Проблема с SMB в UBUNTU 7.10

[Joystick]

Доброго времени суток я конечно извеняюсь за такую тему но я искал и конкретно по саему вапросу не чиво не нашол я хочу зашарить каталог "public" с с правами только на чтение (Authentication=No) все делал как напасано в Wiki но ничего непол и з Windows XP невидно папки причен проверял на 7 компах нигде не видет папку эту может что то я делал неправильно вот мой конф фаил SMB

# # Sample configuration file for the Samba suite for Debian GNU/Linux. # # # This is the main Samba configuration file. You should read the # smb.conf(5) manual page in order to understand the options listed # here. Samba has a huge number of configurable options most of which # are not shown in this example # # Any line which starts with a ; (semi-colon) or a # (hash) # is a comment and is ignored. In this example we will use a # # for commentary and a ; for parts of the config file that you # may wish to enable # # NOTE: Whenever you modify this file you should run the command # "testparm" to check that you have not made any basic syntactic # errors. # #======================= Global Settings ======================= [global] ## Browsing/Identification ### # Change this to the workgroup/NT-domain name your Samba server will part of    workgroup = MSHOME # server string is the equivalent of the NT Description field    server string = %h server (Samba, Ubuntu) # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable its WINS Server ;   wins support = no # WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ;   wins server = w.x.y.z # This will prevent nmbd to search for NetBIOS names through DNS.    dns proxy = no # What naming service and in what order should we use to resolve host names # to IP addresses ;   name resolve order = lmhosts host wins bcast #### Networking #### # The specific set of interfaces / networks to bind to # This can be either the interface name or an IP address/netmask; # interface names are normally preferred ;   interfaces = 127.0.0.0/8 eth0 # Only bind to the named interfaces and/or networks; you must use the # 'interfaces' option above to use this. # It is recommended that you enable this feature if your Samba machine is # not protected by a firewall or is a firewall itself.  However, this # option cannot handle dynamic or non-broadcast interfaces correctly. ;   bind interfaces only = true #### Debugging/Accounting #### # This tells Samba to use a separate log file for each machine # that connects    log file = /var/log/samba/log.%m # Put a capping on the size of the log files (in Kb).    max log size = 1000 # If you want Samba to only log through syslog then set the following # parameter to 'yes'. ;   syslog only = no # We want Samba to log a minimum amount of information to syslog. Everything # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log # through syslog you should set the following parameter to something higher.    syslog = 0 # Do something sensible when Samba crashes: mail the admin a backtrace    panic action = /usr/share/samba/panic-action %d ####### Authentication ####### # "security = user" is always a good idea. This will require a Unix account # in this server for every user accessing the server. See # /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html # in the samba-doc package for details. ;   security = share # You may wish to use password encryption.  See the section on # 'encrypt passwords' in the smb.conf(5) manpage before enabling.    encrypt passwords = true # If you are using encrypted passwords, Samba will need to know what # password database type you are using.     passdb backend = tdbsam    obey pam restrictions = yes ;   guest account = nobody    invalid users = root # This boolean parameter controls whether Samba attempts to sync the Unix # password with the SMB password when the encrypted SMB password in the # passdb is changed. ;   unix password sync = no # For Unix password sync to work on a Debian GNU/Linux system, the following # parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for # sending the correct chat script for the passwd program in Debian Sarge).    passwd program = /usr/bin/passwd %u    passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n *passwd:*password\supdated\ssuccessfully* . # This boolean controls whether PAM will be used for password changes # when requested by an SMB client instead of the program listed in # 'passwd program'. The default is 'no'. ;   pam password change = no ########## Domains ########### # Is this machine able to authenticate users. Both PDC and BDC # must have this setting enabled. If you are the BDC you must # change the 'domain master' setting to no # ;   domain logons = yes # # The following setting only takes effect if 'domain logons' is set # It specifies the location of the user's profile directory # from the client point of view) # The following required a [profiles] share to be setup on the # samba server (see below) ;   logon path = \\%N\profiles\%U # Another common choice is storing the profile in the user's home directory ;   logon path = \\%N\%U\profile # The following setting only takes effect if 'domain logons' is set # It specifies the location of a user's home directory (from the client # point of view) ;   logon drive = H: ;   logon home = \\%N\%U # The following setting only takes effect if 'domain logons' is set # It specifies the script to run during logon. The script must be stored # in the [netlogon] share # NOTE: Must be store in 'DOS' file format convention ;   logon script = logon.cmd # This allows Unix users to be created on the domain controller via the SAMR # RPC pipe.  