Помогите с настройкой модема Huawei E173

[demkov]

лайнекс это особое колдунство

[Mr.Robot]

данный модем не работал, после выхода из ждущего режима(или если его вставить в usb-разъем при уже загруженной системе),
При выходе из "ждущего", в системном журнале в syslog'е выдавало следующиее:

(Нажмите, чтобы показать/скрыть)

Jun 27 19:52:35 robot8 pppd[2177]: Modem hangup
Jun 27 19:52:35 robot8 pppd[2177]: Connect time 8.0 minutes.
Jun 27 19:52:35 robot8 pppd[2177]: Sent 499614 bytes, received 3524834 bytes.
Jun 27 19:52:35 robot8 pppd[2177]: Connection terminated.
Jun 27 19:52:35 robot8 kernel: [ 1522.983742] option1 ttyUSB0: option_instat_callback: error -108
Jun 27 19:52:35 robot8 kernel: [ 1522.986490] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
Jun 27 19:52:35 robot8 kernel: [ 1522.986519] option 3-2:1.0: device disconnected
Jun 27 19:52:35 robot8 kernel: [ 1522.986547] qmi_wwan 3-2:1.1 wwan0: unregister 'qmi_wwan' usb-0000:00:14.0-2, WWAN/QMI device
Jun 27 19:52:35 robot8 avahi-daemon[1114]: Withdrawing workstation service for ppp0.
Jun 27 19:52:35 robot8 modem-manager[1072]: <info>  (ttyUSB0) closing serial port...
Jun 27 19:52:35 robot8 modem-manager[1072]: <info>  (ttyUSB0) serial port closed
Jun 27 19:52:35 robot8 modem-manager[1072]: <info>  (tty/ttyUSB0): released by modem /sys/devices/pci0000:00/0000:00:14.0/usb3/3-2
Jun 27 19:52:35 robot8 modem-manager[1072]: <info>  Modem /org/freedesktop/ModemManager/Modems/0: state changed (connected -> disabled)
Jun 27 19:52:35 robot8 modem-manager[1072]: <info>  (ttyUSB2) closing serial port...
Jun 27 19:52:35 robot8 NetworkManager[1155]:    SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0)
Jun 27 19:52:35 robot8 avahi-daemon[1114]: Withdrawing workstation service for wwan0.
Jun 27 19:52:35 robot8 modem-manager[1072]: <info>  (ttyUSB2) serial port closed
Jun 27 19:52:35 robot8 NetworkManager[1155]: <info> (ttyUSB0): device state change: activated -> failed (reason 'ip-config-unavailable') [100 120 5]
Jun 27 19:52:35 robot8 kernel: [ 1522.999387] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
Jun 27 19:52:35 robot8 kernel: [ 1522.999403] option 3-2:1.2: device disconnected
Jun 27 19:52:35 robot8 kernel: [ 1522.999452] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
Jun 27 19:52:35 robot8 kernel: [ 1522.999464] option 3-2:1.3: device disconnected
Jun 27 19:52:35 robot8 kernel: [ 1523.111278] usb 3-2: reset high-speed USB device number 3 using xhci_hcd
Jun 27 19:52:35 robot8 kernel: [ 1523.128281] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88011546cb00
Jun 27 19:52:35 robot8 kernel: [ 1523.128289] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88011546ca80
Jun 27 19:52:35 robot8 kernel: [ 1523.128295] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88011546cec0
Jun 27 19:52:35 robot8 kernel: [ 1523.128300] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88011546cac0
Jun 27 19:52:35 robot8 kernel: [ 1523.128306] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801153eec40
Jun 27 19:52:35 robot8 kernel: [ 1523.128311] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88011546ce40
Jun 27 19:52:35 robot8 kernel: [ 1523.128317] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88010b6d6a40
Jun 27 19:52:35 robot8 kernel: [ 1523.128322] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88011546ce80
Jun 27 19:52:35 robot8 kernel: [ 1523.128327] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88010b6d6640
Jun 27 19:52:35 robot8 kernel: [ 1523.128332] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801153eec00
Jun 27 19:52:35 robot8 kernel: [ 1523.128337] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88010b6d6a80
Jun 27 19:52:35 robot8 kernel: [ 1523.128342] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88010b6d6a00
Jun 27 19:52:35 robot8 kernel: [ 1523.128348] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88010b6d6600
