Баг с отсутствием реакции на клавиатуру.

[qupl]

Ubuntu 10.04 32-бита c 35 ядром. Есть баг - чаще всего после хранителя экрана, отрубается реакция на клавиатуру и (реже) кнопку power на системнике. Лечится нажатием на кнопку "свернуть все окна" 2 раза, иногда помогает просто переключение на неактивное приложение. На запросы в поиске заваливает всякими xneur ит.д., которые к проблеме отношения не имеют.
Клавиатура PS/2, железо всё достаточно свежее.

[Mam(O)n]

Есть такое, но т.к. особо не напрягает решения не искал.

[Guranvir]

а что логи ядра говорят  (команда  dmesg)?

[qupl]

(Нажмите, чтобы показать/скрыть)

[    2.688630] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.688651] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.688656] sd 3:0:0:0: [sdb] Write Protect is off
[    2.688658] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.688678] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.688772]  sdb:
[    2.688877]  sda: sda1 sda2 sda3 < sdb1 sdb2 < sda5 > sda4
[    2.701837] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.711748]  sdb5 >
[    2.711994] sd 3:0:0:0: [sdb] Attached SCSI disk
[    2.713973] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.714021] r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.714081] r8169 0000:06:00.0: setting latency timer to 64
[    2.714086] r8169 0000:06:00.0: (unregistered net_device): unknown MAC, using family default
[    2.714150]   alloc irq_desc for 28 on node -1
[    2.714152]   alloc kstat_irqs on node -1
[    2.714164] r8169 0000:06:00.0: irq 28 for MSI/MSI-X
[    2.714957] r8169 0000:06:00.0: eth0: RTL8168b/8111b at 0xf8156000, 48:5b:39:c9:98:50, XID 0c100000 IRQ 28
[    2.716017] ohci1394 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.716054] ohci1394 0000:02:00.0: setting latency timer to 64
[    2.719561] usbcore: registered new interface driver hiddev
[    2.724425] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/input/input3
[    2.724529] generic-usb 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-5/input0
[    2.724587] usbcore: registered new interface driver usbhid
[    2.724617] usbhid: USB HID core driver
[    2.774091] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[fe8ff800-fe8fffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    2.990570] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    4.052858] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001e8c0000321fb9]
[    4.491188] udev: starting version 151
[    5.343944] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    5.343963] xhci_hcd 0000:03:00.0: setting latency timer to 64
[    5.343966] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    5.344056] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
[    5.344163] xhci_hcd 0000:03:00.0: irq 18, io mem 0xfe9fe000
[    5.344190] usb usb8: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
[    5.344252] xHCI xhci_add_endpoint called for root hub
[    5.344253] xHCI xhci_check_bandwidth called for root hub
[    5.344274] hub 8-0:1.0: USB hub found
[    5.344278] hub 8-0:1.0: 4 ports detected
[    5.388716] ACPI: resource piix4_smbus [io  0x0b00-0x0b07] conflicts with ACPI region SMRG [ 0x00000b00-0x00000b2f flags 0x47]
[    5.388719] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.461903] Linux video capture interface: v2.00
[    5.463764] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.549965] lp: driver loaded but no devices found
[    5.740424] saa7130/34: v4l2 driver version 0.2.15 loaded
[    5.740466]   alloc irq_desc for 22 on node -1
[    5.740468]   alloc kstat_irqs on node -1
[    5.740475] saa7134 0000:04:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    5.740481] saa7133[0]: found at 0000:04:07.0, rev: 240, irq: 22, latency: 64, mmio: 0xfeaff800
[    5.740487] saa7133[0]: subsystem: 0000:4091, board: Beholder BeholdTV 409 FM [card=67,autodetected]
[    5.740621] saa7133[0]: board init: gpio is c0c000
[    5.740702] input: saa7134 IR (Beholder BeholdTV 4 as /devices/pci0000:00/0000:00:14.4/0000:04:07.0/input/input4
[    5.740923] Creating IR device irrcv0
[    5.740931] IRQ 22/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[    5.774188] Linux agpgart interface v0.103
[    5.866394] [drm] Initialized drm 1.1.0 20060810
[    5.904703] saa7133[0]: i2c eeprom 00: 00 00 91 40 54 20 00 00 00 00 00 00 00 00 00 01
[    5.904711] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    5.904717] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    5.904723] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    5.904729] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    5.904734] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    5.904740] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    5.904746] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    5.904752] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    5.904757] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    5.904763] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    5.904769] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    5.904775] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    5.904780] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    5.904786] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    5.904792] saa7133[0]: i2c eeprom f0: 42 54 56 30 32 30 32 ff ff ff ff ff ff ff ff ff
[    5.954105] [drm] radeon defaulting to kernel modesetting.
[    5.954107] [drm] radeon kernel modesetting enabled.
[    5.954162] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    5.954165] radeon 0000:01:05.0: setting latency timer to 64
[    5.955188] [drm] initializing kernel modesetting (RS880 0x1002:0x9715).
[    5.955288] [drm] register mmio base: 0xFE7F0000
[    5.955289] [drm] register mmio size: 65536
[    5.956348] ATOM BIOS: 113
