Гибернация ASUS k750j

[seph32]

Здравствуйте!
У меня ASUS k750j и xubuntu 15.04

(Нажмите, чтобы показать/скрыть)

lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d4)
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d4)
00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d4)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 04)
01:00.0 3D controller: NVIDIA Corporation GK208M [GeForce GT 740M] (rev a1)
03:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe
03:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)

Просто беда у него с гибернацией. Она как бы есть (pm-hibernate усыпляет ноут), но после включения просто черный экран. Причем нет возможности включить терминал (Ctrl+Alt+F*), даже на Sysrq+REISUB не реагирует, помогает только RESET. Уже пробовал и s2disk, и различные махинации с прописыванием resume=<uuid_диска_со_свопом> в /etc/default/grub (RAM 8Гб, swap сделал /dev/sda2 9000М), пробовал разные видео-драйвера (и nouveau и проприетарный от NVidia). Натыкался в нете на какие-то мутные записи, что может быть виноват второй hdd (вроде как  не может быть подключен) или wifi (собирал по инструкции для ralink-rt3290-wifi-driver с добавлением драйвера ядра в blacklist), но по-моему это бред.

Кто-нибудь сталкивался с проблемами с гибернацией конкретно с этим куском го*на? Как ее все-таки починить? Без гибернации жить вообще грустно

[ARTGALGANO]

https://forum.ubuntu.ru/index.php?topic=258732.msg2046092#msg2046092

[seph32]

(Нажмите, чтобы показать/скрыть)

cat /sys/power/disk
[platform] shutdown reboot suspend

ls /etc/pm/config.d/
00sleep_module

в нем 1 мною забитая строка:
SLEEP_MODULE="uswsusp"

cat /etc/default/acpi-support
#
# Configuration file for the acpi-support package
#
#
# The acpi-support package is intended as "glue" to make special functions of
# laptops work. Specifically, it translates special function keys for some
# laptop models into actions or generic function key presses.
#


#
# Suspend/hibernate method
# ------------------------
#
# When gnome-power-manager or klaptopdaemon are running, acpi-support will
# translate the suspend and hibernate keys of laptops into special "suspend"
# and "hibernate" keys that these daemons handle.
#
# Only in situations where there is no gnome-power-manager or klaptopdaemon
# running, acpi-support needs to perform suspend/hibernate in some other way.
# There are several options for this. The options are:
#
# dbus-pm:
#    Perform suspend and hibernate actions via a DBUS request to the power
#    management daemon. This works for power management daemons that we don't
#    know of. (For gnome-power-manager and klaptopdaemon this will do nothing,
#    since those will be detected when they are running, and triggered using
#    a virtual keypress.)
#
# dbus-hal:
#    Perform suspend and hibernate actions via a DBUS request directly to HAL,
#    bypassing any running power management daemons.
#
# pm-utils:
#    Use pm-suspend and pm-hibernate to suspend and hibernate. (The dbus method
#    normally results in this as well, but calls through dbus. Use this option
#    only if you don't have dbus installed.)
#
# hibernate:
#    Use the hibernate package to suspend and hibernate.
#
# acpi-support:
#    Use the legacy built-in suspend/hibernate support. (DEPRECATED)
#
# none:
#    Do not attempt to suspend/hibernate. Set SUSPEND_METHODS="none" to
#    disable suspend/hibernate handling in acpi-support.
#
# If you specify dbus or pm-utils, the result will normally be the same as when
# you suspend from your desktop environment. If you specify "hibernate" or
# "acpi-support", be aware that this probably does not match what your desktop
# environment would do (unless you have managed to configure something so that
# the DBUS power management interfaces call the hibernate package).
#
#
# Please specify a space separated list of options. The recommended value is
# "dbus pm-utils"
#
SUSPEND_METHODS="dbus-pm dbus-hal pm-utils"



#
# LEGACY BUILT IN SUSPEND SUPPORT (DEPRECATED)
# --------------------------------------------
#
# These options only work for the "acpi-support" suspend method. This is NOT
# recommended, but is retained for backward compatibility reasons.
#

# Comment the next line to disable ACPI suspend to RAM
ACPI_SLEEP=true

# Comment the next line to disable suspend to disk
ACPI_HIBERNATE=true

# Change the following to "standby" to use ACPI S1 sleep, rather than S3.
# This will save less power, but may work on more machines
ACPI_SLEEP_MODE=mem

# Add modules to this list to have them removed before suspend and reloaded
# on resume. An example would be MODULES="em8300 yenta_socket"
#
# Note that network cards and USB controllers will automatically be unloaded
# unless they're listed in MODULES_WHITELIST
MODULES=""

# Add modules to this list to leave them in the kernel over suspend/resume
MODULES_WHITELIST=""

# Should we save and restore state using the VESA BIOS Extensions?
SAVE_VBE_STATE=true

# The file that we use to save the vbestate
VBESTATE=/var/lib/acpi-support/vbestate

# Should we attempt to warm-boot the video hardware on resume?
POST_VIDEO=true

# Save and restore video state?
# SAVE_VIDEO_PCI_STATE=true

# Should we switch the screen off with DPMS on suspend?
USE_DPMS=true

# Use Radeontool to switch the screen off? Seems to be needed on some machines
# RADEON_LIGHT=true

# Uncomment the next line to switch away from X and back again after resume.
# This is needed for some hardware, but should be unnecessary on most.
# DOUBLE_CONSOLE_SWITCH=true

# Set the following to "platform" if you want to use ACPI to shut down
# your machine on hibernation
HIBERNATE_MODE=shutdown

# Comment this out to disable screen locking on resume
LOCK_SCREEN=true

# Uncomment this line to have DMA disabled before suspend and reenabled
# afterwards
# DISABLE_DMA=true

# Uncomment this line to attempt to reset the drive on resume. This seems
# to be needed for some Sonys
# RESET_DRIVE=true

# Add services to this list to stop them before suspend and restart them in
# the resume process.
STOP_SERVICES=""

# Restart Infra Red services on resume - off by default as it crashes some
# machines
RESTART_IRDA=false

# Add to this list network interfaces that you don't want to be stopped
# during suspend (in fact any network interface whose name starts with
# a prefix given in this list is skipped)
SKIP_INTERFACES="dummy qemu"

# Note: to enable "laptop mode" (to spin down your hard drive for longer
# periods of time), install the laptop-mode-tools package and configure
# it in /etc/laptop-mode/laptop-mode.conf.

Также посмотрел dmesg, строка "PM: Hibernation image not present or could not be loaded." присутствует. Что еще за hibernate.conf (для забивания строки "DisableWriteCacheOn /dev/sda")? У меня такого файла нет

[Pilot6]

seph32,
А с разделом точно ничего не напутали? Проверьте все внимательно еще раз.

В /etc/initramfs-tools/conf.d/resume все правильно прописано?

[seph32]

Pilot6, думаю все правильно:

blkid
...
/dev/sda2: UUID="77fb94dd-21a8-4a53-8c2f-82c22687391a" TYPE="swap"

соответственно в /etc/initramfs-tools/conf.d/resume
RESUME=/dev/disk/by-uuid/77fb94dd-21a8-4a53-8c2f-82c22687391a

раньше было RESUME=UUID=77fb94dd-21a8-4a53-8c2f-82c22687391a, изменил как раз из-за описанной проблемы.

[Pilot6]

seph32,
У меня такое тоже было. Я исправил так. Написал там просто

RESUME=/dev/sda2

Сразу заработало. Потом через много времени поменял опять на UUID, и тоже продолжило работать.