Jun 27 19:52:35 robot8 kernel: [ 1523.128353] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88010b6d6ac0
Jun 27 19:52:35 robot8 kernel: [ 1523.130901] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
Jun 27 19:52:35 robot8 kernel: [ 1523.131083] option 3-2:1.3: GSM modem (1-port) converter detected
Jun 27 19:52:35 robot8 kernel: [ 1523.131311] usb 3-2: GSM modem (1-port) converter now attached to ttyUSB1
Jun 27 19:52:35 robot8 kernel: [ 1523.131410] option 3-2:1.2: GSM modem (1-port) converter detected
Jun 27 19:52:35 robot8 kernel: [ 1523.131519] usb 3-2: GSM modem (1-port) converter now attached to ttyUSB2
Jun 27 19:52:35 robot8 kernel: [ 1523.133328] qmi_wwan 3-2:1.1: cdc-wdm0: USB WDM device
Jun 27 19:52:35 robot8 kernel: [ 1523.133627] qmi_wwan 3-2:1.1 wwan0: register 'qmi_wwan' at usb-0000:00:14.0-2, WWAN/QMI device, ca:09:77:02:db:bd
Jun 27 19:52:35 robot8 kernel: [ 1523.133946] option 3-2:1.0: GSM modem (1-port) converter detected
Jun 27 19:52:35 robot8 kernel: [ 1523.134077] usb 3-2: GSM modem (1-port) converter now attached to ttyUSB3
Jun 27 19:52:35 robot8 modem-manager[1072]: <info>  (ttyUSB3) opening serial port...
Jun 27 19:52:35 robot8 modem-manager[1072]: <warn>  (ttyUSB3): port attributes not fully set
Jun 27 19:52:36 robot8 modem-manager[1072]: <info>  (ttyUSB3) closing serial port...
Jun 27 19:52:36 robot8 kernel: [ 1523.394347] option1 ttyUSB3: option_instat_callback: error -108
Jun 27 19:52:36 robot8 kernel: [ 1523.394493] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
Jun 27 19:52:36 robot8 kernel: [ 1523.394504] option 3-2:1.0: device disconnected
Jun 27 19:52:36 robot8 kernel: [ 1523.394517] qmi_wwan 3-2:1.1 wwan0: unregister 'qmi_wwan' usb-0000:00:14.0-2, WWAN/QMI device
Jun 27 19:52:36 robot8 modem-manager[1072]: <info>  (ttyUSB3) serial port closed
Jun 27 19:52:36 robot8 avahi-daemon[1114]: Withdrawing workstation service for wwan0.
Jun 27 19:52:36 robot8 modem-manager[1072]: <warn>  Couldn't probe for capabilities, probably not a GSM or CDMA modem
Jun 27 19:52:36 robot8 kernel: [ 1523.415188] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
Jun 27 19:52:36 robot8 kernel: [ 1523.415216] option 3-2:1.2: device disconnected
Jun 27 19:52:36 robot8 kernel: [ 1523.416399] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
Jun 27 19:52:36 robot8 kernel: [ 1523.416426] option 3-2:1.3: device disconnected
Jun 27 19:52:36 robot8 kernel: [ 1523.582635] usb 3-2: reset high-speed USB device number 3 using xhci_hcd
Jun 27 19:52:36 robot8 kernel: [ 1523.600011] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88011546cb00
Jun 27 19:52:36 robot8 kernel: [ 1523.600019] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88011546ca80
Jun 27 19:52:36 robot8 kernel: [ 1523.600025] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88011546cec0
Jun 27 19:52:36 robot8 kernel: [ 1523.600030] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88011546cac0
Jun 27 19:52:36 robot8 kernel: [ 1523.600035] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801153eec40
Jun 27 19:52:36 robot8 kernel: [ 1523.600040] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88011546ce40
Jun 27 19:52:36 robot8 kernel: [ 1523.600046] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88010b6d6a40
Jun 27 19:52:36 robot8 kernel: [ 1523.600051] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88011546ce80
Jun 27 19:52:36 robot8 kernel: [ 1523.600056] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88010b6d6640
Jun 27 19:52:36 robot8 kernel: [ 1523.600062] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801153eec00
Jun 27 19:52:36 robot8 kernel: [ 1523.600067] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88010b6d6a80
Jun 27 19:52:36 robot8 kernel: [ 1523.600072] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88010b6d6a00
Jun 27 19:52:36 robot8 kernel: [ 1523.600078] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88010b6d6600
