Форум русскоязычного сообщества Ubuntu


Увидели сообщение с непонятной ссылкой, спам, непристойность или оскорбление?
Воспользуйтесь ссылкой «Сообщить модератору» рядом с сообщением!

Автор Тема: Сеть между Ubuntu и Windows XP  (Прочитано 16109 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Оффлайн alex-v

  • Автор темы
  • Участник
  • *
  • Сообщений: 123
    • Просмотр профиля
Сеть между Ubuntu и Windows XP
« : 16 Сентября 2009, 22:44:33 »
Карточки настроены правильно на обоих компах, IP прописаны правильно... Из под Убунты вижу виндошный комп, а из под винды не видно убунтовского компа. Почему?
И где в Убунте прописывается сетевое имя компа и рабочая группа?
С Богом. Александр.

Оффлайн AnrDaemon

  • Заслуженный пользователь
  • Старожил
  • *
  • Сообщений: 28358
    • Просмотр профиля
Re: Сеть между Ubuntu и Windows XP
« Ответ #1 : 17 Сентября 2009, 00:12:04 »
man smb.conf
Хотите получить помощь? Потрудитесь представить запрошенную информацию в полном объёме.

Прежде чем [Отправить], нажми [Просмотр] и прочти собственное сообщение. Сам-то понял, что написал?…

Оффлайн alex-v

  • Автор темы
  • Участник
  • *
  • Сообщений: 123
    • Просмотр профиля
Re: Сеть между Ubuntu и Windows XP
« Ответ #2 : 17 Сентября 2009, 12:34:41 »
спасибо, мне предложили настраивать самбу через гуи "system-config-samba". Очень удобно.
С Богом. Александр.

Оффлайн Dec

  • Участник
  • *
  • Сообщений: 123
    • Просмотр профиля
Re: Сеть между Ubuntu и Windows XP
« Ответ #3 : 17 Сентября 2009, 12:40:24 »
Я и из под винды и Ubuntu не вижу компов, с Ubuntu видно только если в Gnome Commander установить соединение с типом Windows Share и то оно слетает после перезагрузки.

Оффлайн alex-v

  • Автор темы
  • Участник
  • *
  • Сообщений: 123
    • Просмотр профиля
Re: Сеть между Ubuntu и Windows XP
« Ответ #4 : 17 Сентября 2009, 12:55:31 »
после установки и настройки самбы теперь все наоборот: Windows видит убунтовский комп, а Ubuntu не видит виндошный. Говорит "Не удалось присоеденить местоположение. Не удалось получить список доступных на сервере ресурсов".

Как это решить?
« Последнее редактирование: 17 Сентября 2009, 13:17:34 от alex-v »
С Богом. Александр.

Оффлайн VinnyPooh

  • Почётный модератор
  • Старожил
  • *
  • Сообщений: 2577
  • В работе
    • Просмотр профиля
    • Linux для чайников (пых-пых)
Re: Сеть между Ubuntu и Windows XP
« Ответ #5 : 17 Сентября 2009, 13:00:52 »
/etc/hosts

Пропиши туда IP адрес компа с Windows и его имя.

Оффлайн alex-v

  • Автор темы
  • Участник
  • *
  • Сообщений: 123
    • Просмотр профиля
Re: Сеть между Ubuntu и Windows XP
« Ответ #6 : 17 Сентября 2009, 13:23:39 »
/etc/hosts

Пропиши туда IP адрес компа с Windows и его имя.
Не помогло.
Причем комп с виндой пингуется нормально...  но Ubuntu его не видит...
В чем же дело?
С Богом. Александр.

