много сбойных блоков

[gerstal]

Доброго времени суток. Сейчас попробую описать свою проблему.Мне понадобилось восстановить удаленный файл.Я,конечно,полез в гугл.И нашел статью на хабре про утилиту scalpel.Установил её.Запустил.Но окончания работы утилиты не дождался,а завершил,закрыв консоль.Посерфил инет.И пошел спать.На следующий день при входе в систему Palimsest выдал,что "На диске много сбойных блоков".Подробности на скриншоте.Откуда вдруг взялось МНОГО битых блоков?Что делать?

[dsh]

В BIOS включен SMART?

[gerstal]

В BIOS включен SMART?

Было Auto,сейчас сделал Enabled. И?
Пользователь решил продолжить мысль 22 Января 2010, 08:26:28:сделал скан винта с помощью mdd
http://img683.ЗАПРЕЩЁННЫЙ РЕСУРС/img683/8237/005nz.jpg

(Нажмите, чтобы показать/скрыть)

Wed Jan 20 21:38:39 2010
Command line: TestDisk

TestDisk 6.11, Data Recovery Utility, April 2009
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
OS: Linux, kernel 2.6.31-14-generic (#48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009)
Compiler: GCC 4.4 - Jun 23 2009 17:11:34
ext2fs lib: 1.41.9, ntfs lib: 10:0:0, reiserfs lib: none, ewf lib: none
/dev/sda: LBA, HPA, LBA48, DCO support
/dev/sda: size       625142448 sectors
/dev/sda: user_max   625142448 sectors
/dev/sda: native_max 625142448 sectors
/dev/sda: dco        625142448 sectors
Warning: can't get size for Disk /dev/mapper/control - 0 B - CHS 1 1 1, sector size=512
Hard disk list
Disk /dev/sda - 320 GB / 298 GiB - CHS 38913 255 63, sector size=512 - ATA ST3320620A

Partition table type (auto): Intel
Disk /dev/sda - 320 GB / 298 GiB - ATA ST3320620A
Partition table type: Intel

Analyse Disk /dev/sda - 320 GB / 298 GiB - CHS 38913 255 63
Geometry from i386 MBR: head=255 sector=63
get_geometry_from_list_part_aux head=255 nbr=10
get_geometry_from_list_part_aux head=8 nbr=2
get_geometry_from_list_part_aux head=16 nbr=2
get_geometry_from_list_part_aux head=32 nbr=2
get_geometry_from_list_part_aux head=64 nbr=2
get_geometry_from_list_part_aux head=128 nbr=2
get_geometry_from_list_part_aux head=240 nbr=1
get_geometry_from_list_part_aux head=255 nbr=10
Current partition structure:
 1 * Linux                    0   1  1  4862 254 63   78124032
 2 E extended              4863   0  1 38912 254 63  547013250
 5 L Linux Swap            4863   1  1  5201 254 63    5445972
   X extended              5202   0  1 38912 254 63  541567215
 6 L Linux                 5202   1  1 38912 254 63  541567152
Ask the user for vista mode
Computes LBA from CHS for Disk /dev/sda - 320 GB / 298 GiB - CHS 38914 255 63
Allow partial last cylinder : Yes
search_vista_part: 1

search_part()
Disk /dev/sda - 320 GB / 298 GiB - CHS 38914 255 63

recover_EXT2: s_block_group_nr=0/298, s_mnt_count=3/25, s_blocks_per_group=32768, s_inodes_per_group=8176
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 9765504
recover_EXT2: part_size 78124032
     Linux                    0   1  1  4862 254 63   78124032
     EXT4 Large file Sparse superblock Recover, 39 GB / 37 GiB
     Linux Swap            4863   1  1  5201 254 43    5445952
     SWAP2 version 1, 2788 MB / 2659 MiB

recover_EXT2: s_block_group_nr=0/2065, s_mnt_count=3/29, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 67695894
recover_EXT2: part_size 541567152
     Linux                 5202   1  1 38912 254 63  541567152
     EXT4 Large file Sparse superblock Recover, 277 GB / 258 GiB
get_geometry_from_list_part_aux head=255 nbr=6
get_geometry_from_list_part_aux head=8 nbr=1
get_geometry_from_list_part_aux head=16 nbr=1
get_geometry_from_list_part_aux head=32 nbr=1
get_geometry_from_list_part_aux head=64 nbr=1
get_geometry_from_list_part_aux head=128 nbr=1
get_geometry_from_list_part_aux head=240 nbr=1
get_geometry_from_list_part_aux head=255 nbr=6