Jun 27 19:52:36 robot8 kernel: [ 1523.600083] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88010b6d6ac0
Jun 27 19:52:36 robot8 kernel: [ 1523.602310] usb 3-2: can't restore configuration #1 (error=-71)
Jun 27 19:52:36 robot8 kernel: [ 1523.602389] usb 3-2: USB disconnect, device number 3
Jun 27 19:52:36 robot8 kernel: [ 1523.730251] usb 3-2: new high-speed USB device number 4 using xhci_hcd
Jun 27 19:52:36 robot8 kernel: [ 1523.749096] usb 3-2: New USB device found, idVendor=12d1, idProduct=140c
Jun 27 19:52:36 robot8 kernel: [ 1523.749104] usb 3-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0
Jun 27 19:52:36 robot8 kernel: [ 1523.749109] usb 3-2: Product: HUAWEI Mobile
Jun 27 19:52:36 robot8 kernel: [ 1523.749114] usb 3-2: Manufacturer: HUAWEI Technology
Jun 27 19:52:36 robot8 kernel: [ 1523.752265] option 3-2:1.0: GSM modem (1-port) converter detected
Jun 27 19:52:36 robot8 kernel: [ 1523.752426] usb 3-2: GSM modem (1-port) converter now attached to ttyUSB1
Jun 27 19:52:36 robot8 kernel: [ 1523.754693] qmi_wwan 3-2:1.1: cdc-wdm0: USB WDM device
Jun 27 19:52:36 robot8 kernel: [ 1523.754894] qmi_wwan 3-2:1.1 wwan0: register 'qmi_wwan' at usb-0000:00:14.0-2, WWAN/QMI device, ca:09:77:02:db:bd
Jun 27 19:52:36 robot8 kernel: [ 1523.755114] option 3-2:1.2: GSM modem (1-port) converter detected
Jun 27 19:52:36 robot8 kernel: [ 1523.755208] usb 3-2: GSM modem (1-port) converter now attached to ttyUSB2
Jun 27 19:52:36 robot8 kernel: [ 1523.755377] option 3-2:1.3: GSM modem (1-port) converter detected
Jun 27 19:52:36 robot8 kernel: [ 1523.755510] usb 3-2: GSM modem (1-port) converter now attached to ttyUSB3
Jun 27 19:52:36 robot8 kernel: [ 1523.756783] scsi20 : usb-storage 3-2:1.4
Jun 27 19:52:36 robot8 kernel: [ 1523.757251] scsi21 : usb-storage 3-2:1.5
Jun 27 19:52:36 robot8 mtp-probe: checking bus 3, device 4: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2"
Jun 27 19:52:36 robot8 mtp-probe: bus: 3, device: 4 was not an MTP device
Jun 27 19:52:36 robot8 modem-manager[1072]: <info>  (ttyUSB1) opening serial port...
Jun 27 19:52:36 robot8 modem-manager[1072]: <warn>  (ttyUSB1): port attributes not fully set
Jun 27 19:52:37 robot8 kernel: [ 1524.755482] scsi 20:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
Jun 27 19:52:37 robot8 kernel: [ 1524.756371] scsi 21:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
Jun 27 19:52:37 robot8 kernel: [ 1524.758976] sr0: scsi-1 drive
Jun 27 19:52:37 robot8 kernel: [ 1524.759323] sr 20:0:0:0: Attached scsi CD-ROM sr0
Jun 27 19:52:37 robot8 kernel: [ 1524.760744] sr 20:0:0:0: Attached scsi generic sg1 type 5
Jun 27 19:52:37 robot8 kernel: [ 1524.760947] sd 21:0:0:0: Attached scsi generic sg2 type 0
Jun 27 19:52:37 robot8 kernel: [ 1524.762988] sd 21:0:0:0: [sdb] Attached SCSI removable disk
Jun 27 19:52:37 robot8 kernel: [ 1524.797436] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 3 ep 14 with no TDs queued?
Jun 27 19:52:38 robot8 pppd[2177]: Exit.
Jun 27 19:52:38 robot8 NetworkManager[1155]: <warn> Activation (ttyUSB0) failed for connection 'Mnet'
Jun 27 19:52:38 robot8 NetworkManager[1155]:    SCPlugin-Ifupdown: devices removed (path: /sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/net/wwan0, iface: wwan0)
Jun 27 19:52:38 robot8 NetworkManager[1155]: <warn> pppd pid 2177 exited with error: A modem hung up the phone
Jun 27 19:52:38 robot8 NetworkManager[1155]: <info> (ttyUSB0): device state change: failed -> unmanaged (reason 'removed') [120 10 36]
Jun 27 19:52:38 robot8 NetworkManager[1155]: <info> (ttyUSB0): deactivating device (reason 'removed') [36]
Jun 27 19:52:38 robot8 dbus[1035]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Jun 27 19:52:38 robot8 dbus[1035]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jun 27 19:52:38 robot8 NetworkManager[1155]: <warn> could not read ppp stats: Нет такого устройства
Jun 27 19:52:38 robot8 NetworkManager[1155]: <warn> DNS: plugin dnsmasq update failed
