Сбор пожертвований на сервер для UBUNTU.RU
0 Пользователей и 1 Гость просматривают эту тему.
... grub initrd.img-4.13.0-41-generic System.map-4.13.0-43-genericinitrd.img-4.13.0-43-generic vmlinuz-4.13.0-41-genericlost+found vmlinuz-4.13.0-43-genericmemtest86+.bin
sudo vmware-modconfig --console --install-all
systemctl cat vmware.servicels /etc/init.d/
# /run/systemd/generator.late/vmware.service# Automatically generated by systemd-sysv-generator[Unit]Documentation=man:systemd-sysv-generator(8)SourcePath=/etc/init.d/vmwareDescription=LSB: This service starts and stops VMware servicesBefore=multi-user.targetBefore=multi-user.targetBefore=multi-user.targetBefore=shutdown.targetAfter=network-online.targetAfter=systemd-journald-dev-log.socketWants=network-online.targetConflicts=shutdown.target[Service]Type=forkingRestart=noTimeoutSec=5minIgnoreSIGPIPE=noKillMode=processGuessMainPID=noRemainAfterExit=yesExecStart=/etc/init.d/vmware startExecStop=/etc/init.d/vmware stop
acpid checkroot-bootclean.sh gdm3 lightdm nmbd reboot smbd virtualboxalsa-utils checkroot.sh grub-common lm-sensors ondemand resolvconf speech-dispatcher vmwareanacron chrome-remote-desktop halt mountall-bootclean.sh plymouth rpcbind thermald vmware-USBArbitratorapparmor console-setup hddtemp mountall.sh plymouth-log rsync udev whoopsieapport cron hostname.sh mountdevsubfs.sh pppd-dns rsyslog ufw winbindavahi-daemon cryptdisks hwclock.sh mountkernfs.sh procps samba umountfs x11-commonbinfmt-support cryptdisks-early irqbalance mountnfs-bootclean.sh qemu-kvm samba-ad-dc umountnfs.shbluetooth cups kerneloops mountnfs.sh rc saned umountrootbootmisc.sh cups-browsed keyboard-setup networking rc.local sendsigs unattended-upgradesbrltty dbus killprocs network-manager rcS single urandomcheckfs.sh fancontrol kmod nfs-kernel-server README skeleton uuidd
cat /etc/init.d/vmware
#!/usr/bin/env bash## Copyright 1998-2008 VMware, Inc. All rights reserved.## This script manages the services needed to run VMware software.#### BEGIN INIT INFO# Provides: vmware# Required-Start: $network $syslog# Required-Stop: $network $syslog# X-Start-Before: # X-Stop-After: # Default-Start: 2 3 4# Default-Stop: 0 6# Short-Description: This service starts and stops VMware services### END INIT INFOETCDIR=/etc/vmware. $ETCDIR/bootstraplibdir="$LIBDIR"/vmware. "$libdir"/scripts/util.shload_settings "$libdir" || exit 1VNETLIB_LOG=/var/log/vnetlibPRODUCT_NAME="vmware-vmx"COMPONENT_NAME="vmware-vmx"# This comment is a hack to prevent RedHat distributions from outputing# "Starting <basename of this script>" when running this startup script.# We just need to write the word daemon followed by a space# This defines echo_success() and echo_failure() on RedHatif [ -r "$INITSCRIPTDIR"'/functions' ]; then . "$INITSCRIPTDIR"'/functions'fi# This defines $rc_done and $rc_failed on S.u.S.E.if [ -f /etc/rc.config ]; then # Don't include the entire file: there could be conflicts rc_done=`(. /etc/rc.config; echo "$rc_done")` rc_failed=`(. /etc/rc.config; echo "$rc_failed")`else # Make sure the ESC byte is literal: Ash does not support echo -e rc_done=' done' rc_failed=' failed'fisubsys=vmwaredriver=vmmonvnet=vmnetvmblock=vmblockvmci=vmcivmci_alias='pci:v000015ADd00000740sv*sd*bc*sc*i*'vmhgfs=vmhgfsvsock=vsockvsock_alias=vmware_vsockvmciNode=vmcivsockNode=vsock# SHM settingsshmmaxPath=/proc/sys/kernel/shmmaxshmmaxMinValue=268435456 # 256MB## Are we running in a VM?#vmwareInVM() { "$BINDIR"/checkvm >/dev/null 2>&1}## Report a positive number if there are any VMs running.