combobox... yes
    checking for --enable-comboctrl... yes
    checking for --enable-commandlinkbutton... yes
    checking for --enable-dataviewctrl... yes
    checking for --enable-datepick... yes
    checking for --enable-detect_sm... yes
    checking for --enable-dirpicker... yes
    checking for --enable-display... yes
    checking for --enable-editablebox... yes
    checking for --enable-filectrl... yes
    checking for --enable-filepicker... yes
    checking for --enable-fontpicker... yes
    checking for --enable-gauge... yes
    checking for --enable-grid... yes
    checking for --enable-headerctrl... yes
    checking for --enable-hyperlink... yes
    checking for --enable-imaglist... yes
    checking for --enable-infobar... yes
    checking for --enable-listbook... yes
    checking for --enable-listbox... yes
    checking for --enable-listctrl... yes
    checking for --enable-notebook... yes
    checking for --enable-notifmsg... yes
    checking for --enable-odcombobox... yes
    checking for --enable-popupwin... yes
    checking for --enable-prefseditor... yes
    checking for --enable-radiobox... yes
    checking for --enable-radiobtn... yes
    checking for --enable-richmsgdlg... yes
    checking for --enable-richtooltip... yes
    checking for --enable-rearrangectrl... yes
    checking for --enable-sash... yes
    checking for --enable-scrollbar... yes
    checking for --enable-searchctrl... yes
    checking for --enable-slider... yes
    checking for --enable-spinbtn... yes
    checking for --enable-spinctrl... yes
    checking for --enable-splitter... yes
    checking for --enable-statbmp... yes
    checking for --enable-statbox... yes
    checking for --enable-statline... yes
    checking for --enable-stattext... yes
    checking for --enable-statusbar... yes
    checking for --enable-taskbaricon... yes
    checking for --enable-tbarnative... yes
    checking for --enable-textctrl... yes
    checking for --enable-datepick... yes
    checking for --enable-tipwindow... yes
    checking for --enable-togglebtn... yes
    checking for --enable-toolbar... yes
    checking for --enable-toolbook... yes
    checking for --enable-treebook... yes
    checking for --enable-treectrl... yes
    checking for --enable-treelist... yes
    checking for --enable-commondlg... yes
    checking for --enable-aboutdlg... yes
    checking for --enable-choicedlg... yes
    checking for --enable-coldlg... yes
    checking for --enable-filedlg... yes
    checking for --enable-finddlg... yes
    checking for --enable-fontdlg... yes
    checking for --enable-dirdlg... yes
    checking for --enable-msgdlg... yes
    checking for --enable-numberdlg... yes
    checking for --enable-splash... yes
    checking for --enable-textdlg... yes
    checking for --enable-tipdlg... yes
    checking for --enable-progressdlg... yes
    checking for --enable-wizarddlg... yes
    checking for --enable-menus... yes
    checking for --enable-miniframe... yes
    checking for --enable-tooltips... yes
    checking for --enable-splines... yes
    checking for --enable-mousewheel... yes
    checking for --enable-validators... yes
    checking for --enable-busyinfo... yes
    checking for --enable-hotkey... auto
    checking for --enable-joystick... yes
    checking for --enable-metafile... auto
    checking for --enable-dragimage... yes
    checking for --enable-accessibility... no
    checking for --enable-uiactionsim... yes
    checking for --enable-dctransform... yes
    checking for --enable-webviewwebkit... yes
    checking for --enable-palette... yes
    checking for --enable-image... yes
    checking for --enable-gif... yes
    checking for --enable-pcx... yes
    checking for --enable-tga... yes
    checking for --enable-iff... yes
    checking for --enable-pnm... yes
    checking for --enable-xpm... yes
    checking for --enable-ico_cur... yes
    checking for --enable-dccache... yes
    checking for --enable-ps-in-msw... yes
    checking for --enable-ownerdrawn... yes
    checking for --enable-uxtheme... yes
    checking for --enable-wxdib... yes
    checking for --enable-webviewie... yes
    checking for --enable-autoidman... no
    checking for gcc... gcc
    checking whether the C compiler works... yes
    checking for C compiler default output file name... a.out
    checking for suffix of executables...
