HP LaserJet P1102w

[bebe]

собсно купил принтер... подрубил по вай фаю его к роутеру....из винды все пашет, а вот Ubuntu даже после установки последнего HPLIP 3.10.9 все равно не отправляет задания на печать..... пишет что не может сконектится с девайсом...хотя обнаруживает и драва устанавливает корректно вроде бы....может кто сталкивался или знает где копать?

[sanb]

в помощнике подключений HPLIP на первом этапе "Тип подключения"  выбрать второй пункт Network/Ethernet/Wireless network (direct connection or JetDirect) и ниже в выпадающем меню расширенных настроек вручную указать IP адрес принтера

[bebe]

спасибо огромное..заработало

[Danil_zver]

Тоже купил такое. Щас качаю hplip.
Вопрос такой. Можно ли настроить вайфай через Ubuntu? Или нужно настраивать всё в винде через usb, а затем работать в убунте?

[Aeooe]

Господа-товарищи. Подсобите в проблеме с принтером. Отказывается заводиться на Xubuntu 12,04 вот лог цупса:

(Нажмите, чтобы показать/скрыть)

E [19/Dec/2012:09:04:09 +0400] Unknown directive SystemGroup on line 4 of /etc/cups/cupsd.conf.
E [19/Dec/2012:09:04:09 +0400] Unknown directive JobPrivateAccess on line 88 of /etc/cups/cupsd.conf.
E [19/Dec/2012:09:04:09 +0400] Unknown directive JobPrivateValues on line 89 of /etc/cups/cupsd.conf.
E [19/Dec/2012:09:04:09 +0400] Unknown directive SubscriptionPrivateAccess on line 90 of /etc/cups/cupsd.conf.
E [19/Dec/2012:09:04:09 +0400] Unknown directive SubscriptionPrivateValues on line 91 of /etc/cups/cupsd.conf.
W [19/Dec/2012:09:04:15 +0400] failed to CreateProfile: org.freedesktop.DBus.Error.NoReply:Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
W [19/Dec/2012:09:04:20 +0400] failed to CreateDevice: org.freedesktop.DBus.Error.NoReply:Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
W [19/Dec/2012:09:04:22 +0400] failed to AddProfile: org.freedesktop.ColorManager.Failed:profile object path '/org/freedesktop/ColorManager/profiles/HP_LaserJet_P2055_Gray__' has already been added
E [19/Dec/2012:09:13:18 +0400] [Job 181] Job stopped due to filter errors; please consult the error_log file for details.
D [19/Dec/2012:09:13:18 +0400] [Job 181] The following messages were recorded from 09:13:12 to 09:13:18
D [19/Dec/2012:09:13:18 +0400] [Job 181] Adding start banner page "none".
D [19/Dec/2012:09:13:18 +0400] [Job 181] Adding end banner page "none".
D [19/Dec/2012:09:13:18 +0400] [Job 181] File of type application/postscript queued by "andrey".
D [19/Dec/2012:09:13:18 +0400] [Job 181] hold_until=0
D [19/Dec/2012:09:13:18 +0400] [Job 181] Queued on "HP-LaserJet-Professional-p1102w" by "andrey".
D [19/Dec/2012:09:13:18 +0400] [Job 181] job-sheets=none,none
D [19/Dec/2012:09:13:18 +0400] [Job 181] argv[0]="HP-LaserJet-Professional-p1102w"
D [19/Dec/2012:09:13:18 +0400] [Job 181] argv[1]="181"
D [19/Dec/2012:09:13:18 +0400] [Job 181] argv[2]="andrey"
D [19/Dec/2012:09:13:18 +0400] [Job 181] argv[3]="Test Page"
D [19/Dec/2012:09:13:18 +0400] [Job 181] argv[4]="1"
D [19/Dec/2012:09:13:18 +0400] [Job 181] argv[5]="PageSize=A4 job-uuid=urn:uuid:c532a20b-b4e6-35df-6984-5dfcf1aa441f job-originating-host-name=localhost time-at-creation=1355893992 time-at-processing=1355893992 AP_D_InputSlot="
D [19/Dec/2012:09:13:18 +0400] [Job 181] argv[6]="/var/spool/cups/d00181-001"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc-root"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[8]="HOME=/var/spool/cups/tmp"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[10]="SERVER_ADMIN=root@andrey-System-Product-Name"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[11]="SOFTWARE=CUPS/1.5.0"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[13]="USER=root"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[14]="CUPS_SERVER=/var/run/cups/cups.sock"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[15]="CUPS_ENCRYPTION=IfRequested"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[16]="IPP_PORT=631"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[17]="CHARSET=utf-8"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[18]="LANG=ru_RU.UTF-8"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[19]="PPD=/etc/cups/ppd/HP-LaserJet-Professional-p1102w.ppd"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[20]="RIP_MAX_CACHE=128m"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[21]="CONTENT_TYPE=application/postscript"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[22]="DEVICE_URI=socket://192.168.0.107:9100"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[23]="PRINTER_INFO=HP LaserJet Professional p1102w"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[24]="PRINTER_LOCATION="
