ОС не видит флешку...

[ProDoter]

...Ни одна: ни Windows, ни Убунть
Произошло, видимо, после того, как я её выдернул из разъёма, не отмонтировав.
lsusb

Код: [Выделить]

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 093a:2510 Pixart Imaging, Inc.
Bus 003 Device 002: ID 062a:0107 Creative Labs
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 004: ID 0a5c:4503 Broadcom Corp.
Bus 006 Device 005: ID 0a5c:2146 Broadcom Corp.
Bus 006 Device 003: ID 0a5c:4502 Broadcom Corp.
Bus 006 Device 002: ID 0a5c:4500 Broadcom Corp.
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 058f:6362 Alcor Micro Corp. Hi-Speed 21-in-1 Flash Card Reader/Writer (Internal/External)
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubdmesg | tail

Код: [Выделить]

[   19.536088] CPU1 attaching sched-domain:
[   19.536090]  domain 0: span 0-1 level MC
[   19.536092]   groups: 1 0
[   21.946912] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   75.812390] sky2 eth0: enabling interface
[   75.812583] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   77.632447] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[   77.632981] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   80.161629] NET: Registered protocol family 24
[   88.284014] eth0: no IPv6 routers presentВроде ничего важного нету на флешке, но всё же жалко.

[Oni-chan]

думаю, стоит заглянуть на http://flashboot.ru/