[    5.956359] [drm] Clocks initialized !
[    5.956361] [drm] 1 Power State(s)
[    5.956362] [drm] State 0 Default (default)
[    5.956364] [drm]    1 Clock Mode(s)
[    5.956365] [drm]       0 engine: 500000
[    5.956368] [drm] radeon: power management initialized
[    5.956374] radeon 0000:01:05.0: VRAM: 256M 0xC0000000 - 0xCFFFFFFF (256M used)
[    5.956377] radeon 0000:01:05.0: GTT: 512M 0xA0000000 - 0xBFFFFFFF
[    5.956536] [drm] Detected VRAM RAM=256M, BAR=256M
[    5.956539] [drm] RAM width 32bits DDR
[    5.956611] [TTM] Zone  kernel: Available graphics memory: 428388 kiB.
[    5.956612] [TTM] Zone highmem: Available graphics memory: 1677448 kiB.
[    5.956623] [drm] radeon: 256M of VRAM memory ready
[    5.956625] [drm] radeon: 512M of GTT memory ready.
[    5.956651] [drm] radeon: irq initialized.
[    5.956653] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    5.957114] [drm] Loading RS780 Microcode
[    5.957118] platform radeon_cp.0: firmware: requesting radeon/RS780_pfp.bin
[    5.979314] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.076789] hda_codec: ALC892: BIOS auto-probing.
[    6.078711] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5
[    6.080446] Too many connections
[    6.113434] platform radeon_cp.0: firmware: requesting radeon/RS780_me.bin
[    6.161094] platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin
[    6.192110] tuner 0-0043: chip found @ 0x86 (saa7133[0])
[    6.194295] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    6.195186] SGI XFS Quota Management subsystem
[    6.232594] [drm] ring test succeeded in 1 usecs
[    6.232701] [drm] radeon: ib pool ready.
[    6.232746] [drm] ib test succeeded in 0 usecs
[    6.232748] [drm] Enabling audio support
[    6.232766] [drm] Unknown TV standard; defaulting to NTSC
[    6.232853] [drm] Radeon Display Connectors
[    6.232855] [drm] Connector 0:
[    6.232856] [drm]   VGA
[    6.232858] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[    6.232859] [drm]   Encoders:
[    6.232860] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    6.232862] [drm] Connector 1:
[    6.232863] [drm]   HDMI-A
[    6.232863] [drm]   HPD3
[    6.232865] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[    6.232866] [drm]   Encoders:
[    6.232867] [drm]     DFP3: INTERNAL_KLDSCP_LVTMA
[    6.244301] tda9887 0-0043: creating new instance
[    6.244304] tda9887 0-0043: tda988[5/6/7] found
[    6.306290] XFS mounting filesystem sda5
[    6.332045] All bytes are equal. It is not a TEA5767
[    6.332113] tuner 0-0060: chip found @ 0xc0 (saa7133[0])
[    6.365027] tuner-simple 0-0060: creating new instance
[    6.365032] tuner-simple 0-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
[    6.428849] saa7133[0]: registered device video0 [v4l2]
[    6.428868] saa7133[0]: registered device vbi0
[    6.428887] saa7133[0]: registered device radio0
[    6.675965] [drm] fb mappable at 0xD0141000
[    6.675967] [drm] vram apper at 0xD0000000
[    6.675969] [drm] size 8294400
[    6.675970] [drm] fb depth is 24
[    6.675971] [drm]    pitch is 7680
[    6.676042] fb0: radeondrmfb frame buffer device
[    6.676043] registered panic notifier
[    6.676048] [drm] Initialized radeon 2.3.0 20080528 for 0000:01:05.0 on minor 0
[    6.676134] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    6.676164] HDA Intel 0000:01:05.1: setting latency timer to 64
[    6.682178] saa7134 ALSA driver for DMA sound loaded
[    6.682188] IRQ 22/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[    6.682205] saa7133[0]/alsa: saa7133[0] at 0xfeaff800 irq 22 registered as card 2
[    6.795604] Console: switching to colour frame buffer device 160x64
[    7.627966] Ending clean XFS mount for filesystem: sda5
[    8.361653] EXT4-fs (sda2): mounted filesystem with ordered data mode
[    9.906849] r8169 0000:06:00.0: eth0: link down
[    9.907012] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.578341] ppdev: user-space parallel port driver
[   18.689903] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[17952.977851] r8169 0000:06:00.0: eth0: link up
[17952.978419] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[20655.341438] PPP BSD Compression module registered
[20655.374964] PPP Deflate Compression module registered
[20659.691048] radeon 0000:01:05.0: f4e0b200 reserve failed for wait
[20660.270086] radeon 0000:01:05.0: f4e0b200 reserve failed for wait
[20663.538187] radeon 0000:01:05.0: f4e0b200 reserve failed for wait
[28275.808150] usb 1-2: new high speed USB device using ehci_hcd and address 3
[28276.001429] Initializing USB Mass Storage driver...
[28276.001685] scsi8 : usb-storage 1-2:1.0
[28276.001878] usbcore: registered new interface driver usb-storage
[28276.001883] USB Mass Storage support registered.
[28277.012611] scsi 8:0:0:0: Direct-Access     Samsung  YP-U3            1.00 PQ: 0 ANSI: 2
[28277.014470] sd 8:0:0:0: Attached scsi generic sg3 type 0
[28277.020632] sd 8:0:0:0: [sdc] 3881984 512-byte logical blocks: (1.98 GB/1.85 GiB)
[28277.021570] sd 8:0:0:0: [sdc] Write Protect is off
[28277.021581] sd 8:0:0:0: [sdc] Mode Sense: 00 26 00 00
[28277.021588] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[28277.024780] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[28277.024796]  sdc:
[28277.030152] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[28277.030163] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[31185.147900] radeon 0000:01:05.0: e14fad00 reserve failed for wait
[31226.517699] radeon 0000:01:05.0: e14fad00 reserve failed for wait
[31239.857053] radeon 0000:01:05.0: e14fad00 reserve failed for wait
много-много
[31279.604063] radeon 0000:01:05.0: e14fad00 reserve failed for wait
[31283.408740] radeon 0000:01:05.0: e14fad00 reserve failed for wait
[31284.443975] radeon 0000:01:05.0: e14fad00 reserve failed for wait