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[25]="PRINTER=HP-LaserJet-Professional-p1102w"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[26]="PRINTER_STATE_REASONS=hplip.plugin-error"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[27]="CUPS_FILETYPE=document"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[28]="FINAL_CONTENT_TYPE=printer/HP-LaserJet-Professional-p1102w"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[29]="AUTH_I****"
D [19/Dec/2012:09:13:18 +0400] [Job 181] Started filter /usr/lib/cups/filter/pstopdf (PID 2502)
D [19/Dec/2012:09:13:18 +0400] [Job 181] Started filter /usr/lib/cups/filter/pdftopdf (PID 2503)
D [19/Dec/2012:09:13:18 +0400] [Job 181] Started filter /usr/lib/cups/filter/gstoraster (PID 2504)
D [19/Dec/2012:09:13:18 +0400] [Job 181] Started filter /usr/lib/cups/filter/hpcups (PID 2505)
D [19/Dec/2012:09:13:18 +0400] [Job 181] Started backend /usr/lib/cups/backend/socket (PID 2506)
D [19/Dec/2012:09:13:18 +0400] [Job 181] pstopdf 6 args: 181 andrey Test Page 1 PageSize=A4 job-uuid=urn:uuid:c532a20b-b4e6-35df-6984-5dfcf1aa441f job-originating-host-name=localhost time-at-creation=1355893992 time-at-processing=1355893992 AP_D_InputSlot= /var/spool/cups/d00181-001
D [19/Dec/2012:09:13:18 +0400] [Job 181] PPD: /etc/cups/ppd/HP-LaserJet-Professional-p1102w.ppd
D [19/Dec/2012:09:13:18 +0400] [Job 181] Resolution:
D [19/Dec/2012:09:13:18 +0400] [Job 181] Page size: A4
D [19/Dec/2012:09:13:18 +0400] [Job 181] Width: 595.440002441406, height: 841.679992675781, absolute margins: 18, 15.5, 577.440002441406, 826.179992675781
D [19/Dec/2012:09:13:18 +0400] [Job 181] Relative margins: 18, 15.5, 18.000000000000, 15.500000000000
D [19/Dec/2012:09:13:18 +0400] [Job 181] PPD options: -dDEVICEWIDTHPOINTS=595.440002441406 -dDEVICEHEIGHTPOINTS=841.679992675781
D [19/Dec/2012:09:13:18 +0400] [Job 181] PostScript to be injected:
D [19/Dec/2012:09:13:18 +0400] [Job 181] STATE: +connecting-to-device
D [19/Dec/2012:09:13:18 +0400] [Job 181] Looking up "192.168.0.107"...
D [19/Dec/2012:09:13:18 +0400] [Job 181] hrDeviceDesc="HP LaserJet Professional P 1102w"
D [19/Dec/2012:09:13:18 +0400] [Job 181] prtGeneralCurrentLocalization type is 5, expected 2!
D [19/Dec/2012:09:13:18 +0400] [Job 181] backendWaitLoop(snmp_fd=5, addr=0x21bb98e4, side_cb=0x390370)
D [19/Dec/2012:09:13:18 +0400] [Job 181] Running cat | /usr/bin/gs -q -dNOPAUSE -dBATCH -sDEVICE=pdfwrite -dCompatibilityLevel=1.3 -dAutoRotatePages=/None -dAutoFilterColorImages=false                -dNOPLATFONTS -dPARANOIDSAFER -dNOINTERPOLATE -sstdout=%stderr -dColorImageFilter=/FlateEncode                 -dPDFSETTINGS=/printer                 -dColorConversionStrategy=/LeaveColorUnchanged -dDoNumCopies -dDEVICEWIDTHPOINTS=595.440002441406 -dDEVICEHEIGHTPOINTS=841.679992675781 -sOutputFile=-  -c .setpdfwrite -f -
D [19/Dec/2012:09:13:18 +0400] [Job 181] PPD uses qualifier 'Gray.Plain.'
D [19/Dec/2012:09:13:18 +0400] [Job 181] Calling FindDeviceById(HP-LaserJet-Professional-p1102w)
D [19/Dec/2012:09:13:18 +0400] [Job 181] Failed to send: org.freedesktop.DBus.Error.AccessDenied:Rejected send message, 1 matched rules; type="method_call", sender=":1.48" (uid=7 pid=2504 comm="HP-LaserJet-Professional-p1102w 181 andrey Test Pa") interface="org.freedesktop.ColorManager" member="FindDeviceById" error name="(unset)" requested_reply="0" destination="org.freedesktop.ColorManager" (uid=102 pid=880 comm="/usr/lib/i386-linux-gnu/colord/colord ")
D [19/Dec/2012:09:13:18 +0400] [Job 181] Failed to get profile filename!
D [19/Dec/2012:09:13:18 +0400] [Job 181] no profiles specified in PPD
D [19/Dec/2012:09:13:18 +0400] [Job 181] Set job-printer-state-message to "no profiles specified in PPD", current level=INFO
D [19/Dec/2012:09:13:18 +0400] [Job 181] Ghostscript command line: /usr/bin/gs -dQUIET -dPARANOIDSAFER -dNOPAUSE -dBATCH -dNOINTERPOLATE -sDEVICE=cups -sstdout=%stderr -sOutputFile=%stdout -sMediaType=Plain -sOutputType=0 -r600x600 -dMediaPosition=7 -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=841 -dcupsBitsPerColor=1 -dcupsColorOrder=0 -dcupsColorSpace=3 -dcupsRowCount=1 -dcupsRowStep=2 -dcupsInteger0=9 -scupsPageSizeName=A4 -I/usr/share/cups/fonts -c -f -_