The example command creates a user account with a disabled Unix # password; please adapt to your needs ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u ########## Printing ########## # If you want to automatically load your printer list rather # than setting them up individually then you'll need this ;   load printers = yes # lpr(ng) printing. You may wish to override the location of the # printcap file ;   printing = bsd ;   printcap name = /etc/printcap # CUPS printing.  See also the cupsaddsmb( manpage in the # cupsys-client package. ;   printing = cups ;   printcap name = cups # When using [print$], root is implicitly a 'printer admin', but you can # also give this right to other users to add drivers and set printer # properties ;   printer admin = @lpadmin ############ Misc ############ # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting ;   include = /home/samba/etc/smb.conf.%m # Most people will find that this option gives better performance. # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html # for details # You may want to add the following on a Linux system: #         SO_RCVBUF=8192 SO_SNDBUF=8192    socket options = TCP_NODELAY # The following parameter is useful only if you have the linpopup package # installed. The samba maintainer and the linpopup maintainer are # working to ease installation and configuration of linpopup and samba. ;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' & # Domain Master specifies Samba to be the Domain Master Browser. If this # machine will be configured as a BDC (a secondary logon server), you # must set this to 'no'; otherwise, the default behavior is recommended. ;   domain master = auto # Some defaults for winbind (make sure you're not using the ranges # for something else.) ;   idmap uid = 10000-20000 ;   idmap gid = 10000-20000 ;   template shell = /bin/bash ; ; The following was the default behaviour in sarge ; but samba upstream reverted the default because it might induce ; performance issues in large organizations ; See #368251 for some of the consequences of *not* having ; this setting and smb.conf(5) for all details ; ;   winbind enum groups = yes ;   winbind enum users = yes #======================= Share Definitions ======================= # Un-comment the following (and tweak the other settings below to suit) # to enable the default home directory shares.  This will share each # user's home directory as \\server\username ;[homes] ;   comment = Home Directories ;   browseable = no # By default, \\server\username shares can be connected to by anyone # with access to the samba server.  Un-comment the following parameter # to make sure that only "username" can connect to \\server\username # This might need tweaking when using external authentication schemes ;   valid users = %S # By default, the home directories are exported read-only. Change next # parameter to 'yes' if you want to be able to write to them. ;   writable = no # File creation mask is set to 0700 for security reasons. If you want to # create files with group=rw permissions, set next parameter to 0775. ;   create mask = 0700 # Directory creation mask is set to 0700 for security reasons. If you want to # create dirs. with group=rw permissions, set next parameter to 0775. ;   directory mask = 0700 # Un-comment the following and create the netlogon directory for Domain Logons # (you need to configure Samba to act as a domain controller too.) ;[netlogon] ;   comment = Network Logon Service ;   path = /home/samba/netlogon ;   guest ok = yes ;   writable = no ;   share modes = no # Un-comment the following and create the profiles directory to store # users profiles (see the "logon path" option above) # (you need to configure Samba to act as a domain controller too.) # The path below should be writable by all users so that their # profile directory may be created the first time they log on ;[profiles] ;   comment = Users profiles ;   path = /home/samba/profiles ;   guest ok = no ;   browseable = no ;   create mask = 0600 ;   directory mask = 0700 wins support = no [printers]    comment = All Printers    browseable = no    path = /var/spool/samba    printable = yes    public = no    writable = no    create mode = 0700 # Windows clients look for this share name as a source of downloadable # printer drivers [print$]    comment = Printer Drivers    path = /var/lib/samba/printers    browseable = yes    read only = yes    guest ok = no # Uncomment to allow remote administration of Windows print drivers. # Replace 'ntadmin' with the name of the group your admin users are # members of. ;   write list = root, @ntadmin # A sample share for sharing your CD-ROM with others. ;[cdrom] ;   comment = Samba server's CD-ROM ;   writable = no ;   locking = no ;   path = /cdrom ;   public = yes # The next two parameters show how to auto-mount a CD-ROM when the #   cdrom share is accesed. For this to work /etc/fstab must contain #   an entry like this: # #       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0 # # The CD-ROM gets unmounted automatically after the connection to the # # If you don't want to use auto-mounting/unmounting make sure the CD #   is mounted on /cdrom # ;   preexec = /bin/mount /cdrom ;   postexec = /bin/umount /cdrom [public] comment = Public Folder   path = /home/public   public = yes   writable = no   create mask = 0777   directory mask = 0777   force user = nobody   force group = nogroup

[Joystick]

Ребята может кто то что то подскажет а то я уже искал решение проблемы но все без успешно

[6uest]

Раскомментируй строку
security = share
и проверь права на папку в Linux.

[fwhr]

http://ubuntuguide.org/wiki/Ubuntu:Gutsy_ru
пункт 1.5.1.х

[Joystick]

http://ubuntuguide.org/wiki/Ubuntu:Gutsy_ru
пункт 1.5.1.х

так я и песал же что я все делал как в Wiki написано но увы ничего непол тоесть на компах из под винды нивидно папки

[fwhr]

aptitude search samba
?