«[РЕШЕНО]» Флэш-накопитель RB19 работает.

[phoenix.and]

Флешка на 16 Гб. и хард диск на 1 Т/б не работает.
web-site Флэшки: http://www.adata.com.tw/ru/product_show.php?ProductNo=AR19ZZZOR

Мой дистрибутив:  Ubuntu 9.04 - jaunty jackalope
Ядро:                      Linux 2.6.28-13-generic

вывод команды:     lsusb      
Bus 001 Device 003: ID 05e1:0501 Syntek Semiconductor Co., Ltd WebCam, Chipset DC-1125 similar to 174f:a311 - Asus F2F, F2J, F3J, F3T, G1, Z53JA
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 046d:c016 Logitech, Inc. M-UV69a/HP M-UV96 Optical Wheel Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

вывод команды:     dmesg | tail

[ 3383.553076] usb 1-2: new high speed USB device using ehci_hcd and address 5
[ 3383.689225] usb 1-2: configuration #1 chosen from 1 choice
[ 3383.696203] scsi3 : SCSI emulation for USB Mass Storage devices
[ 3383.698249] usb-storage: device found at 5
[ 3383.698255] usb-storage: waiting for device to settle before scanning
[ 3388.696321] usb-storage: device scan complete
[ 3395.101109] usb 1-2: reset high speed USB device using ehci_hcd and address 5
[ 3410.212069] usb 1-2: device descriptor read/64, error -110
[ 3425.428071] usb 1-2: device descriptor read/64, error -110
[ 3425.648060] usb 1-2: reset high speed USB device using ehci_hcd and address 5
[ 3440.757102] usb 1-2: device descriptor read/64, error -110
[ 3455.973084] usb 1-2: device descriptor read/64, error -110
[ 3456.189085] usb 1-2: reset high speed USB device using ehci_hcd and address 5
[ 3466.596058] usb 1-2: device not accepting address 5, error -110
[ 3466.708182] usb 1-2: reset high speed USB device using ehci_hcd and address 5
[ 3477.116059] usb 1-2: device not accepting address 5, error -110
[ 3477.116418] usb 1-2: USB disconnect, address 5
[ 3477.117407] scsi 3:0:0:0: Device offlined - not ready after error recovery
[ 3477.349023] usb 1-2: new high speed USB device using ehci_hcd and address 6
[ 3492.463882] usb 1-2: device descriptor read/64, error -110
[ 3507.676060] usb 1-2: device descriptor read/64, error -110
[ 3507.892075] usb 1-2: new high speed USB device using ehci_hcd and address 7
[ 3523.006800] usb 1-2: device descriptor read/64, error -110
[ 3538.224063] usb 1-2: device descriptor read/64, error -110
[ 3538.440068] usb 1-2: new high speed USB device using ehci_hcd and address 8
[ 3548.848057] usb 1-2: device not accepting address 8, error -110
[ 3548.960072] usb 1-2: new high speed USB device using ehci_hcd and address 9
[ 3559.368072] usb 1-2: device not accepting address 9, error -110
[ 3559.368103] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 3559.692074] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 3574.805090] usb 2-2: device descriptor read/64, error -110
[ 3590.024065] usb 2-2: device descriptor read/64, error -110
[ 3590.240088] usb 2-2: new full speed USB device using uhci_hcd and address 3
[ 3605.352060] usb 2-2: device descriptor read/64, error -110

Кстати у меня есть и X Craft 250, так он работает хорошо.
http://www.coolermaster.com/products/product.php?language=en&act=detail&tbcate=32&id=33

[PuFig]

Для флешки могу предложить такой способ лечения, мне помог.
в файле rc.local

Код: [Выделить]

sudo nano /etc/rc.local
добавляем строку

Код: [Выделить]

echo 20 > /sys/module/scsi_mod/parameters/inq_timeout
сохраняем и перезагружаемся, после перезагрузки пробуем вставить флешку. У меня она монтируется в течении 7-10 секунд.

P.S. Вообще возникает ощущение, что тайм-ауты прописывались для чрезвычайно дорогого и безумно быстрого железа 

[phoenix.and]

Спасибо!!!  
А можно узнать откуда ты такой способ раздобыл?