    checking whether we are cross compiling... no
    checking for suffix of object files... o
    checking whether we are using the GNU C compiler... yes
    checking whether gcc accepts -g... yes
    checking for gcc option to accept ISO C89... none needed
    checking whether we are using the Intel C compiler... no
    checking how to run the C preprocessor... gcc -E
    checking for grep that handles long lines and -e... /bin/grep
    checking for egrep... /bin/grep -E
    checking whether gcc needs -traditional... no
    checking for g++... g++
    checking whether we are using the GNU C++ compiler... yes
    checking whether g++ accepts -g... yes
    checking whether we are using the Intel C++ compiler... no
    checking whether we are using the Sun C++ compiler... no
    checking for ar... ar
    checking for ANSI C header files... yes
    checking for sys/types.h... yes
    checking for sys/stat.h... yes
    checking for stdlib.h... yes
    checking for string.h... yes
    checking for memory.h... yes
    checking for strings.h... yes
    checking for inttypes.h... yes
    checking for stdint.h... yes
    checking for unistd.h... yes
    checking for langinfo.h... yes
    checking for wchar.h... yes
    checking for sys/select.h... yes
    checking for cxxabi.h... yes
    checking for an ANSI C-conforming const... yes
    checking for inline... inline
    checking size of short... 2
    checking size of void *... 8
    checking size of int... 4
    checking size of long... 8
    checking size of size_t... 8
    checking size of long long... 8
    checking size of wchar_t... 4
    checking for va_copy... yes
    checking whether the compiler supports variadic macros... yes
    checking for _FILE_OFFSET_BITS value needed for large files... 64
    checking if large file support is available... yes
    checking for _LARGEFILE_SOURCE value needed for large files... no
    checking whether byte ordering is bigendian... no
    checking for iostream... yes
    checking if C++ compiler supports the explicit keyword... yes
    checking for std::wstring in <string>... yes
    checking for std::istream... yes
    checking for std::ostream... yes
    checking how to run the C++ preprocessor... g++ -E
    checking type_traits usability... no
    checking type_traits presence... no
    checking for type_traits... no
    checking tr1/type_traits usability... yes
    checking tr1/type_traits presence... yes
    checking for tr1/type_traits... yes
    checking for __sync_fetch_and_add and __sync_sub_and_fetch builtins... yes
    checking for libraries directories... /usr/lib/x86_64-linux-gnu /usr/lib
    checking for cos... no
    checking for floor... no
    checking if floating point functions link without -lm... no
    checking for sin... yes
    checking for ceil... yes
    checking if floating point functions link with -lm... yes
    checking for strtoull... yes
    configure: WARNING: Defaulting to the builtin regex library for Unicode build.
    checking for zlib.h >= 1.1.4... no
    checking for zlib.h... (cached) no
    configure: WARNING: zlib library not found or too old, will use built-in instead
    checking for png.h > 0.90... no
    checking for png.h... (cached) no
    configure: WARNING: system png library not found or too old, will use built-in instead
    checking for jpeglib.h... no
    configure: WARNING: system jpeg library not found, will use built-in instead
    checking for tiffio.h... no
    configure: WARNING: system tiff library not found, will use built-in instead
    checking for lzma_code in -llzma... no
    checking for jbg_dec_init in -ljbig... no
    checking for expat.h... yes
    checking if expat.h is valid C++ header... yes
    checking for XML_ParserCreate in -lexpat... yes
    checking for GTK+ version...
    checking for pkg-config... /usr/bin/pkg-config
    checking for GTK+ - version >= 2.6.0... Package gtk+-2.0 was not found in the pkg-config search path.
    Perhaps you should add the directory containing `gtk+-2.0.pc'
    to the PKG_CONFIG_PATH environment variable
    No package 'gtk+-2.0' found
    Package gthread-2.0 was not found in the pkg-config search path.
    Perhaps you should add the directory containing `gthread-2.0.pc'
    to the PKG_CONFIG_PATH environment variable
    No package 'gthread-2.0' found
    no
    *** Could not run GTK+ test program, checking why...
    *** The test program failed to compile or link. See the file config.log for the
    *** exact error that occurred. This usually means GTK+ is incorrectly installed.
    checking for pkg-config... (cached) /usr/bin/pkg-config
    checking for GTK+ - version >= 3.0.0... Package gtk+-3.0 was not found in the pkg-config search path.
    Perhaps you should add the directory containing `gtk+-3.0.pc'
    to the PKG_CONFIG_PATH environment variable
    No package 'gtk+-3.0' found
    Package gthread-2.0 was not found in the pkg-config search path.
