громкий hdd

[almihor]

Axa-Ru,

(Нажмите, чтобы показать/скрыть)

almihor@almihor-pc:~$ sudo hdparm -I /dev/sda
[sudo] password for almihor:

/dev/sda:

ATA device, with non-removable media
   Model Number:       Hitachi HTS545050A7E380                 
   Serial Number:      TA9511GZHRA1ZS
   Firmware Revision:  GG2OA6C0
   Transport:          Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6; Revision: ATA8-AST T13 Project D1697 Revision 0b
Standards:
   Used: unknown (minor revision code 0x0028)
   Supported: 8 7 6 5
   Likely used: 8
Configuration:
   Logical      max   current
   cylinders   16383   16383
   heads      16   16
   sectors/track   63   63
   --
   CHS current addressable sectors:   16514064
   LBA    user addressable sectors:  268435455
   LBA48  user addressable sectors:  976773168
   Logical  Sector size:                   512 bytes
   Physical Sector size:                  4096 bytes
   Logical Sector-0 offset:                  0 bytes
   device size with M = 1024*1024:      476940 MBytes
   device size with M = 1000*1000:      500107 MBytes (500 GB)
   cache/buffer size  = 8192 KBytes (type=DualPortCache)
   Form Factor: 2.5 inch
   Nominal Media Rotation Rate: 5400
Capabilities:
   LBA, IORDY(can be disabled)
   Queue depth: 32
   Standby timer values: spec'd by Standard, no device specific minimum
   R/W multiple sector transfer: Max = 16   Current = 16
   Advanced power management level: disabled
   DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
        Cycle time: min=120ns recommended=120ns
   PIO: pio0 pio1 pio2 pio3 pio4
        Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
   Enabled   Supported:
      *   SMART feature set
          Security Mode feature set
      *   Power Management feature set
      *   Write cache
      *   Look-ahead
      *   Host Protected Area feature set
      *   WRITE_BUFFER command
      *   READ_BUFFER command
      *   NOP cmd
      *   DOWNLOAD_MICROCODE
          Advanced Power Management feature set
          Power-Up In Standby feature set
      *   SET_FEATURES required to spinup after power up
          SET_MAX security extension
      *   48-bit Address feature set
      *   Device Configuration Overlay feature set
      *   Mandatory FLUSH_CACHE
      *   FLUSH_CACHE_EXT
      *   SMART error logging
      *   SMART self-test
      *   General Purpose Logging feature set
      *   WRITE_{DMA|MULTIPLE}_FUA_EXT
      *   64-bit World wide name
      *   IDLE_IMMEDIATE with UNLOAD
      *   WRITE_UNCORRECTABLE_EXT command
      *   {READ,WRITE}_DMA_EXT_GPL commands
      *   Segmented DOWNLOAD_MICROCODE
      *   Gen1 signaling speed (1.5Gb/s)
      *   Gen2 signaling speed (3.0Gb/s)
      *   Native Command Queueing (NCQ)
      *   Host-initiated interface power management
      *   Phy event counters
      *   NCQ priority information
          Non-Zero buffer offsets in DMA Setup FIS
      *   DMA Setup Auto-Activate optimization
          Device-initiated interface power management
          In-order data delivery
      *   Software settings preservation
      *   SMART Command Transport (SCT) feature set
      *   SCT LBA Segment Access (AC2)
      *   SCT Error Recovery Control (AC3)
      *   SCT Features Control (AC4)
      *   SCT Data Tables (AC5)
Security:
   Master password revision code = 65534
      supported
   not   enabled
   not   locked
      frozen
   not   expired: security count
      supported: enhanced erase
   114min for SECURITY ERASE UNIT. 116min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 5000cca654d83d72
   NAA      : 5
   IEEE OUI   : 000cca
   Unique ID   : 654d83d72
Checksum: correct

[Sly_tom_cat]

возможно всё же головки паркуются постоянно, проверьте еще раз по скрипту и смотрите чтобы там верно был указан диск, судя по инфе выше sda5

+1 у самого звук только от парковок бесконечных - убрал настройкой hdparm (добавил две строчки в /etc/hdparm.conf: apm = 254 и apm_battery = 254).

[VinnyPooh]

sda5 - это раздел, а нам нужен диск.

ой, сорри, я под простудой туплю :/

у меня на предыдущем ноуте была 1 в 1 проблема с хитачи и, кстати, под виндой он тоже щелкал, возможно это прикол конкретного производителя, а еще я бы пощупал smart - у меня диск в итоге сдох.

ps - если прогуглить "hitachi clicking noise" - там много страдальцев.

[VinnyPooh]

+1 у самого звук только от парковок бесконечных - убрал настройкой hdparm (добавил две строчки в /etc/hdparm.conf: apm = 254 и apm_battery = 254).

вот, я вроде тоже правил конфиг ручками.

[Axa-Ru]

VinnyPooh, бывает. Разобрались же 

almihor, все нормально. Этот диск не поддерживает acoustic management

[almihor]

VinnyPooh,
смарт под окнами смотрел, он здоров
Axa-Ru,
блин, ладно хх
т.е. это нормально что он так громко работает и остаётся только смиритсья с тем, что его не заглушить?

[Axa-Ru]

Судя по всему да.
Если smart информация не показывает увеличение ошибок, значит все в порядке.

[almihor]

Судя по всему да.
Если smart информация не показывает увеличение ошибок, значит все в порядке.

