Всем привет.
Нужна помощь в настройке принтера (BK-T680(U)) на Ubuntu 18.04. Это термопринтер, печатает талоны на киоске, подключён через USB.
terminal@MOR62-T01:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 1eab:0d03
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 003: ID 1c4f:0002 SiGma Micro Keyboard TRACER Gamma Ivory
Bus 004 Device 002: ID 0d9f:00a4 Powercom Co., Ltd WOW Uninterruptible Power Supply (HID PDC)
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 0101:0007
Bus 003 Device 004: ID 154f:154f SNBC CO., Ltd
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 20a0:4162 Clay Logic
Bus 002 Device 002: ID 0df9:0001
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 004: ID 154f:154f SNBC CO., Ltd - это сам принтер.
На официальном сайте скачал драйвер для linux, вот что пишут в readme:
** Installation Procedure:
copy file rastertot6802 to /usr/lib/cups/filter
copy file t6802.ppd to /usr/share/cups/model
Restarting CUPS
Это сделал.
a. Navigate to http://localhost:631 via Netscape Navigator
b. Click on the link that reads "Administration"
c. Click on the link that reads "Add Printer"
d. Fill in the Name, Location, and Description fields as desired.
The text entered into the name field is used to reference the
printer being configured from various applications (such as the
lpr command).
Click on the link that reads "Continue"
e. Choose the port that the printer is connected to from the
choice box (if USB interface printer ,the port is SNBC BK-T680(U) USB #1;if Ethernet printer ,the port is Internet Printing Protocol(ipp) )
Click on the link that reads "Continue"
Note: BK-T680 with USB interface must be printer mode.
На пункте "e" пока остановился. В панели управления CUPS нет в списке нужного принтера.
Возможно, я чего-то не понимаю. Подскажите пожалуйста, куда копать?