мои конфиги
proftpd.conf
#
# /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file.
# To really apply changes reload proftpd after modifications.
#
# Includes DSO modules
Include /etc/proftpd/modules.conf
# Set off to disable IPv6 support which is annoying on IPv4 only boxes.
UseIPv6 off
# If set on you can experience a longer connection delay in many cases.
IdentLookups off
ServerName "Debian"
ServerType standalone
DeferWelcome off
MultilineRFC2228 on
DefaultServer on
ShowSymlinks on
TimeoutNoTransfer 600
TimeoutStalled 600
TimeoutIdle 1200
DisplayLogin welcome.msg
DisplayChdir .message true
ListOptions "-l"
DenyFilter \*.*/
# Use this to jail all users in their homes
# DefaultRoot ~
# Users require a valid shell listed in /etc/shells to login.
# Use this directive to release that constrain.
# RequireValidShell off
# Port 21 is the standard FTP port.
Port 21
# In some cases you have to specify passive ports range to by-pass
# firewall limitations. Ephemeral ports can be used for that, but
# feel free to use a more narrow range.
# PassivePorts 49152 65534
# If your host was NATted, this option is useful in order to
# allow passive tranfers to work. You have to use your public
# address and opening the passive ports used on your firewall as well.
# MasqueradeAddress 1.2.3.4
# This is useful for masquerading address with dynamic IPs:
# refresh any configured MasqueradeAddress directives every 8 hours
<IfModule mod_dynmasq.c>
# DynMasqRefresh 28800
</IfModule>
# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 30
# Set the user and group that the server normally runs at.
User proftpd
Group nogroup
# Umask 022 is a good standard umask to prevent new files and dirs
# (second parm) from being group and world writable.
Umask 022 022
# Normally, we want files to be overwriteable.
AllowOverwrite on
# Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords:
# PersistentPasswd off
# This is required to use both PAM-based authentication and local passwords
# AuthOrder mod_auth_pam.c* mod_auth_unix.c
# Be warned: use of this directive impacts CPU average load!
# Uncomment this if you like to see progress and transfer rate with ftpwho
# in downloads. That is not needed for uploads rates.
#
# UseSendFile off
TransferLog /var/log/proftpd/xferlog
SystemLog /var/log/proftpd/proftpd.log
<IfModule mod_quotatab.c>
QuotaEngine off
</IfModule>
<IfModule mod_ratio.c>
Ratios off
</IfModule>
# Delay engine reduces impact of the so-called Timing Attack described in
#
http://security.lss.hr/index.php?page=details&ID=LSS-2004-10-02# It is on by default.
