[ 1.604446] ACPI: Power Button (FF) [PWRF]
[ 1.604490] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.604499] ACPI: Power Button (CM) [PWRB]
[ 1.604718] processor ACPI_CPU:00: registered as cooling_device0
[ 1.608802] isapnp: Scanning for PnP cards...
[ 1.962222] isapnp: No Plug & Play device found
[ 1.963315] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.963400] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.963701] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.964344] brd: module loaded
[ 1.964613] loop: module loaded
[ 1.964677] Fixed MDIO Bus: probed
[ 1.964682] PPP generic driver version 2.4.2
[ 1.964732] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.964756] Driver 'sd' needs updating - please use bus_type methods
[ 1.964764] Driver 'sr' needs updating - please use bus_type methods
[ 1.964926] sata_nv 0000:00:08.0: version 3.5
[ 1.965272] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 1.965283] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 1.965331] sata_nv 0000:00:08.0: setting latency timer to 64
[ 1.965424] scsi0 : sata_nv
[ 1.965510] scsi1 : sata_nv
[ 1.965671] ata1: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 23
[ 1.965673] ata2: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 23
[ 2.432034] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.441110] ata1.00: ATA-8: WDC WD3200AAKS-00L6A0, 01.03E01, max UDMA/133
[ 2.441113] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.449131] ata1.00: configured for UDMA/133
[ 2.770307] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 01.0 PQ: 0 ANSI: 5
[ 2.770384] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 2.770399] sd 0:0:0:0: [sda] Write Protect is off
[ 2.770401] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.770422] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.770477] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 2.770488] sd 0:0:0:0: [sda] Write Protect is off
[ 2.770491] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.770510] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.770514] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 2.820125] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.820170] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.820249] pata_amd 0000:00:06.0: version 0.3.10
[ 2.820289] pata_amd 0000:00:06.0: setting latency timer to 64
[ 2.820368] scsi2 : pata_amd
[ 2.820416] scsi3 : pata_amd
[ 2.821252] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 2.821254] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 3.160466] ata3.00: ATA-6: ST380011A, 8.01, max UDMA/100
[ 3.160468] ata3.00: 156301488 sectors, multi 16: LBA48
[ 3.160495] ata3.01: ATAPI: _NEC DVD_RW ND-3500AG, 2.16, max UDMA/33
[ 3.160516] ata3: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x15)
[ 3.160521] ata3: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x15)
[ 3.176406] ata3.00: configured for UDMA/100
[ 3.192283] ata3.01: configured for UDMA/33
[ 3.192903] ata4: port disabled. ignoring.
[ 3.192975] scsi 2:0:0:0: Direct-Access ATA ST380011A 8.01 PQ: 0 ANSI: 5
[ 3.193053] sd 2:0:0:0: [sdb] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 3.193067] sd 2:0:0:0: [sdb] Write Protect is off
[ 3.193069] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.193089] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.193139] sd 2:0:0:0: [sdb] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 3.193151] sd 2:0:0:0: [sdb] Write Protect is off
[ 3.193153] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.193172] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.193176] sdb: sdb1 sdb2 < sdb5 >
[ 3.211979] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 3.212023] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 3.212799] scsi 2:0:1:0: CD-ROM _NEC DVD_RW ND-3500AG 2.16 PQ: 0 ANSI: 5
[ 3.214852] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 3.214855] Uniform CD-ROM driver Revision: 3.20
[ 3.214925] sr 2:0:1:0: Attached scsi CD-ROM sr0
[ 3.214959] sr 2:0:1:0: Attached scsi generic sg2 type 5
[ 3.215382] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.215739] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 3.215749] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[ 3.215767] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 3.215770] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 3.215824] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 3.215851] ehci_hcd 0000:00:02.1: debug port 1
[ 3.215854] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 3.215873] ehci_hcd 0000:00:02.1: irq 22, io mem 0xdfefec00
[ 3.224018] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 3.224071] usb usb1: configuration #1 chosen from 1 choice
[ 3.224094] hub 1-0:1.0: USB hub found
[ 3.224102] hub 1-0:1.0: 8 ports detected
[ 3.224191] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.224510] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
[ 3.224516] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21
[ 3.224525] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 3.224528] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 3.224562] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 3.224583] ohci_hcd 0000:00:02.0: irq 21, io mem 0xdfeff000
[ 3.282041] usb usb2: configuration #1 chosen from 1 choice
[ 3.282069] hub 2-0:1.0: USB hub found
[ 3.282083] hub 2-0:1.0: 8 ports detected
[ 3.282157] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.282235] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 3.282582] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.282587] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.282682] mice: PS/2 mouse device common for all mice
[ 3.282817] rtc_cmos 00:02: RTC can wake from S4
[ 3.282850] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 3.282887] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 3.282940] device-mapper: uevent: version 1.0.3
[ 3.283037] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 3.283079] device-mapper: multipath: version 1.0.5 loaded
[ 3.283082] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.283144] EISA: Probing bus 0 at eisa.0
[ 3.283152] Cannot allocate resource for EISA slot 2
[ 3.283168] EISA: Detected 0 cards.
