Здравствуйте, уважаемые участники сообщества,
пытаюсь записать DVD диск в консоли ОС UBUNTU SERVER 12.04, вот что получаю. личное мнение что в лоток не тот тип диска запхнули, гул ничего русского на эту тему не дал, подскажите кто знает, заранее спасибо.
PS> пишу диск практически закрытыми глазами сервер в одной части страны, я в другой, поэтому прошу помочь, и объяснить, что от меня хочет WODIM
meinung@home-srv:~$ sudo wodim -v -dao speed=16 dev=/dev/sg0 /home/meinung/main.i so
TOC Type: 1 = CD-ROM
scsidev: '/dev/sg0'
devname: '/dev/sg0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.34
Wodim version: 1.1.11
SCSI buffer size: 64512
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'Optiarc '
Identification : 'DVD RW AD-7170A '
Revision : '1.02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x001A (DVD+RW)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW) (current)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1015808 = 992 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
FIFO size : 12582912 = 12288 KB
Track 01: data 3476 MB
Total size: 3992 MB (395:35.48) = 1780161 sectors
Lout start: 3993 MB (395:37/36) = 1780161 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 514943
Speed set to 5645 KB/s
Starting to write CD/DVD at speed 4.0 in real SAO mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 0
Track 01: 0 of 3476 MB written.Errno: 5 (Input/output error), write_g1 scsi s endcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 30 10 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x10 (medium not formatted) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.136s timeout 200s
write track data: error after 0 bytes
wodim: A write error occured.
wodim: Please properly read the error message above.
Writing time: 24.707s
Average write speed 111.0x.
Fixating...
Fixating time: 0.001s
wodim: fifo had 192 puts and 1 gets.
wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
meinung@home-srv:~$