Sony Ericsson Edge Pc Card Gc86 в Kubuntu

[ZemieL]

День добрый.
Есть трабл с этим модемом, не хочет подниматься, но очень надо  
Ноутбук - Dell Latitude D630
Модем - Sony Ericsson Edge Pc Card Gc86
Ядро - 2.6.28-15-generic

# lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 003: ID 0b97:7772 O2 Micro, Inc. OZ776 CCID Smartcard Reader
Bus 007 Device 002: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 0458:0031 KYE Systems Corp. (Mouse Systems)
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

# dmesg | tail
[ 3809.296200] ata1: soft resetting link
[ 3809.481658] ata1.00: configured for PIO0
[ 3809.482931] ata1: EH complete
[ 3842.999867] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0
[ 3843.047033] serial 0000:04:00.0: PCI INT A disabled
[ 3858.200270] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 3858.200334] pci 0000:04:00.0: reg 10 io port: [0x00-0xff]
[ 3858.202766] serial 0000:04:00.0: enabling device (0000 -> 0001)
[ 3858.202783] serial 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3858.203064] 0000:04:00.0: ttyS1 at I/O 0x2000 (irq = 19) is a 16550A

[Alchemist_26081983]

Для начала смотрим тут

Код: [Выделить]

lspci -v|less
у меня вот кусочек

(Нажмите, чтобы показать/скрыть)

03:00.0 Serial controller: Broadcom Corporation EDGE/GPRS data and 802.11b/g combo cardbus [GC89] (rev 03) (prog-if 02)
        Subsystem: Device 18de:0009
        Flags: fast devsel, IRQ 20
        I/O ports at 1000 [size=256]
        Kernel driver in use: serial

так же смотрим

Код: [Выделить]

lshal|less

(Нажмите, чтобы показать/скрыть)

udi = '/org/freedesktop/Hal/devices/pci_14e4_4344'
  info.linux.driver = 'serial'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1180_476'  (string)
  info.product = 'EDGE/GPRS data and 802.11b/g combo cardbus [GC89]'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_14e4_4344'  (string)
  info.vendor = 'Broadcom Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:02:04.0/0000:03:00.0'  (string)
  pci.device_class = 7  (0x7)  (int)
  pci.device_protocol = 2  (0x2)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:02:04.0/0000:03:00.0'  (string)
  pci.product = 'EDGE/GPRS data and 802.11b/g combo cardbus [GC89]'  (string)
  pci.product_id = 17220  (0x4344)  (int)
  pci.subsys_product_id = 9  (0x9)  (int)
  pci.subsys_vendor_id = 6366  (0x18de)  (int)
  pci.vendor = 'Broadcom Corporation'  (string)
  pci.vendor_id = 5348  (0x14e4)  (int)

udi = '/org/freedesktop/Hal/devices/pci_14e4_4344_serial_platform_0'
  access_control.file = '/dev/ttyS0'  (string)
  access_control.type = 'modem'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'serial', 'access_control'} (string list)
  info.category = 'serial'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_14e4_4344'  (string)
  info.product = 'EDGE/GPRS data and 802.11b/g combo cardbus [GC89]'  (string)
  info.subsystem = 'tty'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_14e4_4344_serial_platform_0'  (string)
  linux.device_file = '/dev/ttyS0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'tty'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.4/0000:02:04.0/0000:03:00.0/tty/ttyS0'  (string)
  serial.device = '/dev/ttyS0'  (string)
  serial.originating_device = '/org/freedesktop/Hal/devices/pci_14e4_4344'  (string)
  serial.port = 0  (0x0)  (int)
  serial.type = 'platform'  (string)

И вот строчки которые показывают что девайc определился и "что-то" работает

Код: [Выделить]

access_control.file = '/dev/ttyS0'  (string)
  access_control.type = 'modem'  (string)
однако дозвонится на него нельзя и pppd выдает следующее

(Нажмите, чтобы показать/скрыть)

--> Ignoring malformed input line: ";Do NOT edit this file by hand!"
--> WvDial: Internet dialer version 1.60
--> Cannot set information for serial port.
--> Initializing modem.
--> Sending: ATZ
 [1e]0
--> Sending: ATQ0
  [18][7f]
--> Re-Sending: ATZ
 [1e]0
--> Modem not responding.

У кого какие есть предложения?


Вот мануаль по АТ командам гдето тут все и спрятано ВОТъ

http://narod.ru/disk/14677315000/PC%20Cards%20AT%20Commands_Rev%20B.pdf.html