<IfModule mod_delay.c>
DelayEngine on
</IfModule>
<IfModule mod_ctrls.c>
ControlsEngine off
ControlsMaxClients 2
ControlsLog /var/log/proftpd/controls.log
ControlsInterval 5
ControlsSocket /var/run/proftpd/proftpd.sock
</IfModule>
<IfModule mod_ctrls_admin.c>
AdminControlsEngine off
</IfModule>
#
# Alternative authentication frameworks
#
#Include /etc/proftpd/ldap.conf
Include /etc/proftpd/sql.conf
#
# This is used for FTPS connections
#
#Include /etc/proftpd/tls.conf
# A basic anonymous configuration, no upload directories.
# <Anonymous ~ftp>
# User ftp
# Group nogroup
# # We want clients to be able to login with "anonymous" as well as "ftp"
# UserAlias anonymous ftp
# # Cosmetic changes, all files belongs to ftp user
# DirFakeUser on ftp
# DirFakeGroup on ftp
#
# RequireValidShell off
#
# # Limit the maximum number of anonymous logins
# MaxClients 10
#
# # We want 'welcome.msg' displayed at login, and '.message' displayed
# # in each newly chdired directory.
# DisplayLogin welcome.msg
# DisplayChdir .message
#
# # Limit WRITE everywhere in the anonymous chroot
# <Directory *>
# <Limit WRITE>
# DenyAll
# </Limit>
# </Directory>
#
# # Uncomment this if you're brave.
# # <Directory incoming>
# # # Umask 022 is a good standard umask to prevent new files and dirs
# # # (second parm) from being group and world writable.
# # Umask 022 022
# # <Limit READ WRITE>
# # DenyAll
# # </Limit>
# # <Limit STOR>
# # AllowAll
# # </Limit>
# # </Directory>
#
# </Anonymous>
modules.conf
#
# This file is used to manage DSO modules and features.
#
# This is the directory where DSO modules reside
ModulePath /usr/lib/proftpd
# Allow only user root to load and unload modules, but allow everyone
# to see which modules have been loaded
ModuleControlsACLs insmod,rmmod allow user root
ModuleControlsACLs lsmod allow user *
LoadModule mod_ctrls_admin.c
LoadModule mod_tls.c
# Install one of proftpd-mod-mysql, proftpd-mod-pgsql or any other
# SQL backend engine to use this module and the required backend.
# This module must be mandatory loaded before anyone of
# the existent SQL backeds.
LoadModule mod_sql.c
# Install proftpd-mod-ldap to use this
#LoadModule mod_ldap.c
#
# 'SQLBackend mysql' or 'SQLBackend postgres' directives are required
# to have SQL authorization working. You can also comment out the
# unused module here, in alternative.
#
# Install proftpd-mod-mysql and decomment the previous
# mod_sql.c module to use this.
LoadModule mod_sql_mysql.c
# Install proftpd-mod-pgsql and decommen the previous
# mod_sql.c module to use this.
#LoadModule mod_sql_postgres.c
# Install proftpd-mod-sqlite and decomment the previous
# mod_sql.c module to use this
#LoadModule mod_sql_sqlite.c
# Install proftpd-mod-odbc and decomment the previous
# mod_sql.c moduleto use this
#LoadModule mod_sql_odbc.c
LoadModule mod_radius.c
LoadModule mod_quotatab.c
LoadModule mod_quotatab_file.c
# Install proftpd-mod-ldap to use this
#LoadModule mod_quotatab_ldap.c
# Install proftpd-mod-pgsql or proftpd-mod-mysql to use this
LoadModule mod_quotatab_sql.c
LoadModule mod_quotatab_radius.c
LoadModule mod_wrap.c
LoadModule mod_rewrite.c
LoadModule mod_load.c
LoadModule mod_ban.c
LoadModule mod_wrap2.c
LoadModule mod_wrap2_file.c
# Install proftpd-mod-pgsql or proftpd-mod-mysql to use this
LoadModule mod_wrap2_sql.c
LoadModule mod_dynmasq.c