    Perhaps you should add the directory containing `gthread-2.0.pc'
    to the PKG_CONFIG_PATH environment variable
    No package 'gthread-2.0' found
    no
    *** Could not run GTK+ test program, checking why...
    *** The test program failed to compile or link. See the file config.log for the
    *** exact error that occured. This usually means GTK+ is incorrectly installed.
    checking for gtk-config... no
    checking for GTK - version >= 1.2.7... no
    *** The gtk-config script installed by GTK could not be found
    *** If GTK was installed in PREFIX, make sure PREFIX/bin is in
    *** your path, or set the GTK_CONFIG environment variable to the
    *** full path to gtk-config.
    checking for gtk-config... (cached) no
    checking for GTK - version >= 1.2.3... no
    *** The gtk-config script installed by GTK could not be found
    *** If GTK was installed in PREFIX, make sure PREFIX/bin is in
    *** your path, or set the GTK_CONFIG environment variable to the
    *** full path to gtk-config.
    configure: error:
    The development files for GTK+ were not found. For GTK+ 2, please
    ensure that pkg-config is in the path and that gtk+-2.0.pc is
    installed. For GTK+ 1.2 please check that gtk-config is in the path,
    and that the version is 1.2.3 or above. Also check that the
    libraries returned by 'pkg-config gtk+-2.0 --libs' or 'gtk-config
    --libs' are in the LD_LIBRARY_PATH or equivalent.
   
    Error running configure
    ERROR: failed building wxWidgets
    Traceback (most recent call last):
      File "build.py", line 1188, in cmd_build_wx
        wxbuild.main(wxDir(), build_options)
      File "/tmp/pip-f7j6kdb0-build/buildtools/build_wxwidgets.py", line 368, in main
        "Error running configure")
      File "/tmp/pip-f7j6kdb0-build/buildtools/build_wxwidgets.py", line 85, in exitIfError
        raise builder.BuildError(msg)
    buildtools.builder.BuildError: Error running configure
    Finished command: build_wx (0m5.233s)
    Finished command: build (0m5.233s)
    Command '"/usr/bin/python3" -u build.py build' failed with exit code 1.
   
    ----------------------------------------
Command "/usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-f7j6kdb0-build/setup.py';exec(compile(getattr(tokenize, 'open', open)(__file__).read().replace('\r\n', '\n'), __file__, 'exec'))" install --record /tmp/pip-n5fq0woe-record/install-record.txt --single-version-externally-managed --compile" failed with error code 1 in /tmp/pip-f7j6kdb0-build/
You are using pip version 8.1.2, however version 9.0.1 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.
valerius@undead711:~/Downloads$ cd ~
valerius@undead711:~$ pip install --upgrade pip
Collecting pip
  Using cached pip-9.0.1-py2.py3-none-any.whl
Installing collected packages: pip
  Found existing installation: pip 8.1.2
    Uninstalling pip-8.1.2:
      Successfully uninstalled pip-8.1.2
  Rolling back uninstall of pip
Exception:
Traceback (most recent call last):
  File "/home/valerius/.local/lib/python3.5/site-packages/pip/basecommand.py", line 215, in main
    status = self.run(options, args)
  File "/home/valerius/.local/lib/python3.5/site-packages/pip/commands/install.py", line 317, in run
    prefix=options.prefix_path,
  File "/home/valerius/.local/lib/python3.5/site-packages/pip/req/req_set.py", line 742, in install
    **kwargs
  File "/home/valerius/.local/lib/python3.5/site-packages/pip/req/req_install.py", line 831, in install
    self.move_wheel_files(self.source_dir, root=root, prefix=prefix)
  File "/home/valerius/.local/lib/python3.5/site-packages/pip/req/req_install.py", line 1032, in move_wheel_files
    isolated=self.isolated,
  File "/home/valerius/.local/lib/python3.5/site-packages/pip/wheel.py", line 346, in move_wheel_files
    clobber(source, lib_dir, True)
  File "/home/valerius/.local/lib/python3.5/site-packages/pip/wheel.py", line 317, in clobber
    ensure_dir(destdir)
  File "/home/valerius/.local/lib/python3.5/site-packages/pip/utils/__init__.py", line 83, in ensure_dir
    os.makedirs(path)
  File "/usr/lib/python3.5/os.py", line 241, in makedirs
    mkdir(name, mode)
PermissionError: [Errno 13] Permission denied: '/usr/local/lib/python3.5/dist-packages/pip-9.0.1.dist-info'
You are using pip version 8.1.2, however version 9.0.1 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.
valerius@undead711:~$