Jun 27 19:52:38 robot8 NetworkManager[1155]: <info> Removing DNS information from /sbin/resolvconf
Jun 27 19:52:38 robot8 dnsmasq[2196]: setting upstream servers from DBus
Jun 27 19:52:38 robot8 NetworkManager[1155]: <info> (ttyUSB0): cleaning up...
Jun 27 19:52:38 robot8 NetworkManager[1155]: <info> (ttyUSB0): taking down device.
Jun 27 19:52:38 robot8 NetworkManager[1155]: nm_system_iface_set_up: assertion `ifindex > 0' failed
Jun 27 19:52:38 robot8 NetworkManager[1155]: <info> Unmanaged Device found; state CONNECTED forced. (see http://bugs.launchpad.net/bugs/191889)
Jun 27 19:52:38 robot8 NetworkManager[1155]: <info> Unmanaged Device found; state CONNECTED forced. (see http://bugs.launchpad.net/bugs/191889)
Jun 27 19:52:38 robot8 NetworkManager[1155]:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/net/wwan0, iface: wwan0)
Jun 27 19:52:38 robot8 NetworkManager[1155]:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/net/wwan0, iface: wwan0): no ifupdown configuration found.
Jun 27 19:52:38 robot8 NetworkManager[1155]:    SCPlugin-Ifupdown: devices removed (path: /sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/net/wwan0, iface: wwan0)
Jun 27 19:52:38 robot8 NetworkManager[1155]:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/net/wwan0, iface: wwan0)
Jun 27 19:52:38 robot8 NetworkManager[1155]:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/net/wwan0, iface: wwan0): no ifupdown configuration found.
Jun 27 19:52:41 robot8 modem-manager[1072]: <info>  (ttyUSB1) closing serial port...
Jun 27 19:52:41 robot8 modem-manager[1072]: <info>  (ttyUSB1) serial port closed
Jun 27 19:52:41 robot8 modem-manager[1072]: <info>  (Huawei): GSM modem /sys/devices/pci0000:00/0000:00:14.0/usb3/3-2 claimed port ttyUSB1
Jun 27 19:52:42 robot8 modem-manager[1072]: <info>  (ttyUSB2) opening serial port...
Jun 27 19:52:42 robot8 modem-manager[1072]: <warn>  (ttyUSB2): port attributes not fully set
Jun 27 19:52:54 robot8 modem-manager[1072]: <info>  (ttyUSB2) closing serial port...
Jun 27 19:52:54 robot8 modem-manager[1072]: <info>  (ttyUSB2) serial port closed
Jun 27 19:52:54 robot8 modem-manager[1072]: <info>  (ttyUSB2) opening serial port...
Jun 27 19:52:54 robot8 modem-manager[1072]: <info>  (ttyUSB2) closing serial port...
Jun 27 19:52:54 robot8 modem-manager[1072]: <info>  (ttyUSB2) serial port closed
Jun 27 19:52:54 robot8 modem-manager[1072]: <info>  (Huawei): GSM modem /sys/devices/pci0000:00/0000:00:14.0/usb3/3-2 claimed port ttyUSB2
Jun 27 19:52:54 robot8 modem-manager[1072]: <error> Failed to organize modem ports: (0) Failed to find primary port.
Jun 27 19:52:54 robot8 modem-manager[1072]: marshal_object: assertion `g_variant_is_object_path (path)' failed
Jun 27 19:52:54 robot8 modem-manager[1072]: failed to marshal parameter 1 for signal DeviceRemoved
Jun 27 20:04:35 robot8 NetworkManager[1155]: <info> sleep requested (sleeping: no  enabled: yes)
Jun 27 20:04:35 robot8 NetworkManager[1155]: <info> sleeping or disabling...
Jun 27 20:04:35 robot8 NetworkManager[1155]: <info> (wlan0): device state change: unavailable -> unmanaged (reason 'sleeping') [20 10 37]
Jun 27 20:04:35 robot8 NetworkManager[1155]: <info> (eth0): device state change: unavailable -> unmanaged (reason 'sleeping') [20 10 37]
Jun 27 20:04:35 robot8 NetworkManager[1155]: <info> (eth0): cleaning up...
Jun 27 20:04:35 robot8 NetworkManager[1155]: <info> (eth0): taking down device.
Jun 27 20:04:35 robot8 anacron[3037]: Anacron 2.3 started on 2013-06-27
Jun 27 20:04:35 robot8 anacron[3037]: Will run job `cron.daily' in 5 min.
Jun 27 20:04:35 robot8 anacron[3037]: Jobs will be executed sequentially
Jun 27 20:04:36 robot8 NetworkManager[1155]: <info> wake requested (sleeping: yes  enabled: yes)
Jun 27 20:04:36 robot8 NetworkManager[1155]: <info> waking up and re-enabling...
