Добрый день всем.
Я понимаю, что подобные темы уже были, но решения я так и не нашёл, по крайней мере с теми нюансами, которые есть у меня.
Итак,
дано:два винта:
SSD 120Гб Kingston, на нём у меня венда 8.1 и /
HDD 1Тб Hitachi, на нём /home и файлосклад, монтируемый в /media/Storage
для полной инфы:kosumosu@kosumosu-pc:~$ sudo fdisk -l /dev/sda
[sudo] пароль для kosumosu:
Диск /dev/sda: 111,8 GiB, 120034123776 байтов, 234441648 секторов
Единицы измерения: секторов из 1 * 512 = 512 байтов
Размер сектора (логический/физический): 512 байт / 512 байт
I/O size (minimum/optimal): 512 bytes / 512 bytes
Тип метки диска: gpt
Идентификатор диска: 4A1697A2-CC92-451B-A50F-5AE8513618CC
Устр-во Start Конец Секторы Size Тип
/dev/sda1 2048 616447 614400 300M Windows recovery environment
/dev/sda2 616448 821247 204800 100M EFI System
/dev/sda3 821248 1083391 262144 128M Microsoft reserved
/dev/sda4 1083392 104859647 103776256 49,5G Microsoft basic data
/dev/sda5 104859648 154859519 49999872 23,9G Linux filesystem
kosumosu@kosumosu-pc:~$ sudo fdisk -l /dev/sdb
Диск /dev/sdb: 931,5 GiB, 1000204886016 байтов, 1953525168 секторов
Единицы измерения: секторов из 1 * 512 = 512 байтов
Размер сектора (логический/физический): 512 байт / 512 байт
I/O size (minimum/optimal): 512 bytes / 512 bytes
Тип метки диска: dos
Идентификатор диска: 0x58db01dc
Устр-во Загрузочный Start Конец Секторы Size Id Тип
/dev/sdb2 2048 147916799 147914752 70,5G 83 Linux
/dev/sdb3 147916800 1827696639 1679779840 801G 7 HPFS/NTFS/exFAT
Дистрибутив у меня Ubuntu 16.04.1 x64, до этого был 14.04.2 x64, проблему увидел ещё на нём, подумал, что ядро обновилось, что-то пошло не так, и в итоге поставил поновее LTS, с полным затиранием /home.
инфа о ядре:kosumosu@kosumosu-pc:~$ uname -a
Linux kosumosu-pc 4.4.0-57-generic #78-Ubuntu SMP Fri Dec 9 23:50:32 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
Проблема: периодически, система виснет, раскладку невозможно становится изменить, рандомно сыпет ошибками системы (иногда не сыпет), перемонтирует как ридонли /home и /media/Storage. Ребут иногда помогает, иногда снова получается то же самое. Иногда день всё норм.
По логам после ребута наблюдаю такое (многабукаф):
kosumosu@kosumosu-pc:~$ dmesg | egrep -i "(error|fail|warning)"
[ 0.744866] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 1.097561] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 1.097565] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff8802160bae88), AE_NOT_FOUND (20150930/psparse-542)
[ 1.098472] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 1.098475] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff8802160baf00), AE_NOT_FOUND (20150930/psparse-542)
[ 1.098870] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 1.098874] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff8802160bae88), AE_NOT_FOUND (20150930/psparse-542)
[ 1.100576] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 1.100579] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff8802160baf00), AE_NOT_FOUND (20150930/psparse-542)
[ 1.103760] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 1.103763] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff8802160bae10), AE_NOT_FOUND (20150930/psparse-542)
[ 1.123671] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 1.123675] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff8802160bae10), AE_NOT_FOUND (20150930/psparse-542)
[ 1.969474] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 2.078247] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[ 2.078254] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 2.078257] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 2.078260] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 3177.344748] ata2.00: irq_stat 0x08000000, interface fatal error
[ 3177.344751] ata2: SError: { UnrecovData Handshk }
[ 3177.344755] ata2.00: failed command: WRITE FPDMA QUEUED
res 50/00:20:88:14:46/00:00:04:00:00/40 Emask 0x10 (ATA bus error)
[ 3177.665663] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 3177.665671] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff8802160bae88), AE_NOT_FOUND (20150930/psparse-542)
[ 3177.667222] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 3177.667229] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff8802160bae88), AE_NOT_FOUND (20150930/psparse-542)
во время нормальной загрузки, пока не поймал этот глюк
вижу в dmesg это (фрагмент с ошибками):
[ 1.082530] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.082562] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.082588] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.083355] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 1.083359] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff8802160bae88), AE_NOT_FOUND (20150930/psparse-542)
[ 1.083725] ata2.00: ATA-8: Hitachi HDS5C1010CLA382, JC4OA3MA, max UDMA/133
[ 1.083730] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.084263] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 1.084267] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff8802160baf00), AE_NOT_FOUND (20150930/psparse-542)
