Запустил wvdialconf
Создался файл /etc/wvdial.conf
Нагуглил и прописал строки инициализации из драйвера модема. т.к. без этого до проверок пароля даже и не доходило.
Идём дальше:
Если добавить опцию stupid mode = 1, то увидим:
--> local IP address 81.95.235.218
--> remote IP address 81.95.224.217
--> primary DNS address 81.95.224.146
--> secondary DNS address 81.95.224.65
Если убрать опцию Auto DNS = yes, то можно прописать
непосредственно в /etc/resolv.conf:
nameserver 81.95.224.146
nameserver 81.95.224.65
vi /etc/resolv.conf
nameserver 81.95.224.146
nameserver 81.95.224.65
----------------------------------------------------------------------------------
vi /etc/wvdial.conf
[Dialer Defaults]
Init1 = ATZ
Init2 = AT&F1E0V1S0=0&A0&C1&D2+MR=2;+DR=1;+ER=1
Init3 = AT+IBC=0,0,0,,,,,0;+PCW=2;+PMH=1
Modem Type = Analog Modem
Phone = 2449310
ISDN = 0
Username = sarkor
Password = sarkor
Modem = /dev/ttyS1
Baud = 115200
#Stupid Mode = 1
#Auto DNS = 1
New PPPD = yes
----------------------------------------------------------------------------------
[root@localhost ~]# wvdial
--> WvDial: Internet dialer version 1.60
--> Initializing modem.
--> Sending: ATZ
OK
--> Sending: AT&F1E0V1S0=0&A0&C1&D2+MR=2;+DR=1;+ER=1
AT&F1E0V1S0=0&A0&C1&D2+MR=2;+DR=1;+ER=1
OK
--> Sending: AT+IBC=0,0,0,,,,,0;+PCW=2;+PMH=1
OK
--> Modem initialized.
--> Sending: ATDT2449310
--> Waiting for carrier.
+MCR: V92
+MRR: 50666
+ER: LAPM
+DR: V44
CONNECT 50666
--> Carrier detected. Waiting for prompt.
User Access Verification
Username:
--> Looks like a login prompt.
--> Sending: sarkor
sarkor
Password:
--> Looks like a password prompt.
--> Sending: (password)
% Authentication failed.
Username:
--> Looks like a login prompt.
--> Sending: sarkor
sarkor
Password:
--> Looks like a password prompt.
--> Sending: (password)
% Authentication failed.
Username:
--> Looks like a login prompt.
--> Sending: sarkor
sarkor
Password:
--> Don't know what to do! Starting pppd and hoping for the best.
--> Starting pppd at Tue Dec 8 14:16:07 2009
--> Pid of pppd: 18619
--> Using interface ppp9
--> pppd: X
--> [08]�
--> [08]�
--> [08]
--> pppd: X
--> [08]�
--> [08]�
--> [08]
--> pppd: X
--> [08]�
--> [08]�
--> [08]
--> pppd: X
--> [08]�
--> [08]�
--> [08]
--> pppd: X
--> [08]�
--> [08]�
--> [08]
--> pppd: X
--> [08]�
--> [08]�
--> [08]
--> pppd: X
--> [08]�
--> [08]�
--> [08]
--> Disconnecting at Tue Dec 8 14:16:37 2009
--> The PPP daemon has died: A modem hung up the phone (exit code = 16)
--> man pppd explains pppd error codes in more detail.
--> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information.
--> Auto Reconnect will be attempted in 5 seconds
----------------------------------------------------------------------------------
less /var/log/messages
Dec 8 14:16:07 localhost pppd[18619]: pppd 2.4.4 started by root, uid 0
Dec 8 14:16:07 localhost pppd[18619]: Using interface ppp9
Dec 8 14:16:07 localhost pppd[18619]: Connect: ppp9 <--> /dev/ttyS1
Dec 8 14:16:37 localhost pppd[18619]: LCP: timeout sending Config-Requests
Dec 8 14:16:37 localhost pppd[18619]: Connection terminated.
Dec 8 14:16:37 localhost pppd[18619]: Receive serial link is not 8-bit clean:
Dec 8 14:16:37 localhost pppd[18619]: Problem: all had bit 7 set to 0
Dec 8 14:16:37 localhost pppd[18619]: Modem hangup
Dec 8 14:16:37 localhost pppd[18619]: Exit.
----------------------------------------------------------------------------------
Пользователь решил продолжить мысль 08 Декабря 2009, 12:42:09:
Очень, очень нужна Ваша помощь. Я не пойму что тут за проблема с паролями....
Тема: Помогите с dial-up модемом (Прочитано 1730 раз)