Jun 27 20:04:36 robot8 NetworkManager[1155]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jun 27 20:04:36 robot8 NetworkManager[1155]: <info> (wlan0): bringing up device.
Jun 27 20:04:36 robot8 NetworkManager[1155]: <info> (wlan0): deactivating device (reason 'managed') [2]
Jun 27 20:04:36 robot8 NetworkManager[1155]: <info> Unmanaged Device found; state CONNECTED forced. (see http://bugs.launchpad.net/bugs/191889)
Jun 27 20:04:36 robot8 NetworkManager[1155]: <info> Unmanaged Device found; state CONNECTED forced. (see http://bugs.launchpad.net/bugs/191889)
Jun 27 20:04:36 robot8 NetworkManager[1155]: <info> (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jun 27 20:04:36 robot8 NetworkManager[1155]: <info> (eth0): bringing up device.
Jun 27 20:04:36 robot8 NetworkManager[1155]: <info> (eth0): preparing device.
Jun 27 20:04:36 robot8 NetworkManager[1155]: <info> (eth0): deactivating device (reason 'managed') [2]
Jun 27 20:04:36 robot8 kernel: [ 2242.884552] r8169 0000:03:00.2 eth0: link down
Jun 27 20:04:36 robot8 kernel: [ 2242.884605] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jun 27 20:04:36 robot8 kernel: [ 2242.885881] PM: Syncing filesystems ... done.
Jun 27 20:04:43 robot8 kernel: [ 2243.225508] Freezing user space processes ... (elapsed 0.01 seconds) done.
Jun 27 20:04:43 robot8 kernel: [ 2243.241314] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Jun 27 20:04:43 robot8 kernel: [ 2243.257825] Suspending console(s) (use no_console_suspend to debug)
Jun 27 20:04:43 robot8 kernel: [ 2243.258101] option1 ttyUSB1: option_instat_callback: error -2
Jun 27 20:04:43 robot8 kernel: [ 2243.258219] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Jun 27 20:04:43 robot8 kernel: [ 2243.264836] sd 0:0:0:0: [sda] Stopping disk
Jun 27 20:04:43 robot8 kernel: [ 2243.896570] PM: suspend of devices complete after 639.363 msecs
Jun 27 20:04:43 robot8 kernel: [ 2243.896736] PM: late suspend of devices complete after 0.164 msecs
Jun 27 20:04:43 robot8 kernel: [ 2243.896941] pcieport 0000:00:1c.3: System wakeup enabled by ACPI
Jun 27 20:04:43 robot8 kernel: [ 2243.912552] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
Jun 27 20:04:43 robot8 kernel: [ 2243.928612] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
Jun 27 20:04:43 robot8 kernel: [ 2243.960373] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
Jun 27 20:04:43 robot8 kernel: [ 2243.976388] PM: noirq suspend of devices complete after 79.742 msecs
Jun 27 20:04:43 robot8 kernel: [ 2243.976841] ACPI: Preparing to enter system sleep state S3
Jun 27 20:04:43 robot8 kernel: [ 2244.032539] PM: Saving platform NVS memory
Jun 27 20:04:43 robot8 kernel: [ 2244.126892] Disabling non-boot CPUs ...
Jun 27 20:04:43 robot8 kernel: [ 2244.127085] Broke affinity for irq 23
Jun 27 20:04:43 robot8 kernel: [ 2244.127087] Broke affinity for irq 40
Jun 27 20:04:43 robot8 kernel: [ 2244.128106] smpboot: CPU 1 is now offline
Jun 27 20:04:43 robot8 kernel: [ 2244.128520] Extended CMOS year: 2000
Jun 27 20:04:43 robot8 kernel: [ 2244.129594] ACPI: Low-level resume complete
Jun 27 20:04:43 robot8 kernel: [ 2244.129638] PM: Restoring platform NVS memory
Jun 27 20:04:43 robot8 kernel: [ 2244.132458] Extended CMOS year: 2000
Jun 27 20:04:43 robot8 kernel: [ 2244.132517] Enabling non-boot CPUs ...
Jun 27 20:04:43 robot8 kernel: [ 2244.132592] smpboot: Booting Node 0 Processor 1 APIC 0x2
Jun 27 20:04:43 robot8 kernel: [ 2244.145973] CPU1 is up
Jun 27 20:04:43 robot8 kernel: [ 2244.150929] ACPI: Waking up from system sleep state S3
Jun 27 20:04:43 robot8 kernel: [ 2244.236028] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
Jun 27 20:04:43 robot8 kernel: [ 2244.267963] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
Jun 27 20:04:43 robot8 kernel: [ 2244.299924] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
Jun 27 20:04:43 robot8 kernel: [ 2244.364005] PM: noirq resume of devices complete after 159.616 msecs
Jun 27 20:04:43 robot8 kernel: [ 2244.364145] PM: early resume of devices complete after 0.115 msecs
