********** CSCM Server Started ********** 04/20/12 10:44:01
Processing configuration file
=============================
ERROR: Can't read options file 'wimaxd.conf'
Configuration file wimaxd.conf not found - using default option values
Option Values In Effect
=======================
BandwidthMHz <Not Set>
ScanMinFrequencyMHz 0.000
ScanMaxFrequencyMHz 0.000
ScanStepFrequencyMHz 0.000
CenterFrequencyMHz <Not Set>
NetworkSearchTimeoutSec 60
LPSearchInShutDownEnabled No
NetworkEntryTimeoutSec 10
NEToHighestCINRBaseStation No
AuthEnabled Yes
EAPMethod 0
UserIdentity ''
UserPassword ''
TTLSAnonymousIdentity 'anonymous'
ValidateServerCert Yes
CACertPath ''
CACertFileName ''
TLSDeviceCertFileName '/lib/firmware/device_cert.pem'
TLSDeviceSubCA1CertFileName ''
TLSDeviceSubCA2CertFileName ''
TLSDevicePrivateKeyFileName '/lib/firmware/device_private_key.pem'
TLSDevicePrivateKeyPassword ''
PrivateKeyPasswordFormat 'Ascii'
AuthenticationTimeoutSec 10
InvertMSKByteOrder No
AlwaysIncludeTLSLength No
EAPFragmentMaxLength 1398
EAPPollingLoopIntervalMs 50
FirmwareRSAPrivateKeyEncrypt No
FirmwarePrivateKeyBits 2048
InnerNAIChange No
BeceemEngineFileName '/lib/engine_beceem.so'
AuthEthernetToRADIUS No
RADIUSIPAddress '192.168.100.1'
RADIUSPort 1812
RADIUSSecret ''
AutoReConnectEnabled No
AutoReDisconnectEnabled No
SkipNetSearch No
AutoReConnectIntervalSec 20
AutoReDisconnectIntervalSec 20
LinkStatusRequestPeriodSec 2
IPRefreshCommand 'udhcpc --now --quit -i veth0 &'
NetEntryIPRefreshEnabled No
TerminateDHCPClient No
FirmwareFileName '/lib/firmware/macxvi200.bin'
ConfigFileName '/lib/firmware/macxvi.cfg'
CSCMDebugLogLevel 2
CSCMDebugLogFileName '/tmp/CM_Server_Debug.log'
CSCMDebugLogFileMaxSizeMB 1
AuthLogLevel 0
AuthLogFileName '/tmp/CM_Auth.log'
EnableAuthSysLogPrints No
AuthLogFileMaxSizeMB 1
EngineLoggingEnabled No
EngineLogFileName '/tmp/CM_Engine.log'
EngineLogFileMaxSizeMB 1
RADIUSClientLogLevel 0
Message queue initialized.
Process messages thread started successfully.
Changed state to: Library initialized
Timer Periodic Action thread has started.
Timer Check Timeouts thread has started.
Timer Authentication thread has started.
Process Messages thread has started.
Changed state to: Waiting for WiMAX adapter ...
Trying to open device.
Device opened successfully.
Registering callback function - Success.
Changed state to: WiMAX adapter initialized
***** Sending subscriber station information request
=============== Received Message Start (2012/03/20 10:44:02.163) ===========
u32State = WiMAX adapter initialized
SS info response received (Type = 7 - Subtype = 1 - Length = 184)
Client socket FFFFFFFF unlock Beceem API: Was not locked (this is not an error)
Found valid library version: 6.0.37
=============== Received Message End (type=7 sub-type=1) ===============
Changed state to: Waiting for WiMAX adapter ...
***** Sending idle mode status request (2012/03/20 10:44:02.359)
***** Sending shutdown status request (2012/03/20 10:44:02.359)
=============== Received Message Start (2012/03/20 10:44:02.359) ===========
u32State = Waiting for WiMAX adapter ...
Idle mode response received (Type = 19 - Subtype = 2 - Length =
Idle mode response length = 8
Changed state to: Waiting for WiMAX adapter ...
Not in idle mode.
=============== Received Message End (type=19 sub-type=2) ===============
***** Sending half-mini card status request (2012/03/20 10:44:02.359)
=============== Received Message Start (2012/03/20 10:44:02.359) ===========
u32State = Waiting for WiMAX adapter ...
Shutdown response received (Type = 30 - Subtype = 5 - Length =
SUBTYPE_SHUTDOWN_MODE_STATUS_RESP return value = 00000001
Changed state to: Waiting for WiMAX adapter ...
=============== Received Message End (type=30 sub-type=5) ===============
(2012/03/20 10:44:02.360) Link status = WAIT FOR PHY SYNC CMD
Changed state to: Waiting for PHY sync start
=============== Received Message Start (2012/03/20 10:44:02.383) ===========
u32State = Waiting for PHY sync start
Half-mini card response received (Type = 36 - Subtype = 3 - Length = 4)
Changed state to: Half-mini Card Device is not shut down
=============== Received Message End (type=36 sub-type=3) ===============
(2012/03/20 10:44:04.361) Link status = WAIT FOR PHY SYNC CMD
Changed state to: Waiting for PHY sync start
(2012/03/20 10:44:06.463) Link status = WAIT FOR PHY SYNC CMD
(2012/03/20 10:44:08.564) Link status = WAIT FOR PHY SYNC CMD
(2012/03/20 10:44:10.666) Link status = WAIT FOR PHY SYNC CMD
(2012/03/20 10:45:33.001) Link status = WAIT FOR PHY SYNC CMD
(2012/03/20 10:45:35.103) Link status = WAIT FOR PHY SYNC CMD
(2012/03/20 10:45:37.205) Link status = WAIT FOR PHY SYNC CMD
.................