Проверка дисков, после каждой перезагрузки

[pr0n1ra]

Итак, имеем недобук levono s10-3 c ssd диском crucial m4 64g (прошивка 000F) первая установка на него убунты прошла успешно, от включения экрана до появления раб.стола проходило секунд 17-19, но не работал wifi (советы и инструкции не помогали) пришлось ставить винду, включать в ней wifi, потом снова Ubuntu, все как и в прошлый раз делалось по этой https://help.ubuntu.ru/wiki/ssd инструкции + было сделано выравнивание. Но теперь система грузится раза в 2,5 дольше и появилась постоянна проверка дисков на ошибки
содержимое fstab

(Нажмите, чтобы показать/скрыть)

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
# / was on /dev/sda3 during installation
UUID=46d15186-06b8-4057-8f1e-c33d5957db8f /    ext4   noatime,nodiratime,discard,errors=remount-ro,commit=60 0 1
# /boot was on /dev/sda1 during installation
UUID=36f79219-ddc3-4546-8e2d-5e674e33b255 /boot  ext4 noatime,nodiratime,discard,errors=remount-ro,commit=60 0 1
# swap was on /dev/sda2 during installation
#UUID=54f17afa-aff3-4072-bb4c-150a5c6db949 none            swap    sw              0       0
/dev/sr0        /media/floppy0  auto    rw,user,noauto,exec,utf8 0       0
/dev/mapper/cryptswap1 none swap sw 0 0

tmpfs   /tmp      tmpfs   defaults   0   0
tmpfs   /var/tmp   tmpfs   defaults   0   0
tmpfs   /var/lock   tmpfs   defaults   0   0
tmpfs   /var/log   tmpfs   defaults   0   0
none   /dev      tmpfs   defaults   0   0

содержимое grub

(Нажмите, чтобы показать/скрыть)

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="elevator=noop"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"

содержимое sysctl.conf

(Нажмите, чтобы показать/скрыть)

#
# /etc/sysctl.conf - Configuration file for setting system variables
# See /etc/sysctl.d/ for additional system variables
# See sysctl.conf (5) for information.
#

#kernel.domainname = example.com

# Uncomment the following to stop low-level messages on console
#kernel.printk = 3 4 1 3

##############################################################3
# Functions previously found in netbase
#

# Uncomment the next two lines to enable Spoof protection (reverse-path filter)
# Turn on Source Address Verification in all interfaces to
# prevent some spoofing attacks
#net.ipv4.conf.default.rp_filter=1
#net.ipv4.conf.all.rp_filter=1

# Uncomment the next line to enable TCP/IP SYN cookies
# See http://lwn.net/Articles/277146/
# Note: This may impact IPv6 TCP sessions too
#net.ipv4.tcp_syncookies=1

# Uncomment the next line to enable packet forwarding for IPv4
#net.ipv4.ip_forward=1

# Uncomment the next line to enable packet forwarding for IPv6
#  Enabling this option disables Stateless Address Autoconfiguration
#  based on Router Advertisements for this host
#net.ipv6.conf.all.forwarding=1


###################################################################
# Additional settings - these settings can improve the network
# security of the host and prevent against some network attacks
# including spoofing attacks and man in the middle attacks through
# redirection. Some network environments, however, require that these
# settings are disabled so review and enable them as needed.
#
# Do not accept ICMP redirects (prevent MITM attacks)
#net.ipv4.conf.all.accept_redirects = 0
#net.ipv6.conf.all.accept_redirects = 0
# _or_
# Accept ICMP redirects only for gateways listed in our default
# gateway list (enabled by default)
# net.ipv4.conf.all.secure_redirects = 1
#
# Do not send ICMP redirects (we are not a router)
#net.ipv4.conf.all.send_redirects = 0
#
# Do not accept IP source route packets (we are not a router)
#net.ipv4.conf.all.accept_source_route = 0
#net.ipv6.conf.all.accept_source_route = 0
#
# Log Martian Packets
#net.ipv4.conf.all.log_martians = 1
#

vm.swappiness=10
vm.laptop_mode = 5
vm.dirty_writeback_centisecs = 6000

что делать и как лечить?

[victor00000]

Код: [Выделить]

mount
sudo blkid
lspci -knn | grep "Eth\|Net" -A2?

[pr0n1ra]

mount

(Нажмите, чтобы показать/скрыть)

/dev/sda3 on / type ext4 (rw,noatime,nodiratime,discard,errors=remount-ro,commit=60)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /tmp type tmpfs (rw)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /var/tmp type tmpfs (rw)
tmpfs on /var/log type tmpfs (rw)
/dev/sda1 on /boot type ext4 (rw,noatime,nodiratime,discard,errors=remount-ro,commit=60)
/home/pr0n1ra/.Private on /home/pr0n1ra type ecryptfs (ecryptfs_check_dev_ruid,ecryptfs_cipher=aes,ecryptfs_key_bytes=16,ecryptfs_unlink_sigs,ecryptfs_sig=2981ec9c5e4a2c05,ecryptfs_fnek_sig=a47df3865e4012c1)
gvfs-fuse-daemon on /home/pr0n1ra/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=pr0n1ra)
/dev/sdb on /media/DC21-D0D0 type vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks)

sudo blkid

(Нажмите, чтобы показать/скрыть)

/dev/sda1: UUID="36f79219-ddc3-4546-8e2d-5e674e33b255" TYPE="ext4"
/dev/sda3: UUID="46d15186-06b8-4057-8f1e-c33d5957db8f" TYPE="ext4"
/dev/mapper/cryptswap1: UUID="2eeede0b-110e-4ba2-9701-a55d3a8bea5b" TYPE="swap"
/dev/sdb: UUID="DC21-D0D0" TYPE="vfat"

lspci -knn | grep "Eth\|Net" -A2

(Нажмите, чтобы показать/скрыть)

05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
   Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:0123]
   Kernel driver in use: r8169
--
09:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
   Subsystem: Lenovo Device [17aa:30a1]
   Kernel driver in use: ath9k

[victor00000]

fstab
найти
=60 0 1
смотри два одинакого, надо 0 1 и 0 2

[pr0n1ra]

ну вроде пока норм грузится (сек 20) спасибо! думаю можно закрывать тему

[Сперанский]

Заблокируйте тему (кнопка внизу), пожалуйста.