Jun 27 20:04:43 robot8 kernel: [ 2244.364179] i915 0000:00:02.0: setting latency timer to 64
Jun 27 20:04:43 robot8 kernel: [ 2244.364229] xhci_hcd 0000:00:14.0: setting latency timer to 64
Jun 27 20:04:43 robot8 kernel: [ 2244.364269] usb usb3: root hub lost power or was reset
Jun 27 20:04:43 robot8 kernel: [ 2244.364271] usb usb4: root hub lost power or was reset
Jun 27 20:04:43 robot8 kernel: [ 2244.364320] xhci_hcd 0000:00:14.0: Slot 3 endpoint 2 not removed from BW list!
Jun 27 20:04:43 robot8 kernel: [ 2244.364324] xhci_hcd 0000:00:14.0: Slot 3 endpoint 6 not removed from BW list!
Jun 27 20:04:43 robot8 kernel: [ 2244.364470] xhci_hcd 0000:00:14.0: irq 40 for MSI/MSI-X
Jun 27 20:04:43 robot8 kernel: [ 2244.364570] mei 0000:00:16.0: irq 44 for MSI/MSI-X
Jun 27 20:04:43 robot8 kernel: [ 2244.364916] ehci-pci 0000:00:1a.0: setting latency timer to 64
Jun 27 20:04:43 robot8 kernel: [ 2244.364926] usb usb1: root hub lost power or was reset
Jun 27 20:04:43 robot8 kernel: [ 2244.368804] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
Jun 27 20:04:43 robot8 kernel: [ 2244.368869] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
Jun 27 20:04:43 robot8 kernel: [ 2244.369152] ehci-pci 0000:00:1d.0: setting latency timer to 64
Jun 27 20:04:43 robot8 kernel: [ 2244.369189] usb usb2: root hub lost power or was reset
Jun 27 20:04:43 robot8 kernel: [ 2244.373070] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
Jun 27 20:04:43 robot8 kernel: [ 2244.373093] ahci 0000:00:1f.2: setting latency timer to 64
Jun 27 20:04:43 robot8 kernel: [ 2244.373375] pcieport 0000:00:1c.3: System wakeup disabled by ACPI
Jun 27 20:04:43 robot8 kernel: [ 2244.462121] r8169 0000:03:00.2 eth0: link down
Jun 27 20:04:43 robot8 kernel: [ 2244.695411] usb 1-1: reset high-speed USB device number 2 using ehci-pci
Jun 27 20:04:43 robot8 kernel: [ 2244.939109] usb 2-1: reset high-speed USB device number 2 using ehci-pci
Jun 27 20:04:43 robot8 kernel: [ 2245.143149] usb 1-1.2: reset high-speed USB device number 3 using ehci-pci
Jun 27 20:04:43 robot8 kernel: [ 2245.738358] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
Jun 27 20:04:43 robot8 kernel: [ 2246.988654] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jun 27 20:04:43 robot8 kernel: [ 2246.990454] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Jun 27 20:04:43 robot8 kernel: [ 2247.140382] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
Jun 27 20:04:43 robot8 kernel: [ 2247.140387] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Jun 27 20:04:43 robot8 kernel: [ 2247.176059] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Jun 27 20:04:43 robot8 kernel: [ 2247.176195] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
Jun 27 20:04:43 robot8 kernel: [ 2247.176199] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Jun 27 20:04:43 robot8 kernel: [ 2247.177931] ata1.00: configured for UDMA/133
Jun 27 20:04:43 robot8 kernel: [ 2247.192551] sd 0:0:0:0: [sda] Starting disk
Jun 27 20:04:43 robot8 kernel: [ 2247.206221] PM: resume of devices complete after 2845.474 msecs
Jun 27 20:04:43 robot8 kernel: [ 2247.206498] Restarting tasks ... done.
Jun 27 20:04:43 robot8 kernel: [ 2247.215314] usb 3-2: USB disconnect, device number 4
Jun 27 20:04:43 robot8 kernel: [ 2247.215664] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
Jun 27 20:04:43 robot8 kernel: [ 2247.215685] option 3-2:1.0: device disconnected
Jun 27 20:04:43 robot8 kernel: [ 2247.215749] qmi_wwan 3-2:1.1 wwan0: unregister 'qmi_wwan' usb-0000:00:14.0-2, WWAN/QMI device
Jun 27 20:04:43 robot8 kernel: [ 2247.228887] video LNXVIDEO:00: Restoring backlight state
Jun 27 20:04:43 robot8 kernel: [ 2247.232547] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
Jun 27 20:04:43 robot8 kernel: [ 2247.232563] option 3-2:1.2: device disconnected
Jun 27 20:04:43 robot8 kernel: [ 2247.232640] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