# May not be the actual vmmon reference count.#vmmonUseCount() { local count # Beware of module dependencies here. An exact match is important count=`/sbin/lsmod | awk 'BEGIN {n = 0} {if ($1 == "'"$driver"'") n = $3} END {print n}'` # If CONFIG_MODULE_UNLOAD is not set in the kernel, lsmod prints '-' instead of the # reference count, so ask vmrun, or if we don't have vmrun, look for running vmx processes if [ x${count} = "x-" ] then type vmrun > /dev/null 2>&1 if [ $? -eq 0 ] then count=`vmrun list | awk 'BEGIN {n=0} /^Total running VMs:/ {n = $4} END {print n}'` else count=`ps -afe | grep "/bin/vmware-vmx" | grep -v grep | wc -l` fi fi echo $count}# Is a given module loaded?isLoaded() { local module="$1" /sbin/lsmod | awk 'BEGIN {n = "no";} {if ($1 == "'"$module"'") n = "yes";} END {print n;}'}# Build a Linux kernel integer versionkernelVersionInteger() { echo $(((($1 * 256) + $2) * 256 + $3))}# Get the running kernel integer versiongetVersionInteger() { local version_uts local v1 local v2 local v3 version_uts=`uname -r` # There is no double quote around the back-quoted expression on purpose # There is no double quote around $version_uts on purpose set -- `IFS='.'; echo $version_uts` v1="$1" v2="$2" v3="$3" # There is no double quote around the back-quoted expression on purpose # There is no double quote around $v3 on purpose set -- `IFS='-ABCDEFGHIJKLMNOPQRSTUVWXYZ_abcdefghijklmnopqrstuvwxyz'; echo $v3` v3="$1" kernelVersionInteger "$v1" "$v2" "$v3"}vmwareLoadModule() { /sbin/modprobe "$1" || exit 1}vmwareUnloadModule() { [ "`isLoaded "$1"`" = 'no' ] && return 0 # if we ran depmod after removing the modules modprobe -r will not work: /sbin/modprobe -r "$1" || /sbin/rmmod $1 || exit 1}# Start the virtual machine monitor kernel servicevmwareStartVmmon() { vmwareLoadModule $driver}# Stop the virtual machine monitor kernel servicevmwareStopVmmon() { vmwareUnloadModule $driver}# Start the virtual ethernet kernel servicevmwareStartVmnet() { vmwareLoadModule $vnet "$BINDIR"/vmware-networks --start >> $VNETLIB_LOG 2>&1}# Stop the virtual ethernet kernel servicevmwareStopVmnet() { "$BINDIR"/vmware-networks --stop >> $VNETLIB_LOG 2>&1 vmwareUnloadModule $vnet}# Returns 0 if networking is enabled, otherwise 1vmwareIsNetworkingEnabled() { [ "$vmdb_NETWORKING" = 'yes' ] return}vmwareRealModName() { # modprobe might be old and not understand the -R option, or # there might not be an alias. In both cases we assume # that the module is not upstreamed. mod=$1 mod_alias=$2 alias_file="/lib/modules/$(uname -r)/modules.alias" modname=$(/sbin/modprobe -R ${mod_alias} 2>/dev/null) if [ $? = 0 -a "$modname" != "" ] ; then echo $modname elif grep -F ${mod_alias} ${alias_file} >/dev/null 2>&1 ; then echo $(grep -F ${mod_alias} ${alias_file} | awk '{print $3}') else echo $mod fi}# Start the virtual machine communication interface kernel servicevmwareStartVmci() { mod=$(vmwareRealModName $vmci $vmci_alias) # only load vmci if it's not already loaded if [ "`isLoaded "$mod"`" = 'no' ]; then vmwareLoadModule "$mod" fi vmware_rm_stale_node "$vmciNode" if [ ! -e "/dev/$vmciNode" ]; then local minor=`cat /proc/misc | grep $vmciNode | awk '{print $1}'` mknod --mode=666 "/dev/$vmciNode" c 10 "$minor" else chmod 666 "/dev/$vmciNode" fi return 0}# Make sure the system has enough shared memory available to cover shmmaxMinValue.