[ 3.283191] cpuidle: using governor ladder
[ 3.283193] cpuidle: using governor menu
[ 3.283646] TCP cubic registered
[ 3.283732] NET: Registered protocol family 10
[ 3.284113] lo: Disabled Privacy Extensions
[ 3.284392] NET: Registered protocol family 17
[ 3.284406] Bluetooth: L2CAP ver 2.11
[ 3.284407] Bluetooth: L2CAP socket layer initialized
[ 3.284410] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.284411] Bluetooth: SCO socket layer initialized
[ 3.284431] Bluetooth: RFCOMM socket layer initialized
[ 3.284438] Bluetooth: RFCOMM TTY layer initialized
[ 3.284439] Bluetooth: RFCOMM ver 1.10
[ 3.284459] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00)
[ 3.300724] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
[ 3.300790] Using IPI No-Shortcut mode
[ 3.300861] registered taskstats version 1
[ 3.300967] Magic number: 5:803:603
[ 3.301026] pci_link PNP0C0F:0f: hash matches
[ 3.301076] rtc_cmos 00:02: setting system clock to 2009-08-19 22:34:04 UTC (1250721244)
[ 3.301079] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.301081] EDD information not available.
[ 3.301400] Freeing unused kernel memory: 532k freed
[ 3.301523] Write protecting the kernel text: 4116k
[ 3.301564] Write protecting the kernel read-only data: 1524k
[ 3.331831] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 3.374653] compcache: Compressed swap size set to: 353680 KB
[ 3.375183] TLSF: pool: f7d5f000, init_size=16384, max_size=0, grow_size=16384
[ 3.675842] Floppy drive(s): fd0 is 1.44M
[ 3.696074] FDC 0 is a post-1991 82077
[ 3.732934] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
[ 3.732948] ohci1394 0000:01:06.0: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19
[ 3.785723] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[dffff800-dfffffff] Max Packet=[2] IR/IT contexts=[8/8]
[ 3.792697] ohci1394: fw-host0: Serial EEPROM has suspicious values, attempting to set max_packet_size to 512 bytes
[ 3.811811] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 3.812260] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[ 3.812273] forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20
[ 3.812277] forcedeth 0000:00:07.0: setting latency timer to 64
[ 4.107772] Adding 353676k swap on /dev/ramzswap0. Priority:100 extents:1 across:353676k
[ 4.332799] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x1374 @ 1, addr 00:1b:fc:32:08:97
[ 4.332804] forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 4.722332] PM: Starting manual resume from disk
[ 4.722336] PM: Resume from partition 8:5
[ 4.722338] PM: Checking hibernation image.
[ 4.722504] PM: Resume from disk failed.
[ 4.754026] EXT4-fs: barriers enabled
[ 4.764028] kjournald2 starting. Commit interval 5 seconds
[ 4.764037] EXT4-fs: delayed allocation enabled
[ 4.764039] EXT4-fs: file extents enabled
[ 4.765625] EXT4-fs: mballoc enabled
[ 4.765629] EXT4-fs: mounted filesystem with ordered data mode.
[ 5.076110] ieee1394: Host added: ID:BUS[0-00:1023] GUID[4d5a900003000000]
[ 8.363922] udev: starting version 141
[ 8.462674] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600
[ 8.462711] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700
[ 8.510669] parport_pc 00:06: reported by Plug and Play ACPI
[ 8.510714] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 8.876538] Linux agpgart interface v0.103
[ 9.163703] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 9.436126] nvidia: module license 'NVIDIA' taints kernel.
[ 9.702932] ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 23
[ 9.702939] nvidia 0000:00:0d.0: PCI INT A -> Link[LMC9] -> GSI 23 (level, low) -> IRQ 23
[ 9.702946] nvidia 0000:00:0d.0: setting latency timer to 64
[ 9.704317] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
[ 9.709194] ppdev: user-space parallel port driver
[ 9.793377] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 9.833110] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 9.833117] HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[ 9.833189] HDA Intel 0000:00:05.0: setting latency timer to 64
[ 10.255353] psmouse serio1: ID: 10 00 64<6>lp0: using parport0 (interrupt-driven).
[ 10.600218] Adding 1461872k swap on /dev/sda5. Priority:-1 extents:1 across:1461872k
[ 10.793528] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 11.142566] EXT4 FS on sda6, internal journal on sda6:8
[ 11.886064] EXT4-fs: barriers enabled
[ 11.895701] kjournald2 starting. Commit interval 5 seconds
[ 11.895905] EXT4 FS on sda7, internal journal on sda7:8
[ 11.895908] EXT4-fs: delayed allocation enabled
[ 11.895909] EXT4-fs: file extents enabled
[ 11.897059] EXT4-fs: mballoc enabled
[ 11.897064] EXT4-fs: mounted filesystem with ordered data mode.
[ 12.073800] type=1505 audit(1250706853.270:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2019
[ 12.129475] type=1505 audit(1250706853.326:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2023
[ 12.129635] type=1505 audit(1250706853.326:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2023
[ 12.129684] type=1505 audit(1250706853.326:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2023
[ 12.129728] type=1505 audit(1250706853.326:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2023
[ 12.168355] type=1505 audit(1250706853.366:7): operation="profile_load" name="/usr/bin/freshclam" name2="default" pid=2028
[ 12.202275] type=1505 audit(1250706853.398:
: operation="profile_load" name="/usr/sbin/clamd" name2="default" pid=2032
[ 12.360862] type=1505 audit(1250706853.558:9): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2036
[ 12.361087] type=1505 audit(1250706853.558:10): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2036
[ 12.390872] type=1505 audit(1250706853.586:11): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=2040
[ 19.074230] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.074233] Bluetooth: BNEP filters: protocol multicast
[ 19.101132] Bridge firewalling registered
[ 23.802703] forcedeth 0000:00:07.0: irq 2300 for MSI/MSI-X
[ 33.960011] eth0: no IPv6 routers present
Тема: Проблемв установки принтера HP (Прочитано 2096 раз)