Оффлайн VinnyPooh

  • Почётный модератор
  • Старожил
  • *
  • Сообщений: 2577
  • В работе
    • Просмотр профиля
    • Linux для чайников (пых-пых)
Re: Сеть между Ubuntu и Windows XP
« Ответ #7 : 17 Сентября 2009, 13:25:27 »
настройки свои сетевые покажи

команда ifconfig в терминале и файл

/etc/network/interfaces

Пользователь решил продолжить мысль 17 Сентября 2009, 13:29:58:
И ещё
попробуй в терминале задать smbclient -L 192.168.0.3
ну IP адрес понятно, свой и приведи вывод сюда
Аналогично попробуй по имени компа.
« Последнее редактирование: 17 Сентября 2009, 13:29:58 от VinnyPooh »

Оффлайн alex-v

  • Автор темы
  • Участник
  • *
  • Сообщений: 123
    • Просмотр профиля
Re: Сеть между Ubuntu и Windows XP
« Ответ #8 : 17 Сентября 2009, 13:31:11 »
Карточка настроена нормально (я считаю), Windows же видит убунтовский комп, да и перед установкой самбы и убунтовский комп видел виндошный, а сейчас не хочет.
Но вот всетаки инфа, если интересно:

alex-v@alex-v-desktop:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:1b:b9:c9:37:55 
          inet addr:192.168.1.3  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::21b:b9ff:fec9:3755/64 Диапазон:Ссылка
          ВВЕРХ BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1831 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2249 errors:0 dropped:0 overruns:0 carrier:0
          коллизии:0 txqueuelen:1000
          RX bytes:1039310 (1.0 MB)  TX bytes:546936 (546.9 KB)
          Прервано:252 Base address:0xe000

ppp0      Link encap:Протокол PPP (Point-to-Point Protocol) 
          inet addr:93.85.13.37  P-t-P:86.57.160.24  Mask:255.255.255.255
          ВВЕРХ POINTOPOINT RUNNING NOARP MULTICAST  MTU:1492  Metric:1
          RX packets:1705 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2027 errors:0 dropped:0 overruns:0 carrier:0
          коллизии:0 txqueuelen:3
          RX bytes:993489 (993.4 KB)  TX bytes:472322 (472.3 KB)



/etc/network/interfaces

auto eth0
iface eth0 inet static
address 192.168.1.3
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1

auto dsl-provider
iface dsl-provider inet ppp
pre-up /sbin/ifconfig eth0 up # line maintained by pppoeconf
provider dsl-provider

Пользователь решил продолжить мысль 17 Сентября 2009, 13:33:35:
alex-v@alex-v-desktop:~$ smbclient -L 192.168.1.3
timeout connecting to 192.168.1.3:445
timeout connecting to 192.168.1.3:139
Connection to 192.168.1.3 failed (Error NT_STATUS_ACCESS_DENIED)
« Последнее редактирование: 17 Сентября 2009, 13:33:35 от alex-v »
С Богом. Александр.

Оффлайн VinnyPooh

  • Почётный модератор
  • Старожил
  • *
  • Сообщений: 2577
  • В работе
    • Просмотр профиля
    • Linux для чайников (пых-пых)
Re: Сеть между Ubuntu и Windows XP
« Ответ #9 : 17 Сентября 2009, 13:34:48 »
У тебя с этого же компа подымается интернет-соединение?
А второй комп каким образом прицеплен.
Ну и всё же "И ещё
попробуй в терминале задать smbclient -L 192.168.0.3
ну IP адрес понятно, свой и приведи вывод сюда
Аналогично попробуй по имени компа."

Пользователь решил продолжить мысль 17 Сентября 2009, 11:36:51:
Или шара закрыта или комп всё же не пингуется?

Попингуй комп отдельно в терминале по IP адресу. Смахивает на проблемы с маршрутизацией и всё же как подцеплен 2 комп.

ль 17 Сентября 2009, 11:33:35:[/b][/size]
alex-v@alex-v-desktop:~$ smbclient -L 192.168.1.3
timeout connecting to 192.168.1.3:445
timeout connecting to 192.168.1.3:139
Connection to 192.168.1.3 failed (Error NT_STATUS_ACCESS_DENIED)


Ну и кинь глянуть в догонку конфиг самбы
« Последнее редактирование: 17 Сентября 2009, 13:39:56 от VinnyPooh »

Оффлайн alex-v

  • Автор темы
  • Участник
  • *
  • Сообщений: 123
    • Просмотр профиля
Re: Сеть между Ubuntu и Windows XP
« Ответ #10 : 17 Сентября 2009, 13:39:24 »
пропинговал виндошеый комп - все ОК (пакеты проходят)
а вот мой убунтовский не пингуется
С Богом. Александр.