Results
   * Linux                    0   1  1  4862 254 63   78124032
     EXT4 Large file Sparse superblock Recover, 39 GB / 37 GiB
   L Linux Swap            4863   1  1  5201 254 63    5445972
     SWAP2 version 1, 2788 MB / 2659 MiB
   L Linux                 5202   1  1 38912 254 63  541567152
     EXT4 Large file Sparse superblock Recover, 277 GB / 258 GiB
32
 2 E extended LBA          4863   0  1 38912 254 63  547013250
 5 L Linux Swap            4863   1  1  5201 254 63    5445972
 6 L Linux                 5202   1  1 38912 254 63  541567152

search_part()
Disk /dev/sda - 320 GB / 298 GiB - CHS 38913 255 63

recover_EXT2: s_block_group_nr=0/298, s_mnt_count=3/25, s_blocks_per_group=32768, s_inodes_per_group=8176
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 9765504
recover_EXT2: part_size 78124032
     Linux                    0   1  1  4862 254 63   78124032
     EXT4 Large file Sparse superblock Recover, 39 GB / 37 GiB

block_group_nr 3

recover_EXT2: "e2fsck -b 98304 -B 4096 device" may be needed
recover_EXT2: s_block_group_nr=3/298, s_mnt_count=0/25, s_blocks_per_group=32768, s_inodes_per_group=8176
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 9765504
recover_EXT2: part_size 78124032
     Linux                    0   1  1  4862 254 63   78124032
     EXT4 Large file Sparse superblock Backup superblock, 39 GB / 37 GiB

recover_EXT2: s_block_group_nr=0/2289, s_mnt_count=19/24, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 75015509
recover_EXT2: part_size 600124072
     Linux                 1557   1  1 38912 254 58  600124072
     EXT3 Large file Sparse superblock, 307 GB / 286 GiB

block_group_nr 3

recover_EXT2: "e2fsck -b 98304 -B 4096 device" may be needed
recover_EXT2: s_block_group_nr=3/2289, s_mnt_count=0/24, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 75015509
recover_EXT2: part_size 600124072
     Linux                 1557   1  1 38912 254 58  600124072
     EXT3 Large file Sparse superblock Backup superblock, 307 GB / 286 GiB

recover_EXT2: s_block_group_nr=0/2257, s_mnt_count=2/38, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 73967276
recover_EXT2: part_size 591738208
     Linux                 2079   0  1 38912 254 61  591738208
     EXT4 Large file Sparse superblock, 302 GB / 282 GiB

recover_EXT2: s_block_group_nr=0/2220, s_mnt_count=4/28, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 72746336
recover_EXT2: part_size 581970688
     Linux                 2687   0  1 38912 254 61  581970688
     EXT4 Large file Sparse superblock, 297 GB / 277 GiB

block_group_nr 3

recover_EXT2: "e2fsck -b 98304 -B 4096 device" may be needed
recover_EXT2: s_block_group_nr=3/2220, s_mnt_count=0/28, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 72746336
recover_EXT2: part_size 581970688
     Linux                 2687   0  1 38912 254 61  581970688
     EXT4 Large file Sparse superblock Backup superblock, 297 GB / 277 GiB
     Linux Swap            3161   0  1  3415 254 40    4096552
     SWAP2 version 1, 2097 MB / 2000 MiB

recover_EXT2: s_block_group_nr=0/1309, s_mnt_count=9/24, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 42911623
recover_EXT2: part_size 343292984
     Linux                 3416   0  1 24784 254 62  343292984
     EXT3 Large file Sparse superblock, 175 GB / 163 GiB

block_group_nr 3

recover_EXT2: "e2fsck -b 98304 -B 4096 device" may be needed
recover_EXT2: s_block_group_nr=3/1309, s_mnt_count=0/24, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 42911623
recover_EXT2: part_size 343292984
     Linux                 3416   0  1 24784 254 62  343292984
     EXT3 Large file Sparse superblock Backup superblock, 175 GB / 163 GiB
     Linux Swap            4863   1  1  5201 254 43    5445952
     SWAP2 version 1, 2788 MB / 2659 MiB
     Linux Swap            5099   0  1  5492 254 45    6329592
     SWAP2 version 1, 3240 MB / 3090 MiB

recover_EXT2: s_block_group_nr=0/2065, s_mnt_count=3/29, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 67695894
recover_EXT2: part_size 541567152
     Linux                 5202   1  1 38912 254 63  541567152
     EXT4 Large file Sparse superblock Recover, 277 GB / 258 GiB

block_group_nr 3

recover_EXT2: "e2fsck -b 98304 -B 4096 device" may be needed
recover_EXT2: s_block_group_nr=3/2065, s_mnt_count=0/29, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 67695894
recover_EXT2: part_size 541567152
     Linux                 5202   1  1 38912 254 63  541567152
     EXT4 Large file Sparse superblock Backup superblock, 277 GB / 258 GiB
     Linux Swap            5349   0  1  5603 254 40    4096552
     SWAP2 version 1, 2097 MB / 2000 MiB
     Linux Swap            5471   0  1  5737 254 44    4289336
     SWAP2 version 1, 2196 MB / 2094 MiB

