Проверка дисков при загрузке и сообщения "bit already cleared"

[kitaets]

Без всякого моего разрешения комп взялся при каждой загрузке проверять диски. Опасаюсь, что SSD умирает.
В syslog'е:

Код: [Выделить]

Jun 29 09:40:58 kitaets-Eee kernel: [ 1532.397709] EXT2-fs (sdb1): error: ext2_valid_block_bitmap: Invalid block bitmap - block_group = 17, block = 557056
Jun 29 09:42:30 kitaets-Eee kernel: [ 1624.090132] EXT2-fs (sdb1): error: ext2_free_blocks: bit already cleared for block 574739
Jun 29 09:42:30 kitaets-Eee kernel: [ 1624.092360] EXT2-fs (sdb1): error: ext2_free_blocks: bit already cleared for block 574745
Jun 29 09:42:30 kitaets-Eee kernel: [ 1624.095789] EXT2-fs (sdb1): error: ext2_free_blocks: bit already cleared for block 574748
и т.д. - много-много "bit already cleared"Что это значит? Гугл выдаёт только исходники на С с этими сообщениями.

[victor00000]

Код: [Выделить]

dmesg | grep " ata"

[kitaets]

Код: [Выделить]

dmesg | grep " ata"

Код: [Выделить]

kitaets@kitaets-Eee:~$ dmesg | grep " ata"
[27075.042186] ata_piix 0000:00:1f.2: PCI INT B disabled
[27075.283391] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[27075.283402] ata_piix 0000:00:1f.2: setting latency timer to 64
[27075.460726] ata2.01: ACPI cmd ef/03:44:00:00:00:b0 (SET FEATURES) filtered out
[27075.460736] ata2.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
[27075.468632] ata2.00: ACPI cmd ef/03:44:00:00:00:a0 (SET FEATURES) filtered out
[27075.468642] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[27075.476501] ata2.00: configured for UDMA/66
[27075.484524] ata2.01: configured for UDMA/66
[27359.662033] ata_piix 0000:00:1f.2: PCI INT B disabled
[27359.907265] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[27359.907275] ata_piix 0000:00:1f.2: setting latency timer to 64
[27360.084533] ata2.01: ACPI cmd ef/03:44:00:00:00:b0 (SET FEATURES) filtered out
[27360.084547] ata2.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
[27360.092765] ata2.00: ACPI cmd ef/03:44:00:00:00:a0 (SET FEATURES) filtered out
[27360.092783] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[27360.100581] ata2.00: configured for UDMA/66
[27360.108558] ata2.01: configured for UDMA/66
[27827.761393] ata_piix 0000:00:1f.2: PCI INT B disabled
[27828.011265] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[27828.011275] ata_piix 0000:00:1f.2: setting latency timer to 64
[27828.188671] ata2.01: ACPI cmd ef/03:44:00:00:00:b0 (SET FEATURES) filtered out
[27828.188687] ata2.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
[27828.196677] ata2.00: ACPI cmd ef/03:44:00:00:00:a0 (SET FEATURES) filtered out
[27828.196696] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[27828.204474] ata2.00: configured for UDMA/66
[27828.212536] ata2.01: configured for UDMA/66
[27945.694843] ata_piix 0000:00:1f.2: PCI INT B disabled
[27945.939339] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[27945.939350] ata_piix 0000:00:1f.2: setting latency timer to 64
[27946.116678] ata2.01: ACPI cmd ef/03:44:00:00:00:b0 (SET FEATURES) filtered out
[27946.116689] ata2.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
[27946.124965] ata2.00: ACPI cmd ef/03:44:00:00:00:a0 (SET FEATURES) filtered out
[27946.124965] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[27946.132610] ata2.00: configured for UDMA/66
[27946.140622] ata2.01: configured for UDMA/66
kitaets@kitaets-Eee:~$


[victor00000]

http://lmgtfy.com/?q=SET+FEATURES)+filtered+out

[kitaets]

http://lmgtfy.com/?q=SET+FEATURES)+filtered+out

These are debug/info messages. Just ignore them.

Это сообщение есть по каждому из четырёх флэш-дисков, однако в syslog'е ругань только на sdb1.