ну под окнами первые 2 дня всё было хорошо, а потом я их случайно убил :с
ноутбук новый, с четверга

[Axa-Ru]

Код: [Выделить]

sudo apt-get install smartmontools
sudo smartctl -a /dev/sda

[almihor]

Axa-Ru,

(Нажмите, чтобы показать/скрыть)

almihor@almihor-pc:~$ sudo smartctl -a /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-37-generic-pae] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     Hitachi HTS545050A7E380
Serial Number:    TA9511GZHRA1ZS
LU WWN Device Id: 5 000cca 654d83d72
Firmware Version: GG2OA6C0
User Capacity:    500 107 862 016 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 6
Local Time is:    Sun Feb 17 22:41:10 2013 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)   Offline data collection activity
               was never started.
               Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:       (   45) seconds.
Offline data collection
capabilities:           (0x5b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               No Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   2) minutes.
Extended self-test routine
recommended polling time:     ( 116) minutes.
SCT capabilities:           (0x003d)   SCT Status supported.
               SCT Error Recovery Control supported.
               SCT Feature Control supported.
               SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   062    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   100   100   040    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0007   223   223   033    Pre-fail  Always       -       1
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       177
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   040    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       45
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       77
191 G-Sense_Error_Rate      0x000a   099   099   000    Old_age   Always       -       65537
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       18
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       317
194 Temperature_Celsius     0x0002   150   150   000    Old_age   Always       -       40 (Min/Max 15/48)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0
223 Load_Retry_Count        0x000a   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 48 (device log contains only the most recent five errors)
   CR = Command Register [HEX]
   FR = Features Register [HEX]
   SC = Sector Count Register [HEX]
   SN = Sector Number Register [HEX]
   CL = Cylinder Low Register [HEX]
   CH = Cylinder High Register [HEX]
   DH = Device/Head Register [HEX]
   DC = Device Command Register [HEX]
   ER = Error register [HEX]
   ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 48 occurred at disk power-on lifetime: 12 hours (0 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 68 35 ba 02  Error: WP at LBA = 0x02ba3568 = 45757800

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 18 68 88 9a 44 40 00      00:39:38.053  WRITE FPDMA QUEUED
  61 48 60 b0 cd 44 40 00      00:39:38.052  WRITE FPDMA QUEUED
  61 00 58 b0 cc 44 40 00      00:39:38.052  WRITE FPDMA QUEUED
  61 20 50 48 cc 44 40 00      00:39:38.052  WRITE FPDMA QUEUED
  61 10 48 20 cc 44 40 00      00:39:38.051  WRITE FPDMA QUEUED

Error 47 occurred at disk power-on lifetime: 12 hours (0 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 68 35 ba 02  Error: WP at LBA = 0x02ba3568 = 45757800

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 08 10 48 c6 44 40 00      00:39:34.397  WRITE FPDMA QUEUED
  60 18 08 58 35 ba 40 00      00:39:34.397  READ FPDMA QUEUED
  ef 02 00 00 00 00 00 00      00:39:34.397  SET FEATURES [Enable write cache]
  60 18 01 01 00 00 a0 ff      00:39:34.354  READ FPDMA QUEUED
  60 18 08 67 35 ba 02 ff      00:39:34.353  READ FPDMA QUEUED

Error 46 occurred at disk power-on lifetime: 12 hours (0 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 68 35 ba 02  Error: UNC at LBA = 0x02ba3568 = 45757800

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 18 18 58 35 ba 40 00      00:39:30.731  READ FPDMA QUEUED
  ef 02 00 00 00 00 00 00      00:39:30.731  SET FEATURES [Enable write cache]
  61 08 01 01 00 00 a0 ff      00:39:30.654  WRITE FPDMA QUEUED
  61 08 08 68 35 ba 02 ff      00:39:30.653  WRITE FPDMA QUEUED
  61 08 18 40 b7 3e 40 00      00:39:27.035  WRITE FPDMA QUEUED

Error 45 occurred at disk power-on lifetime: 12 hours (0 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 68 35 ba 02  Error: WP at LBA = 0x02ba3568 = 45757800

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 08 18 40 b7 3e 40 00      00:39:27.035  WRITE FPDMA QUEUED
  61 08 08 50 b7 3e 40 00      00:39:27.035  WRITE FPDMA QUEUED
  60 18 10 58 35 ba 40 00      00:39:27.034  READ FPDMA QUEUED
  61 20 08 88 ed 3f 40 00      00:39:27.034  WRITE FPDMA QUEUED
  ef 02 00 00 00 00 00 00      00:39:27.034  SET FEATURES [Enable write cache]

Error 44 occurred at disk power-on lifetime: 12 hours (0 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 68 35 ba 02  Error: UNC at LBA = 0x02ba3568 = 45757800

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 18 08 58 35 ba 40 00      00:39:23.399  READ FPDMA QUEUED
  ef 02 00 00 00 00 00 00      00:39:23.399  SET FEATURES [Enable write cache]
  60 18 01 01 00 00 a0 ff      00:39:23.332  READ FPDMA QUEUED
  60 18 08 68 35 ba 02 ff      00:39:23.331  READ FPDMA QUEUED
  60 18 58 58 35 ba 40 00      00:39:19.718  READ FPDMA QUEUED

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

[Axa-Ru]

У вас все четко. Все ошибки по нулям.

[Sly_tom_cat]

Странно, недавно купил себе в переносной бокс - то же hitachi (HTS541010A9E680) - ваааще его не слышно... 

[Axa-Ru]

Посмотрел
У меня в кейсе    Model Number:       Hitachi HTS547550A9E384
Его тоже не слышно.
almihor, не парьтесь. А то мы вас запутаем сейчас окончательно.
Работает и хорошо.

[almihor]

ладно, буду привыкать хх
спасибо всем)