Оффлайн VinnyPooh

  • Почётный модератор
  • Старожил
  • *
  • Сообщений: 2577
  • В работе
    • Просмотр профиля
    • Linux для чайников (пых-пых)
Re: Сеть между Ubuntu и Windows XP
« Ответ #11 : 17 Сентября 2009, 13:41:06 »
Чего то я не пойму.

У тебя 2 компа связаны в сетку чем?

Оффлайн alex-v

  • Автор темы
  • Участник
  • *
  • Сообщений: 123
    • Просмотр профиля
Re: Сеть между Ubuntu и Windows XP
« Ответ #12 : 17 Сентября 2009, 13:42:59 »
модемом D-link 2540U со встроенным свичем на четыре порта
С Богом. Александр.

Оффлайн VinnyPooh

  • Почётный модератор
  • Старожил
  • *
  • Сообщений: 2577
  • В работе
    • Просмотр профиля
    • Linux для чайников (пых-пых)
Re: Сеть между Ubuntu и Windows XP
« Ответ #13 : 17 Сентября 2009, 13:45:13 »
Этот модем сам умеет подымать интернет-соединение?

Если умеет - то пусть сам подымает. Это раз. Это надо сделать.

Второе, где то косяк в настройках.
Зайди в Windows - в Пуск- Выполнить - CMD - ipconfig /all и сюда
надо настройки посмотреть.
ну и конфиг самбы тоже. Дело скорее всего в маршрутизации.
« Последнее редактирование: 17 Сентября 2009, 13:47:50 от VinnyPooh »

Оффлайн alex-v

  • Автор темы
  • Участник
  • *
  • Сообщений: 123
    • Просмотр профиля
Re: Сеть между Ubuntu и Windows XP
« Ответ #14 : 17 Сентября 2009, 14:07:07 »
C:\Documents and Settings\Администратор>ipconfig /all



Настройка протокола IP для Windows



        Имя компьютера  . . . . . . . . . : comp2

        Основной DNS-суффикс  . . . . . . :

        Тип узла. . . . . . . . . . . . . : неизвестный

        IP-маршрутизация включена . . . . : нет

        WINS-прокси включен . . . . . . . : нет



Подключение по локальной сети - Ethernet адаптер:



        DNS-суффикс этого подключения . . :

        Описание  . . . . . . . . . . . . : NVIDIA nForce Networking Controller

        Физический адрес. . . . . . . . . : 00-14-2A-56-78-BE

        Dhcp включен. . . . . . . . . . . : нет

        IP-адрес  . . . . . . . . . . . . : 192.168.1.7

        Маска подсети . . . . . . . . . . : 255.255.255.0

        Основной шлюз . . . . . . . . . . : 192.168.1.1

        DNS-серверы . . . . . . . . . . . : 194.158.202.57

                                            163.232.248.2

smb.conf

#======================= Global Settings =======================
[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = Home

# server string is the equivalent of the NT Description field
   server string = %h server (Samba, Ubuntu)

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
#   security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
;   encrypt passwords = yes

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using. 
   passdb backend = tdbsam

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe. 
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe. 
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
#   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
#   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
#   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
;   winbind enum groups = yes
;   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes
   username map = /etc/samba/smbusers
   security = user
;   guest ok = no
;   guest account = nobody

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares.  This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.  Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes
;   share modes = no

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
;   guest ok = no
;   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
;   browseable = yes
   writeable = yes
   valid users = alex-v, nobody
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   read only = yes
;   locking = no
;   path = /cdrom
;   guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
#   cdrom share is accesed. For this to work /etc/fstab must contain
#   an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
#   is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom

[temp]
   path = /home/alex-v/temp
   writeable = yes
;   browseable = yes
   guest ok = yes
С Богом. Александр.

 

Страница сгенерирована за 0.056 секунд. Запросов: 23.