Jun 27 20:04:43 robot8 kernel: [ 2247.232651] option 3-2:1.3: device disconnected
Jun 27 20:04:43 robot8 kernel: [ 2247.236560] xHCI xhci_drop_endpoint called with unaddressed device
Jun 27 20:04:43 robot8 kernel: [ 2247.236565] xHCI xhci_drop_endpoint called with unaddressed device
Jun 27 20:04:43 robot8 kernel: [ 2247.236566] xHCI xhci_drop_endpoint called with unaddressed device
Jun 27 20:04:43 robot8 kernel: [ 2247.236568] xHCI xhci_drop_endpoint called with unaddressed device
Jun 27 20:04:43 robot8 kernel: [ 2247.236569] xHCI xhci_drop_endpoint called with unaddressed device
Jun 27 20:04:43 robot8 kernel: [ 2247.236571] xHCI xhci_drop_endpoint called with unaddressed device
Jun 27 20:04:43 robot8 kernel: [ 2247.236572] xHCI xhci_drop_endpoint called with unaddressed device
Jun 27 20:04:43 robot8 kernel: [ 2247.236573] xHCI xhci_drop_endpoint called with unaddressed device
Jun 27 20:04:43 robot8 kernel: [ 2247.236575] xHCI xhci_drop_endpoint called with unaddressed device
Jun 27 20:04:43 robot8 kernel: [ 2247.236576] xHCI xhci_drop_endpoint called with unaddressed device
Jun 27 20:04:43 robot8 kernel: [ 2247.236578] xHCI xhci_drop_endpoint called with unaddressed device
Jun 27 20:04:43 robot8 kernel: [ 2247.236579] xHCI xhci_drop_endpoint called with unaddressed device
Jun 27 20:04:43 robot8 kernel: [ 2247.236581] xHCI xhci_drop_endpoint called with unaddressed device
Jun 27 20:04:43 robot8 kernel: [ 2247.236582] xHCI xhci_drop_endpoint called with unaddressed device
Jun 27 20:04:43 robot8 kernel: [ 2247.236584] xHCI xhci_check_bandwidth called with unaddressed device
Jun 27 20:04:43 robot8 kernel: [ 2247.236656] xHCI xhci_free_dev called with unaddressed device
Jun 27 20:04:43 robot8 avahi-daemon[1114]: Withdrawing workstation service for wwan0.
Jun 27 20:04:43 robot8 NetworkManager[1155]:    SCPlugin-Ifupdown: devices removed (path: /sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/net/wwan0, iface: wwan0)
Jun 27 20:04:44 robot8 kernel: [ 2247.492068] usb 3-2: new high-speed USB device number 5 using xhci_hcd
Jun 27 20:04:44 robot8 kernel: [ 2247.510581] usb 3-2: New USB device found, idVendor=12d1, idProduct=1446
Jun 27 20:04:44 robot8 kernel: [ 2247.510590] usb 3-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0
Jun 27 20:04:44 robot8 kernel: [ 2247.510596] usb 3-2: Product: HUAWEI Mobile
Jun 27 20:04:44 robot8 kernel: [ 2247.510601] usb 3-2: Manufacturer: HUAWEI Technology
Jun 27 20:04:44 robot8 mtp-probe: checking bus 3, device 5: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2"
Jun 27 20:04:44 robot8 mtp-probe: bus: 3, device: 5 was not an MTP device
Jun 27 20:04:44 robot8 kernel: [ 2247.513240] scsi22 : usb-storage 3-2:1.0
Jun 27 20:04:44 robot8 kernel: [ 2247.513394] scsi23 : usb-storage 3-2:1.1
Jun 27 20:04:44 robot8 anacron[3386]: Anacron 2.3 started on 2013-06-27
Jun 27 20:04:44 robot8 anacron[3386]: Will run job `cron.daily' in 5 min.
Jun 27 20:04:44 robot8 anacron[3386]: Jobs will be executed sequentially
Jun 27 20:04:44 robot8 acpid: client 1622[0:0] has disconnected
Jun 27 20:04:44 robot8 acpid: client connected from 1622[0:0]
Jun 27 20:04:44 robot8 acpid: 1 client rule loaded
Jun 27 20:04:45 robot8 kernel: [ 2248.512310] scsi 22:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
Jun 27 20:04:45 robot8 kernel: [ 2248.512723] scsi 23:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
Jun 27 20:04:45 robot8 kernel: [ 2248.515519] sr0: scsi-1 drive
Jun 27 20:04:45 robot8 kernel: [ 2248.516001] sr 22:0:0:0: Attached scsi CD-ROM sr0
Jun 27 20:04:45 robot8 kernel: [ 2248.517472] sr 22:0:0:0: Attached scsi generic sg1 type 5
Jun 27 20:04:45 robot8 kernel: [ 2248.518434] sd 23:0:0:0: Attached scsi generic sg2 type 0
Jun 27 20:04:45 robot8 kernel: [ 2248.521715] sd 23:0:0:0: [sdb] Attached SCSI removable disk
Jun 27 20:04:45 robot8 usb_modeswitch: switching device 12d1:1446 on 003/005