# keep this module the last one
LoadModule mod_ifsession.c
sql.conf
#
# Proftpd sample configuration for SQL-based authentication.
#
# (This is not to be used if you prefer a PAM-based SQL authentication)
#
<IfModule mod_sql.c>
SQLBackend mysql
# The passwords in MySQL are encrypted using CRYPT
SQLAuthTypes Plaintext Crypt
SQLAuthenticate users groups
# used to connect to the database
# databasename@host database_user user_password
SQLConnectInfo proftpd@localhost proftpd password #вписать свой пароль от пользователя proftpd, базы данных
# Here we tell ProFTPd the names of the database columns in the "usertable"
# we want it to interact with. Match the names with those in the db
SQLUserInfo ftpuser userid passwd uid gid homedir shell
# Here we tell ProFTPd the names of the database columns in the "grouptable"
# we want it to interact with. Again the names match with those in the db
SQLGroupInfo ftpgroup groupname gid members
# set min UID and GID - otherwise these are 999 each
SQLMinID 500
# create a user's home directory on demand if it doesn't exist
CreateHome on
# Update count every time user logs in
SQLLog PASS updatecount
#следующие две строки аналогичны
#SQLNamedQuery updatecount UPDATE "count=count+1, accessed=now() WHERE userid='%u'" ftpuser #оригинал, на моём сервере не заработало
SQLNamedQuery count UPDATE "count=1 WHERE username='%u'" proftpd #измененная, в моём случае, рабочий вариант
# Update modified everytime user uploads or deletes a file
SQLLog STOR,DELE modified
SQLNamedQuery modified UPDATE "modified=now() WHERE userid='%u'" ftpuser
</IfModule>
#данное разделение блоков требуется для правильной работы квот, иначе будет ругаться на запросы БД
<IfModule mod_quota.c>
# User quotas
# ===========
QuotaEngine on
QuotaDirectoryTally on
QuotaDisplayUnits Mb
QuotaShowQuotas on
SQLNamedQuery get-quota-limit SELECT "name, quota_type, per_session, limit_type,
bytes_in_avail, bytes_out_avail, bytes_xfer_avail, files_in_avail,
files_out_avail, files_xfer_avail FROM ftpquotalimits WHERE name = '%{0}' AND
quota_type = '%{1}'"
SQLNamedQuery get-quota-tally SELECT "name, quota_type, bytes_in_used,
bytes_out_used, bytes_xfer_used, files_in_used, files_out_used, files_xfer_used
FROM ftpquotatallies WHERE name = '%{0}' AND quota_type = '%{1}'"
SQLNamedQuery update-quota-tally UPDATE "bytes_in_used = bytes_in_used + %{0},
bytes_out_used = bytes_out_used + %{1}, bytes_xfer_used = bytes_xfer_used + %{2},
files_in_used = files_in_used + %{3}, files_out_used = files_out_used + %{4},
files_xfer_used = files_xfer_used + %{5} WHERE name = '%{6}' AND quota_type =
'%{7}'" ftpquotatallies
SQLNamedQuery insert-quota-tally INSERT "%{0}, %{1}, %{2}, %{3}, %{4}, %{5},
%{6}, %{7}" ftpquotatallies
QuotaLimitTable sql:/get-quota-limit
QuotaTallyTable sql:/get-quota-tally/update-quota-tally/insert-quota-tally
RootLogin off
RequireValidShell off
</IfModule>
дамп БД
-- phpMyAdmin SQL Dump
-- version 3.3.2deb1
--
http://www.phpmyadmin.net--
-- Хост: localhost
-- Время создания: Сен 09 2010 г., 18:43
-- Версия сервера: 5.1.41
-- Версия PHP: 5.3.2-1ubuntu4.2
SET SQL_MODE="NO_AUTO_VALUE_ON_ZERO";
/*!40101 SET @OLD_CHARACTER_SET_CLIENT=@@CHARACTER_SET_CLIENT */;
/*!40101 SET @OLD_CHARACTER_SET_RESULTS=@@CHARACTER_SET_RESULTS */;
/*!40101 SET @OLD_COLLATION_CONNECTION=@@COLLATION_CONNECTION */;
/*!40101 SET NAMES utf8 */;