[ 1.084272] ata3.00: ATAPI: Optiarc DVD RW AD-5260S, 1.00, max UDMA/100
[ 1.084709] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 1.084713] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff8802160bae88), AE_NOT_FOUND (20150930/psparse-542)
[ 1.085075] ata2.00: configured for UDMA/133
[ 1.086330] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 1.086333] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff8802160baf00), AE_NOT_FOUND (20150930/psparse-542)
[ 1.086339] ata3.00: configured for UDMA/100
[ 1.093941] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 1.093944] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff8802160bae10), AE_NOT_FOUND (20150930/psparse-542)
[ 1.099443] ata1.00: ATA-8: KINGSTON SV300S37A120G, 521ABBF0, max UDMA/133
[ 1.099447] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.110744] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.111277] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.111282] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.111604] hub 1-1:1.0: USB hub found
[ 1.111693] hub 1-1:1.0: 6 ports detected
[ 1.113928] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 1.113932] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff8802160bae10), AE_NOT_FOUND (20150930/psparse-542)
[ 1.119143] ata1.00: configured for UDMA/133
[ 1.119454] scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
[ 1.119674] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 1.119700] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.119713] sd 0:0:0:0: [sda] Write Protect is off
[ 1.119715] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.119726] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.119940] scsi 1:0:0:0: Direct-Access ATA Hitachi HDS5C101 A3MA PQ: 0 ANSI: 5
[ 1.120108] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.120128] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.120158] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.120161] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.120193] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.120629] sda: sda1 sda2 sda3 sda4 sda5
[ 1.120888] sd 0:0:0:0: [sda] Attached SCSI disk
Во время самого означенного глюка сыпется вот что:
[ 684.616811] ata2.00: failed command: WRITE FPDMA QUEUED
[ 684.616813] ata2.00: cmd 61/08:f0:a0:0c:40/00:00:04:00:00/40 tag 30 ncq 4096 out
res 50/00:08:08:08:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 684.616814] ata2.00: status: { DRDY }
(иногда без DRDY) Я знаю по поиску, что DRDY это адски плохо, и возможно винту хана (например,
https://forum.ubuntu.ru/index.php?topic=184481.0). Но какому?
оба винта смарту выдают ок:
SSD:kosumosu@kosumosu-pc:~$ sudo smartctl -a /dev/sda
[sudo] пароль для kosumosu:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-57-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SandForce Driven SSDs
Device Model: KINGSTON SV300S37A120G
Serial Number: 50026B724207AF31
LU WWN Device Id: 5 0026b7 24207af31
Firmware Version: 521ABBF0
User Capacity: 120 034 123 776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Jan 7 00:52:41 2017 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 1) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 36) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0025) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0033 120 120 050 Pre-fail Always - 0/0
5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always - 0
9 Power_On_Hours_and_Msec 0x0032 082 082 000 Old_age Always - 15833h+58m+14.750s
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 331
171 Program_Fail_Count 0x000a 000 000 000 Old_age Always - 0
172 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline - 10
177 Wear_Range_Delta 0x0000 000 000 000 Old_age Offline - 0
181 Program_Fail_Count 0x000a 000 000 000 Old_age Always - 0
182 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
187 Reported_Uncorrect 0x0012 100 100 000 Old_age Always - 0
189 Airflow_Temperature_Cel 0x0000 030 037 000 Old_age Offline - 30 (Min/Max 18/37)
194 Temperature_Celsius 0x0022 030 037 000 Old_age Always - 30 (Min/Max 18/37)
195 ECC_Uncorr_Error_Count 0x001c 120 120 000 Old_age Offline - 0/0
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0
201 Unc_Soft_Read_Err_Rate 0x001c 120 120 000 Old_age Offline - 0/0
204 Soft_ECC_Correct_Rate 0x001c 120 120 000 Old_age Offline - 0/0
230 Life_Curve_Status 0x0013 100 100 000 Pre-fail Always - 100
231 SSD_Life_Left 0x0013 100 100 010 Pre-fail Always - 0
233 SandForce_Internal 0x0032 000 000 000 Old_age Always - 1447
234 SandForce_Internal 0x0032 000 000 000 Old_age Always - 847
241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always - 847
242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always - 980
SMART Error Log not supported
SMART Self-test Log not supported
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
HDD:kosumosu@kosumosu-pc:~$ sudo smartctl -a /dev/sdb
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-57-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Hitachi HDS5C1010CLA382