Решилась проблема переводом модема в режим "Модем + кардРидер" при помощи программы minicom

[asergrisa]

Возможно что это сейчас уже и не нужно, но я напишу как я подключал модем в Ubuntu 13.04.
Я тоже живу в Молдове и пользуюсь интернетом от Unite и у меня такой-же модем, который замечательно работает в Ubuntu 12.04, но не работает ни в 12.10, ни в 13.04. Я долго искал как запустить этот модем и нашёл рабочий метод.

1) Устанавливаем wvdial (или скачиваем libwvstreams4.6-base, libwvstreams4.6-extras, libuniconf4.6, wvdial и устанавливаем через dpkg -i или как либо иначе в этом же порядке)
2) Запускаем "sudo wvdialconf" в консоли
3) Модифицируем файл /etc/wvdial.conf из под рута ( sudo nano /etc/wvdial.conf ), изменяем строчки
; Phone =
; Password =
; Username =
на
Phone = *99#
Password = unite
Username = unite
( я не знаю правильно ли это, но у меня так работает)
4) Запускаем sudo wvdial  и если через несколько секунд появляется интернет и всё работает тогда нажимаем Ctrl+C, закрываем терминал, нажимаем Alt+F2 и вводим "gksu wvdial" ( или kdesu если у вас Kubuntu) и всё, интернет должен работать ( у меня именно так всё и работает ).

[grisahoros]

Недавно нашёл более лёгкий метод. Нужно добавит следующий ppa

sudo add-apt-repository ppa:network-manager/trunk

обновится и установить mobile-broadband-provider-info

sudo apt-get install mobile-broadband-provider-info

и после перезагрузки интернет будет работать без wvdial