--
-- База данных: `proftpd`
--
-- --------------------------------------------------------
--
-- Структура таблицы `ftpgroup`
--
CREATE TABLE IF NOT EXISTS `ftpgroup` (
`groupname` varchar(16) NOT NULL DEFAULT '',
`gid` smallint(6) NOT NULL DEFAULT '5500',
`members` varchar(16) NOT NULL DEFAULT '',
KEY `groupname` (`groupname`)
) ENGINE=MyISAM DEFAULT CHARSET=latin1 COMMENT='ProFTP group table';
--
-- Дамп данных таблицы `ftpgroup`
--
INSERT INTO `ftpgroup` (`groupname`, `gid`, `members`) VALUES
('ftpgroup', 1001, 'ftpuser');
-- --------------------------------------------------------
--
-- Структура таблицы `ftpquotalimits`
--
CREATE TABLE IF NOT EXISTS `ftpquotalimits` (
`name` varchar(30) DEFAULT NULL,
`quota_type` enum('user','group','class','all') NOT NULL DEFAULT 'user',
`per_session` enum('false','true') NOT NULL DEFAULT 'false',
`limit_type` enum('soft','hard') NOT NULL DEFAULT 'soft',
`bytes_in_avail` int(10) unsigned NOT NULL DEFAULT '0',
`bytes_out_avail` int(10) unsigned NOT NULL DEFAULT '0',
`bytes_xfer_avail` int(10) unsigned NOT NULL DEFAULT '0',
`files_in_avail` int(10) unsigned NOT NULL DEFAULT '0',
`files_out_avail` int(10) unsigned NOT NULL DEFAULT '0',
`files_xfer_avail` int(10) unsigned NOT NULL DEFAULT '0'
) ENGINE=MyISAM DEFAULT CHARSET=latin1;
--
-- Дамп данных таблицы `ftpquotalimits`
--
INSERT INTO `ftpquotalimits` (`name`, `quota_type`, `per_session`, `limit_type`, `bytes_in_avail`, `bytes_out_avail`, `bytes_xfer_avail`, `files_in_avail`, `files_out_avail`, `files_xfer_avail`) VALUES
('exampleuser', 'user', 'true', 'hard', 15728640, 0, 0, 0, 0, 0);
-- --------------------------------------------------------
--
-- Структура таблицы `ftpquotatallies`
--
CREATE TABLE IF NOT EXISTS `ftpquotatallies` (
`name` varchar(30) NOT NULL DEFAULT '',
`quota_type` enum('user','group','class','all') NOT NULL DEFAULT 'user',
`bytes_in_used` int(10) unsigned NOT NULL DEFAULT '0',
`bytes_out_used` int(10) unsigned NOT NULL DEFAULT '0',
`bytes_xfer_used` int(10) unsigned NOT NULL DEFAULT '0',
`files_in_used` int(10) unsigned NOT NULL DEFAULT '0',
`files_out_used` int(10) unsigned NOT NULL DEFAULT '0',
`files_xfer_used` int(10) unsigned NOT NULL DEFAULT '0'
) ENGINE=MyISAM DEFAULT CHARSET=latin1;
--
-- Дамп данных таблицы `ftpquotatallies`
--
-- --------------------------------------------------------
--
-- Структура таблицы `ftpuser`
--
CREATE TABLE IF NOT EXISTS `ftpuser` (
`id` int(10) unsigned NOT NULL AUTO_INCREMENT,
`userid` varchar(32) NOT NULL DEFAULT '',
`passwd` varchar(32) NOT NULL DEFAULT '',
`uid` smallint(6) NOT NULL DEFAULT '5500',
`gid` smallint(6) NOT NULL DEFAULT '5500',
`homedir` varchar(255) NOT NULL DEFAULT '',
`shell` varchar(16) NOT NULL DEFAULT '/sbin/nologin',
`count` int(11) NOT NULL DEFAULT '0',
`accessed` datetime NOT NULL DEFAULT '0000-00-00 00:00:00',
`modified` datetime NOT NULL DEFAULT '0000-00-00 00:00:00',
PRIMARY KEY (`id`),
UNIQUE KEY `userid` (`userid`)
) ENGINE=MyISAM DEFAULT CHARSET=latin1 COMMENT='ProFTP user table' AUTO_INCREMENT=2 ;
--
-- Дамп данных таблицы `ftpuser`
--
INSERT INTO `ftpuser` (`id`, `userid`, `passwd`, `uid`, `gid`, `homedir`, `shell`, `count`, `accessed`, `modified`) VALUES
(1, 'exampleuser', 'secret', 1001, 1001, '/home/www.example.com', '/sbin/nologin', 0, '0000-00-00 00:00:00', '0000-00-00 00:00:00');