# To handle overflow/wrapping, check that shmmax is greater than 1 since any overflow# will make shmmax look negative. At least until shmmax or shmmaxMinValue wrap around# again.vmwareCheckSharedMemory() { if [ -f "$shmmaxPath" ]; then shmmax=`cat $shmmaxPath` # Account for numbers that are too large that they wrap around and alias # to a smaller number or they are outright set to -1. If "1 < XXXX" fails # then the XXX value is # out of bounds. The only acceptable combo is that # both values satisfy that condition, else report that the max value the # system supports may not satisfy this programs requirements. if (( $shmmax < 1 )) || (( $shmmaxMinValue < 1 )) \ || (( $shmmax < $shmmaxMinValue )) ; then echo "$shmmaxMinValue" > "$shmmaxPath" echo "" echo "Setting the max shared memory the system will allow to $shmmaxMinValue." echo "" fi fi return 0}# Stop the virtual machine communication interface kernel servicevmwareStopVmci() { # Hosted now has to interface with Tools. vmhgfs could possibly be loaded, which # will interfere with the removal of vmci. Only unload it if it's already # loaded. if [ "`isLoaded "$vmhgfs"`" = 'yes' ]; then vmwareUnloadModule "$vmhgfs" fi mod=$(vmwareRealModName $vmci $vmci_alias) # only unload vmci if it's already loaded if [ "`isLoaded "${mod}"`" = 'yes' ]; then vmwareUnloadModule "${mod}" fi rm -f "/dev/$vmciNode"}isVmciNeeded() { if [ "$vmdb_VMCI_CONFED" = 'yes' ]; then echo yes else echo no fi}# starts after vmci is loadedvmwareStartVsock() { mod=$(vmwareRealModName $vsock $vsock_alias) # only load vsock if it's not already loaded if [ "`isLoaded "$mod"`" = 'no' ]; then vmwareLoadModule "$mod" fi vmware_rm_stale_node "$vsockNode" # Give udev 5 seconds to create our node vmware_delay_for_node "/dev/$vsockNode" 5 if [ ! -e "/dev/$vsockNode" ]; then local minor=`cat /proc/misc | grep $vsockNode | awk '{print $1}'` mknod --mode=666 "/dev/$vsockNode" c 10 "$minor" else chmod 666 "/dev/$vsockNode" fi return 0}# unloads before vmcivmwareStopVsock() { mod=$(vmwareRealModName $vsock $vsock_alias) # only unload vsock if it's already loaded if [ "`isLoaded "$mod"`" = 'yes' ]; then vmwareUnloadModule "$mod" fi rm -f /dev/vsock}isVsockNeeded() { if [ "$vmdb_VSOCK_CONFED" = 'yes' ]; then echo yes else echo no fi}vmware_start_authdlauncher() { vmware_bg_exec "`vmware_product_name` Authentication Daemon" \ "$SBINDIR/vmware-authdlauncher"}vmware_stop_authdlauncher() { local launcherpid=`pidof vmware-authdlauncher` if [ -n "$launcherpid" ]; then vmware_synchrone_kill $launcherpid "TERM" fi}vmwareService() { case "$1" in start) if vmwareInVM; then # Refuse to start services in a VM: they are useless exit 1 fi echo 'Starting VMware services:' exitcode='0' vmware_exec 'Virtual machine monitor' vmwareStartVmmon exitcode=$(($exitcode + $?)) if [ "`isVmciNeeded`" = 'yes' ]; then vmware_exec 'Virtual machine communication interface' vmwareStartVmci exitcode=$(($exitcode + $?)) fi # vsock needs vmci started first if [ "`isVsockNeeded`" = 'yes' ]; then vmware_exec 'VM communication interface socket family' vmwareStartVsock # a vsock failure to load shouldn't cause the init to fail completely. fi if [ "`is_vmblock_needed`" = 'yes' ] ; then vmware_exec 'Blocking file system' vmware_start_vmblock exitcode=$(($exitcode + $?)) fi # Try to load parport_pc. /sbin/modprobe parport_pc >/dev/null 2>&1 if vmwareIsNetworkingEnabled; then vmware_exec 'Virtual ethernet' vmwareStartVmnet exitcode=$(($exitcode + $?)) fi vmware_exec 'VMware Authentication Daemon' vmware_start_authdlauncher if [ "$exitcode" -gt 0 ]; then exit 1 fi [ -d /var/lock/subsys ] || mkdir -p /var/lock/subsys touch /var/lock/subsys/"$subsys" vmware_exec "Shared Memory Available" vmwareCheckSharedMemory ;; stop) echo 'Stopping VMware services:' exitcode='0' vmware_exec 'VMware Authentication Daemon' vmware_stop_authdlauncher # If the 'K' version of this script is running, the system is # stoping services not because the user is running vmware-config.pl # or running the initscript directly but because the user wants to # shutdown. Suspend all VMs. if [ "`echo $BASENAME | sed -ne '/^K[0-9].vmware/p'`" ] ; then if [ -x "$BINDIR"/vmrun ] ; then for i in `pidof vmware-vmx` ; do "$BINDIR"/vmrun suspend `ps -p $i -f | \ sed -ne '/vmware/s/.* \(\/.*\.vmx\)/\1/p'` 2> /dev/null done fi fi if [ "`vmmonUseCount`" -gt 0 ]; then echo 'At least one instance of '"$PRODUCT_NAME"' is still running.' 1>&2 echo 'Please stop all running instances of '"$PRODUCT_NAME"' first.' 1>&2 echo " " >&2 # Since we stopped authdlauncher to prevent new connections before disabling # any vmxs, need to restart it here to restore the environment back to # what it was before this init script ran. vmware_exec 'VMware Authentication Daemon' vmware_start_authdlauncher # The unconfigurator handle this exit code differently exit 2 fi # vmci is used by vsock so the module can't unload until vsock does. if [ "`isVsockNeeded`" = 'yes' ]; then vmware_exec 'VM communication interface socket family' vmwareStopVsock exitcode=$(($exitcode + $?)) fi if [ "`isVmciNeeded`" = 'yes' ]; then vmware_exec 'Virtual machine communication interface' vmwareStopVmci exitcode=$(($exitcode + $?)) fi vmware_exec 'Virtual machine monitor' vmwareStopVmmon exitcode=$(($exitcode + $?)) if [ "`is_vmblock_needed`" = 'yes' ] ; then vmware_exec 'Blocking file system' vmware_stop_vmblock exitcode=$(($exitcode + $?)) fi # Try to unload parport_pc. Failure is allowed as it does not # exist on kernels 2.0, and some other process could be using # it. /sbin/modprobe -r parport_pc >/dev/null 2>&1 if vmwareIsNetworkingEnabled; then vmwareStopVmnet fi # The vmware and vmware-tray processes don't terminate automatically # when the other services are shutdown. They persist after calling # 'init.d/vmware stop' and will happily keep going through an init # start command, continuing to minimally function, blissfully ignorant. # Time for a buzzkill. for i in `pidof vmware vmware-tray` ; do vmware_synchrone_kill $i "INT" done if [ "$exitcode" -gt 0 ]; then exit 1 fi rm -f /var/lock/subsys/"$subsys" ;; status) if [ "`vmmonUseCount`" -gt 0 ]; then echo 'At least one instance of '"$PRODUCT_NAME"' is still running.' echo if [ "$2" = "vmcount" ]; then exit 2 fi fi if [ "$2" = "vmcount" ]; then exit 0 fi exitcode='0' echo -n "Module $driver " [ "`isLoaded "$driver"`" = 'yes' ] && echo loaded || echo "not loaded" if vmwareIsNetworkingEnabled; then echo -n "Module $vnet " [ "`isLoaded "$vnet"`" = 'yes' ] && echo loaded || echo "not loaded" fi if [ "$exitcode" -gt 0 ]; then exit 1 fi ;; restart) "$SCRIPTNAME" stop && "$SCRIPTNAME" start ;; # Called to make sure script is in a runnable state. validate) exit 100 ;; stoppable) [ "`vmmonUseCount`" -lt 1 ] exit ;; *) echo "Usage: "$BASENAME" {start|stop|status|restart|stoppable}" exit 1 esac}SCRIPTNAME="$0"BASENAME=`basename "$SCRIPTNAME"`# Check permissionsif [ "`id -ur`" != '0' ]; then echo 'Error: you must be root.' echo exit 1fivmwareService "$1"exit 0
Никогда не пересобирал из исходников.
Для этого загрузитесь с нужным ядром и
система не загружается.
??
Страница сгенерирована за 0.045 секунд. Запросов: 24.