recover_EXT2: s_block_group_nr=0/2048, s_mnt_count=26/30, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 67111537
recover_EXT2: part_size 536892296
     Linux                 5493   0  1 38912 254 59  536892296
     EXT4 Large file Sparse superblock, 274 GB / 256 GiB

block_group_nr 3

recover_EXT2: "e2fsck -b 98304 -B 4096 device" may be needed
recover_EXT2: s_block_group_nr=3/2048, s_mnt_count=0/30, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 67111537
recover_EXT2: part_size 536892296
     Linux                 5493   0  1 38912 254 59  536892296
     EXT4 Large file Sparse superblock Backup superblock, 274 GB / 256 GiB

block_group_nr 3

recover_EXT2: "e2fsck -b 98304 -B 4096 device" may be needed
recover_EXT2: s_block_group_nr=3/1400, s_mnt_count=1/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 45903729
recover_EXT2: part_size 367229832
     Linux                15298   0  1 38156 254 60  367229832 [/]
     EXT3 Large file Sparse superblock Backup superblock, 188 GB / 175 GiB

recover_EXT2: s_block_group_nr=0/2065, s_mnt_count=3/29, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 67695894
recover_EXT2: part_size 541567152
     Linux                21930   1  1 55640 254 63  541567152
     EXT4 Large file Sparse superblock Recover, 277 GB / 258 GiB
This partition ends after the disk limits. (start=352305513, size=541567152, end=893872664, disk end=625142448)

recover_EXT2: s_block_group_nr=0/2033, s_mnt_count=4/27, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 66619546
recover_EXT2: part_size 532956368
     Linux                22211   1  1 55386   0 56  532956368
     EXT4 Large file Sparse superblock Recover, 272 GB / 254 GiB
This partition ends after the disk limits. (start=356819778, size=532956368, end=889776145, disk end=625142448)

recover_EXT2: s_block_group_nr=0/2033, s_mnt_count=4/27, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 66619546
recover_EXT2: part_size 532956368
     Linux                22212   2  1 55387   1 56  532956368
     EXT4 Large file Sparse superblock Recover, 272 GB / 254 GiB
This partition ends after the disk limits. (start=356835906, size=532956368, end=889792273, disk end=625142448)

recover_EXT2: s_block_group_nr=0/2048, s_mnt_count=19/30, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 67111537
recover_EXT2: part_size 536892296
     Linux                22231   2  1 55651   1 59  536892296
     EXT4 Large file Sparse superblock Recover, 274 GB / 256 GiB
This partition ends after the disk limits. (start=357141141, size=536892296, end=894033436, disk end=625142448)
SIGHUP detected! TestDisk has been killed.

Пользователь решил продолжить мысль 22 Января 2010, 10:59:33:Вот результат команды sudo smartctl --all /dev/sda

(Нажмите, чтобы показать/скрыть)

smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.10 family
Device Model:     ST3320620A
Serial Number:    9QF7B79H
Firmware Version: 3.AAF
User Capacity:    320 072 933 376 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Fri Jan 22 13:56:42 2010 SAMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)   Offline data collection activity
               was completed without error.
               Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:        ( 430) seconds.
Offline data collection
capabilities:           (0x5b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               No Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   1) minutes.
Extended self-test routine
recommended polling time:     ( 115) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME                       FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate                  0x000f   114   100   006    Pre-fail  Always       -       62869376
  3 Spin_Up_Time                                  0x0003   095   095   000    Pre-fail  Always       -       0
  4 Start_Stop_Count                             0x0032   099   099   020    Old_age   Always       -       1736
  5 Reallocated_Sector_Ct                   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate                             0x000f   082   060   030    Pre-fail  Always       -       167812019
  9 Power_On_Hours                            0x0032   096   096   000    Old_age   Always       -       4160
 10 Spin_Retry_Count                         0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count                     0x0032   099   099   020    Old_age   Always       -       1700
187 Reported_Uncorrect                    0x0032   001   001   000    Old_age   Always       -       450
189 High_Fly_Writes                           0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel          0x0022   060   055   045    Old_age   Always       -       40 (Lifetime Min/Max 26/42)
194 Temperature_Celsius                 0x0022   040   045   000    Old_age   Always       -       40 (0 21 0 0)
195 Hardware_ECC_Recovered     0x001a   068   060   000    Old_age   Always       -       116834578
197 Current_Pending_Sector           0x0012   001   001   000    Old_age   Always       -       4294967295
198 Offline_Uncorrectable                0x0010   001   001   000    Old_age   Offline      -       4294967295
199 UDMA_CRC_Error_Count        0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate             0x0000   100   253   000    Old_age   Offline      -       0
202 TA_Increase_Count                   0x0032   100   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 468 (device log contains only the most recent five errors)
   CR = Command Register [HEX]
   FR = Features Register [HEX]
   SC = Sector Count Register [HEX]
   SN = Sector Number Register [HEX]
   CL = Cylinder Low Register [HEX]
   CH = Cylinder High Register [HEX]
   DH = Device/Head Register [HEX]
   DC = Device Command Register [HEX]
   ER = Error register [HEX]
   ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 468 occurred at disk power-on lifetime: 2426 hours (101 days + 2 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 01 2d 09 29 e0  Error: UNC at LBA = 0x0029092d = 2689325