Serial Number: JC0950HX181VMH
LU WWN Device Id: 5 000cca 363d1c173
Firmware Version: JC4OA3MA
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5700 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Sat Jan 7 00:17:24 2017 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (11942) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 199) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline - 110
3 Spin_Up_Time 0x0007 118 118 024 Pre-fail Always - 297 (Average 296)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 1263
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 135 135 020 Pre-fail Offline - 36
9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 20770
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1243
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 1270
193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 1270
194 Temperature_Celsius 0x0002 193 193 000 Old_age Always - 31 (Min/Max 19/46)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 13685
SMART Error Log Version: 1
ATA Error Count: 341 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 341 occurred at disk power-on lifetime: 20503 hours (854 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 07 28 fc 01 Error: ICRC, ABRT at LBA = 0x01fc2807 = 33302535
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 08 78 00 28 fc 40 00 44d+08:35:51.023 WRITE FPDMA QUEUED
ef 90 03 00 00 00 a0 00 44d+08:35:50.936 SET FEATURES [Disable SATA feature]
ec 00 00 00 00 00 a0 00 44d+08:35:50.931 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 00 44d+08:35:50.930 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 44d+08:35:50.925 IDENTIFY DEVICE
Error 340 occurred at disk power-on lifetime: 20503 hours (854 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 07 28 fc 01 Error: ICRC, ABRT at LBA = 0x01fc2807 = 33302535
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 08 70 00 28 fc 40 00 44d+08:35:48.972 WRITE FPDMA QUEUED
ef 90 03 00 00 00 a0 00 44d+08:35:48.886 SET FEATURES [Disable SATA feature]
ec 00 00 00 00 00 a0 00 44d+08:35:48.881 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 00 44d+08:35:48.880 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 44d+08:35:48.874 IDENTIFY DEVICE
Error 339 occurred at disk power-on lifetime: 20503 hours (854 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 07 28 fc 01 Error: ICRC, ABRT at LBA = 0x01fc2807 = 33302535
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 08 68 00 28 fc 40 00 44d+08:35:46.921 WRITE FPDMA QUEUED
ef 90 03 00 00 00 a0 00 44d+08:35:46.835 SET FEATURES [Disable SATA feature]
ec 00 00 00 00 00 a0 00 44d+08:35:46.830 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 00 44d+08:35:46.829 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 44d+08:35:46.824 IDENTIFY DEVICE
Error 338 occurred at disk power-on lifetime: 20503 hours (854 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 07 28 fc 01 Error: ICRC, ABRT at LBA = 0x01fc2807 = 33302535
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 08 60 00 28 fc 40 00 44d+08:35:44.871 WRITE FPDMA QUEUED
ef 90 03 00 00 00 a0 00 44d+08:35:44.784 SET FEATURES [Disable SATA feature]
ec 00 00 00 00 00 a0 00 44d+08:35:44.779 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 00 44d+08:35:44.778 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 44d+08:35:44.773 IDENTIFY DEVICE
Error 337 occurred at disk power-on lifetime: 20503 hours (854 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 07 28 fc 01 Error: ICRC, ABRT at LBA = 0x01fc2807 = 33302535
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 08 58 00 28 fc 40 00 44d+08:35:42.820 WRITE FPDMA QUEUED
ef 90 03 00 00 00 a0 00 44d+08:35:42.733 SET FEATURES [Disable SATA feature]
ec 00 00 00 00 00 a0 00 44d+08:35:42.728 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 00 44d+08:35:42.727 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 44d+08:35:42.722 IDENTIFY DEVICE
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
или smart не показатель?)
Читал, что такое бывает с дисками HDD на 1Тб с размером блока в 4Кб, но у меня 512 и логический и физический. Может, я не туда смотрю разве что. Ещё бывает, что на чипсетах NVidia такое бывает, но у меня контроллер SATA Intel. (
https://ru.msi.com/Motherboard/Z77AG41.html#hero-specification)
Что я делал:
- Переставил (обновил с форматом раздела) дистр (с новым /home)
- залез в корпус, продул, пропылесосил, проверил контакты на винтах и сата шнурках
- обновил биос (с 2012 до 2014 года, позже не было)
- отключал AHCI
- в венде NTFS раздел (который в /media/Storage) проверял стандартным методом, он нашёл там ошибки какие-то, исправил.
- может, что-то ещё, не помню
Если бы это была проблема, как здесь: (
https://forum.ubuntu.ru/index.php?topic=115977.0), надо было бы ставить SCSI контроллер SATA, но по параметрам не совпадает, насколько я понял, ошибки по обоим винтам, и даже флешке (или я не понял)).
Наверняка я замыленным взглядом что-то упускаю, причём, весьма элементарное, подскажите