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc-root"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[8]="HOME=/var/spool/cups/tmp"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[10]="SERVER_ADMIN=root@andrey-System-Product-Name"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[11]="SOFTWARE=CUPS/1.5.0"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[12]="USER=root"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[13]="CUPS_SERVER=/var/run/cups/cups.sock"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[14]="CUPS_ENCRYPTION=IfRequested"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[15]="IPP_PORT=631"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[16]="CHARSET=utf-8"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[17]="LANG=ru_RU.UTF-8"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[18]="PPD=/etc/cups/ppd/HP-LaserJet-Professional-p1102w.ppd"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[19]="RIP_MAX_CACHE=128m"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[20]="CONTENT_TYPE=application/postscript"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[21]="DEVICE_URI=socket://192.168.0.107:9100"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[22]="PRINTER_INFO=HP LaserJet Professional p1102w"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[23]="PRINTER_LOCATION="
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[24]="PRINTER=HP-LaserJet-Professional-p1102w"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[25]="PRINTER_STATE_REASONS=hplip.plugin-error"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[26]="CUPS_FILETYPE=document"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[27]="FINAL_CONTENT_TYPE=printer/HP-LaserJet-Professional-p1102w"
D [19/Dec/2012:09:13:18 +0400] [Job 181] envp[28]="AUTH_INFO_REQUIRED=none"
D [19/Dec/2012:09:13:18 +0400] [Job 181] Start rendering...
D [19/Dec/2012:09:13:18 +0400] [Job 181] Set job-printer-state-message to "Start rendering...", current level=INFO
D [19/Dec/2012:09:13:18 +0400] [Job 181] Processing page 1...
D [19/Dec/2012:09:13:18 +0400] [Job 181] Set job-printer-state-message to "Processing page 1...", current level=INFO
D [19/Dec/2012:09:13:18 +0400] [Job 181] Connecting to 192.168.0.107:9100
D [19/Dec/2012:09:13:18 +0400] [Job 181] Connecting to printer.
D [19/Dec/2012:09:13:18 +0400] [Job 181] Set job-printer-state-message to "Connecting to printer.", current level=INFO
D [19/Dec/2012:09:13:18 +0400] [Job 181] STATE: -connecting-to-device
D [19/Dec/2012:09:13:18 +0400] [Job 181] Connected to printer.
D [19/Dec/2012:09:13:18 +0400] [Job 181] Set job-printer-state-message to "Connected to printer.", current level=INFO
D [19/Dec/2012:09:13:18 +0400] [Job 181] Connected to 192.168.0.107:9100...
D [19/Dec/2012:09:13:18 +0400] [Job 181] backendRunLoop(print_fd=0, device_fd=6, snmp_fd=5, addr=0x21bb98e4, use_bc=1, side_cb=0x390370)
D [19/Dec/2012:09:13:18 +0400] [Job 181] STATE: +hplip.plugin-error
D [19/Dec/2012:09:13:18 +0400] [Job 181] prnt/hpcups/HPCupsFilter.cpp 418: m_Job initialization failed with error = 48DEBUG: Read 16 bytes of print data...
D [19/Dec/2012:09:13:18 +0400] [Job 181] Wrote 16 bytes of print data...
D [19/Dec/2012:09:13:18 +0400] [Job 181] Waiting for printer to finish.
D [19/Dec/2012:09:13:18 +0400] [Job 181] Ready to print.
D [19/Dec/2012:09:13:18 +0400] [Job 181] End of messages
D [19/Dec/2012:09:13:18 +0400] [Job 181] printer-state=3(idle)
D [19/Dec/2012:09:13:18 +0400] [Job 181] printer-state-message="Ready to print."
D [19/Dec/2012:09:13:18 +0400] [Job 181] printer-state-reasons=hplip.plugin-error

Установка принтера проходит без нареканий, а вот тестовую страницу не печатает. Сам из лога мало что понял. Видима код ошибки "m_Job initialization failed with error = 48DEBUG:".
Пользователь решил продолжить мысль 19 Декабря 2012, 10:37:32:Видимо ошибка из-за отсутсвия плагина hp-plugin. При попытке установить принтер запрашивается установка этого плагина в 2 режимах: из инета и из файла. Но т.к. у меня Инет через прокси - коннект не происходит. Найти установочный файл для этого плагина не удалось. Подсобите как выйти из положения?