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  42 00 01 2d 09 29 e0 00      00:26:38.852  READ VERIFY SECTOR(S) EXT
  42 00 01 2c 09 29 e0 00      00:26:38.844  READ VERIFY SECTOR(S) EXT
  42 00 02 2e 09 29 e0 00      00:26:38.827  READ VERIFY SECTOR(S) EXT
  42 00 02 2c 09 29 e0 00      00:26:37.275  READ VERIFY SECTOR(S) EXT
  42 00 04 2c 09 29 e0 00      00:26:37.258  READ VERIFY SECTOR(S) EXT

Error 467 occurred at disk power-on lifetime: 2426 hours (101 days + 2 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 01 2d 09 29 e0  Error: UNC at LBA = 0x0029092d = 2689325

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  42 00 02 2c 09 29 e0 00      00:26:38.852  READ VERIFY SECTOR(S) EXT
  42 00 04 2c 09 29 e0 00      00:26:38.844  READ VERIFY SECTOR(S) EXT
  42 00 04 28 09 29 e0 00      00:26:38.827  READ VERIFY SECTOR(S) EXT
  42 00 08 30 09 29 e0 00      00:26:37.275  READ VERIFY SECTOR(S) EXT
  42 00 08 28 09 29 e0 00      00:26:37.258  READ VERIFY SECTOR(S) EXT

Error 466 occurred at disk power-on lifetime: 2426 hours (101 days + 2 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 03 2d 09 29 e0  Error: UNC at LBA = 0x0029092d = 2689325

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  42 00 04 2c 09 29 e0 00      00:26:38.852  READ VERIFY SECTOR(S) EXT
  42 00 04 28 09 29 e0 00      00:26:38.844  READ VERIFY SECTOR(S) EXT
  42 00 08 30 09 29 e0 00      00:26:38.827  READ VERIFY SECTOR(S) EXT
  42 00 08 28 09 29 e0 00      00:26:37.275  READ VERIFY SECTOR(S) EXT
  42 00 10 38 09 29 e0 00      00:26:37.258  READ VERIFY SECTOR(S) EXT

Error 465 occurred at disk power-on lifetime: 2426 hours (101 days + 2 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 03 2d 09 29 e0  Error: UNC at LBA = 0x0029092d = 2689325

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  42 00 08 28 09 29 e0 00      00:26:31.005  READ VERIFY SECTOR(S) EXT
  42 00 10 38 09 29 e0 00      00:26:31.004  READ VERIFY SECTOR(S) EXT
  42 00 10 28 09 29 e0 00      00:26:30.984  READ VERIFY SECTOR(S) EXT
  42 00 20 48 09 29 e0 00      00:26:37.275  READ VERIFY SECTOR(S) EXT
  42 00 20 28 09 29 e0 00      00:26:37.258  READ VERIFY SECTOR(S) EXT

Error 464 occurred at disk power-on lifetime: 2426 hours (101 days + 2 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 0b 2d 09 29 e0  Error: UNC at LBA = 0x0029092d = 2689325

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  42 00 10 28 09 29 e0 00      00:26:31.005  READ VERIFY SECTOR(S) EXT
  42 00 20 48 09 29 e0 00      00:26:31.004  READ VERIFY SECTOR(S) EXT
  42 00 20 28 09 29 e0 00      00:26:30.984  READ VERIFY SECTOR(S) EXT
  42 00 40 28 09 29 e0 00      00:26:29.441  READ VERIFY SECTOR(S) EXT
  42 00 40 e8 08 29 e0 00      00:26:29.438  READ VERIFY SECTOR(S) EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      4160         -
# 2  Short offline       Completed without error       00%      4151         -
# 3  Short offline       Completed without error       00%      4151         -
# 4  Short offline       Aborted by host               80%      4150         -
# 5  Short offline       Completed without error       00%      3684         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.