Кроме ругачки на открытые дрова от АТИ ничего подозрительного.

[Guranvir]

и еще возможно это новый баг так что сообщите на LP (Launchpad) и еще попробуйте апстримное ядро 2.6.36 автоматически собрать  можно используя программу KernelCheck

[qupl]

С Launchpad языковой барьер.    Собрать из исходников 36 ядро, как я понимаю? Потому что готового для lucid нет.

[Guranvir]

Вот Вам how-to по поводу launchpad . А собрать из исходников но эту процедуру до безобразия облегчает Kernelcheck

[qupl]

Ядро попробую собрать.
А с описанием бага: тут на русском неясно как сформулировать в чем вопрос. а английский "read only" и кроме "моя иметь проблема" ничего внятного от меня они не получат. Или я пропустил в хау-ту как на великом и могучем можно запостить баг?

[Guranvir]

Ну смотрите на английском его можно описать так:
I have Ubuntu 10.04 32-bit with kernel 26.35. After exit from screensaver keybord or button "Power" doesn't  work . I can solve this problem, when I switch to inactive application. My keybord is <модель клавы>
Можно приложить вывод команд sudo lspci и  dmesg. Первая перечисляет оборудование на PCI-карте     Так же добавьте вывод команды uname -a (полное имя ядра)

[Mam(O)n]

А если погуглить на буржуйском, то вот вырисовывается https://bugs.launchpad.net/ubuntu/+source/gnome-screensaver/+bug/586528

[qupl]

А если погуглить на буржуйском, то вот вырисовывается https://bugs.launchpad.net/ubuntu/+source/gnome-screensaver/+bug/586528

Очень похоже. Надо присоседиться.