[РЕШЕНО]Настройка proftpd

[GooG1e]

Всем привет) Решил настроить у себя на сервачке ftp сервер, но столкнулся с двумя проблемками:
1)Нужно чтобы подключаться могли только определенные пользователи или аноним(Ну это я более или менее представляю)
2)Нужно ограничить каждого пользователя в своей директории, причем эта директория не домашня т.е. её нужно индивидуально задать для каждого пользователя.

Заранее всем спасибо за помощь)

[gregory5]

vsftpd умеет виртуальных пользователей и юзер. конфиги для каждого

proftpd тоже, но я не настраивал потому через гугл, что вы и сами сможете

[GooG1e]

Ну так я кажись понял, что надо сделать)) спасибо за помощь)
Пользователь решил продолжить мысль 09 Июля 2012, 20:25:44:Поправил собственно конфиги, чтобы через Mysql шла авторизация, но почему-то перестал аноним работать прошу помочь

Код: [Выделить]

#
# /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file.
# To really apply changes, reload proftpd after modifications, if
# it runs in daemon mode. It is not required in inetd/xinetd mode.
#

# Includes DSO modules
Include /etc/proftpd/modules.conf

# Set off to disable IPv6 support which is annoying on IPv4 only boxes.
UseIPv6 on
# If set on you can experience a longer connection delay in many cases.
IdentLookups off

ServerName "Debian"
ServerType standalone
DeferWelcome off

MultilineRFC2228 on
DefaultServer on
ShowSymlinks on

TimeoutNoTransfer 600
TimeoutStalled 600
TimeoutIdle 1200

DisplayLogin                    welcome.msg
DisplayChdir                .message true
ListOptions                "-l"

DenyFilter \*.*/

# Use this to jail all users in their homes
DefaultRoot ~

# Users require a valid shell listed in /etc/shells to login.
# Use this directive to release that constrain.
# RequireValidShell off

# Port 21 is the standard FTP port.
Port 21

# In some cases you have to specify passive ports range to by-pass
# firewall limitations. Ephemeral ports can be used for that, but
# feel free to use a more narrow range.
# PassivePorts                  49152 65534

# If your host was NATted, this option is useful in order to
# allow passive tranfers to work. You have to use your public
# address and opening the passive ports used on your firewall as well.
# MasqueradeAddress 1.2.3.4

# This is useful for masquerading address with dynamic IPs:
# refresh any configured MasqueradeAddress directives every 8 hours
<IfModule mod_dynmasq.c>
# DynMasqRefresh 28800
</IfModule>

# To prevent DoS attacks, set the maximum number of child processes
# to 30.  If you need to allow more than 30 concurrent connections
# at once, simply increase this value.  Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 30

# Set the user and group that the server normally runs at.
User proftpd
Group nogroup

# Umask 022 is a good standard umask to prevent new files and dirs
# (second parm) from being group and world writable.
Umask 022  022
# Normally, we want files to be overwriteable.
AllowOverwrite on

# Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords:
# PersistentPasswd off

# This is required to use both PAM-based authentication and local passwords
# AuthOrder mod_auth_pam.c* mod_auth_unix.c

# Be warned: use of this directive impacts CPU average load!
# Uncomment this if you like to see progress and transfer rate with ftpwho
# in downloads. That is not needed for uploads rates.
#
# UseSendFile off

TransferLog /var/log/proftpd/xferlog
SystemLog   /var/log/proftpd/proftpd.log

# Logging onto /var/log/lastlog is enabled but set to off by default
#UseLastlog on

# In order to keep log file dates consistent after chroot, use timezone info
# from /etc/localtime.  If this is not set, and proftpd is configured to
# chroot (e.g. DefaultRoot or <Anonymous>), it will use the non-daylight
# savings timezone regardless of whether DST is in effect.
#SetEnv TZ :/etc/localtime

<IfModule mod_quotatab.c>
QuotaEngine off
</IfModule>

<IfModule mod_ratio.c>
Ratios off
</IfModule>


# Delay engine reduces impact of the so-called Timing Attack described in
# http://www.securityfocus.com/bid/11430/discuss
# It is on by default.
<IfModule mod_delay.c>
DelayEngine on
</IfModule>

<IfModule mod_ctrls.c>
ControlsEngine        off
ControlsMaxClients    2
ControlsLog           /var/log/proftpd/controls.log
ControlsInterval      5
ControlsSocket        /var/run/proftpd/proftpd.sock
</IfModule>

<IfModule mod_ctrls_admin.c>
AdminControlsEngine off
</IfModule>

#
# Alternative authentication frameworks
#
#Include /etc/proftpd/ldap.conf
#Include /etc/proftpd/sql.conf

#
# This is used for FTPS connections
#
#Include /etc/proftpd/tls.conf

#
# Useful to keep VirtualHost/VirtualRoot directives separated
#
#Include /etc/proftpd/virtuals.con

# A basic anonymous configuration, no upload directories.

 
# Include other custom configuration files
Include /etc/proftpd/conf.d/
#AuthOrder                      mod_sql.c
tcpNoDelay on
 SQLConnectInfo proftpd@localhost proftpd abcd51336w  # это пароль для конекта к Mysql (скорее он другой)
 SQLAuthTypes plaintext
 SQLUserInfo users username password uid gid homedir NULL
RequireValidShell off
 SQLGroupInfo groups groupname gid members
 SQLAuthenticate users
 SQLNamedQuery getcount SELECT "count, username from users where username='%u'"
 SQLNamedQuery updatecount UPDATE "count=count+1 WHERE username='%u'" users
 SQLShowInfo PASS "230" "You've logged on %{getcount} times, %u"
 SQLLog PASS updatecount
RootLogin on
AuthAliasOnly off
UseFtpUsers off
LoginPasswordPrompt off
AllowOverwrite on

<Anonymous /share/share>
RequireValidShell off
AnonRequirePassword off
SQLEngine off

   User                         ftp
   Group                        ftp

  ### We want clients to be able to login with "anonymous" as well as "ftp"
   UserAlias                    anonymous ftp

  ### Limit the maximum number of anonymous logins
   MaxClients                   20

  ### We want 'welcome.msg' displayed at login, and '.message' displayed
  ### in each newly chdired directory.
   DisplayLogin                 welcome.msg
#   DisplayFirstChdir           .message

  ### Limit WRITE everywhere in the anonymous chroot
<Limit READ>
AllowAll
</Limit>

<Limit WRITE>
DenyAll
</Limit>
</Anonymous>
Ошибку вот такую выдает
USER anonymous: no such user found from 85.159.41.56 [85.159.41.56] to 85.159.41.58:2
Пользователь решил продолжить мысль 09 Июля 2012, 21:26:58:P.S.Если убрать все что связано с MySQL, то анонимный доступ работает.
Пользователь решил продолжить мысль 09 Июля 2012, 23:19:12:Решил проблему - закомментировал строку
AuthAliasOnly off