Всем привет! Возникла задача по настройке freeradius в связке с РРТР, по отдельности радиус и пптп работают, но только стоит их завязать плагином как сразу же начинается необъяснимые вещи, виндовые клиенты перестают подключатся с ошибкой 691, при этом радиус авторизацию производит, а вот пптп об этом почему-то не узнает.
Лог радиуса в момент подключения
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /etc/freeradius/proxy.conf
Config: including file: /etc/freeradius/clients.conf
Config: including file: /etc/freeradius/snmp.conf
Config: including file: /etc/freeradius/eap.conf
Config: including file: /etc/freeradius/sql.conf
main: prefix = "/usr"
main: localstatedir = "/var"
main: logdir = "/var/log/freeradius"
main: libdir = "/usr/lib/freeradius"
main: radacctdir = "/var/log/freeradius/radacct"
main: hostname_lookups = no
main: snmp = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/var/log/freeradius/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/var/run/freeradius/freeradius.pid"
main: user = "freerad"
main: group = "freerad"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = no
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/lib/freeradius
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
pap: encryption_scheme = "crypt"
pap: auto_header = yes
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
mschap: use_mppe = yes
mschap: require_encryption = no
mschap: require_strong = no
mschap: with_ntdomain_hack = no
mschap: passwd = "(null)"
mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "/etc/shadow"
unix: group = "(null)"
unix: radwtmp = "/var/log/freeradius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
eap: default_eap_type = "md5"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
gtc: challenge = "Password: "
gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/etc/freeradius/huntgroups"
preprocess: hints = "/etc/freeradius/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
preprocess: with_alvarion_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded files
files: usersfile = "/etc/freeradius/users"
files: acctusersfile = "/etc/freeradius/acct_users"
files: preproxy_usersfile = "/etc/freeradius/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
detail: detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/var/log/freeradius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.
rad_recv: Access-Request packet from host 127.0.0.1:55138, id=60, length=146
Service-Type = Framed-User
Framed-Protocol = PPP
User-Name = "test"
MS-CHAP-Challenge = 0x7628d5e8b1c31f88175e9745fa543e1d
MS-CHAP2-Response = 0x6400041c6a665b11221732b51070860164ce0000000000000000f0c5d4928273033bac0e3fafac848480da9eee7415e5e35d
Calling-Station-Id = "192.168.2.22"
NAS-IP-Address = 89.162.224.242
NAS-Port = 0
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
rlm_mschap: Found MS-CHAP attributes. Setting 'Auth-Type = mschap'
modcall[authorize]: module "mschap" returns ok for request 0
rlm_realm: No '@' in User-Name = "test", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: No EAP-Message, not doing EAP
modcall[authorize]: module "eap" returns noop for request 0
users: Matched entry test at line 87
modcall[authorize]: module "files" returns ok for request 0
rlm_pap: Found existing Auth-Type, not changing it.
modcall[authorize]: module "pap" returns noop for request 0
modcall: leaving group authorize (returns ok) for request 0
rad_check_password: Found Auth-Type MS-CHAP
auth: type "MS-CHAP"
Processing the authenticate section of radiusd.conf
modcall: entering group MS-CHAP for request 0
rlm_mschap: Told to do MS-CHAPv2 for test with NT-Password
rlm_mschap: adding MS-CHAPv2 MPPE keys
modcall[authenticate]: module "mschap" returns ok for request 0
modcall: leaving group MS-CHAP (returns ok) for request 0
Sending Access-Accept of id 60 to 127.0.0.1 port 55138
Service-Type = Framed-User
Framed-Protocol = PPP
Framed-Routing = Broadcast-Listen
MS-CHAP2-Success = 0x64533d37443744303430444542343346393031454243433234344337463344304236444634373330443145
MS-MPPE-Recv-Key = 0x4791973f3add19d3a1378bc8c9819232
MS-MPPE-Send-Key = 0x24f763588c4b109120c6eaead383a3a3
MS-MPPE-Encryption-Policy = 0x00000001
MS-MPPE-Encryption-Types = 0x00000006
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
Приведу лог РРТР в тот же самый момент
Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded.
pptpd-logwtmp: $Version$
using channel 329
Using interface ppp0
Connect: ppp0 <--> /dev/pts/0
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MD5> <magic 0x766c0cc5> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x0 <mru 1400> <magic 0x6f925c2> <pcomp> <accomp> <callback CBCP>]
sent [LCP ConfRej id=0x0 <callback CBCP>]
rcvd [LCP ConfNak id=0x1 <auth chap MS-v2>]
sent [LCP ConfReq id=0x2 <asyncmap 0x0> <auth chap MS-v2> <magic 0x766c0cc5> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <mru 1400> <magic 0x6f925c2> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <mru 1400> <magic 0x6f925c2> <pcomp> <accomp>]
rcvd [LCP ConfAck id=0x2 <asyncmap 0x0> <auth chap MS-v2> <magic 0x766c0cc5> <pcomp> <accomp>]
sent [LCP EchoReq id=0x0 magic=0x766c0cc5]
sent [CHAP Challenge id=0x64 <7628d5e8b1c31f88175e9745fa543e1d>, name = "pptpd"]
rcvd [LCP Ident id=0x2 magic=0x6f925c2 "MSRASV5.10"]
rcvd [LCP Ident id=0x3 magic=0x6f925c2 "MSRAS-0-MELKOSOF-EA1D1E"]
rcvd [LCP EchoRep id=0x0 magic=0x6f925c2]
rcvd [CHAP Response id=0x64 <041c6a665b11221732b51070860164ce0000000000000000f0c5d4928273033bac0e3fafac848480da9eee7415e5e35d00>, name = "test"]
rc_check_reply: received invalid reply digest from RADIUS server
Peer test failed CHAP authentication
sent [CHAP Failure id=0x64 ""]
sent [LCP TermReq id=0x3 "Authentication failed"]
rcvd [LCP TermAck id=0x3 "Authentication failed"]
Connection terminated.
По мере необходимости предоставлю конфигурационные файлы
Уже перегуглил все что гуглится и не гуглится
все никак не выходит их завязать. Знающие подскажите пожалуйста!
Тема: настройка freeradius + pptpd ubuntu 8.04 (Прочитано 2307 раз)
