Установка Creative X FI [Обновлено 25.10.09] в Karmic поддержка из коробки

[ressac]

у меня старая система 4.1 , тойсть front y rear звук только на front , как сделать на боковые?

[ressac]

потратил весь день! переставил саму ОС! обновления качнул! поставил дровишки! всё красиво! всё стало!


а вот звука нет! вот что пишет

а как-это у тебя там появилось Front и Rear? у меня такого нет

[Siegi]

короче, иксфи титаниум профешнл, 8.10. Звука нет. Следовал инструкциям на стр.1.
Драйвер вроде установился, в меню драйверов он есть и задействован. При установке ругани не было. Но звука НЕТ. В правом верхнем углу динамик с красным крестиком. А вот вывод команды dmsg:

Код: [Выделить]

[    0.402288] ACPI: RTC can wake from S4
[    0.416033] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[    0.416038] system 00:08: ioport range 0x290-0x297 has been reserved
[    0.416040] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[    0.416041] system 00:09: ioport range 0x800-0x87f has been reserved
[    0.416043] system 00:09: ioport range 0x480-0x4bf has been reserved
[    0.416044] system 00:09: iomem range 0xffafe000-0xffb0cbff could not be reserved
[    0.416045] system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
[    0.416047] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.416048] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.416049] system 00:09: iomem range 0xfff00000-0xfffffffe could not be reserved
[    0.416050] system 00:09: iomem range 0xfebfe000-0xfebfec00 has been reserved
[    0.416053] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[    0.416054] system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
[    0.416057] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[    0.416059] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[    0.416060] system 00:0d: iomem range 0xc0000-0xcffff has been reserved
[    0.416061] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[    0.416063] system 00:0d: iomem range 0x100000-0xbfffffff could not be reserved
[    0.420818] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.420820] pci 0000:00:01.0:   IO window: 0xc000-0xcfff
[    0.420821] pci 0000:00:01.0:   MEM window: 0xdc000000-0xdfdfffff
[    0.420823] pci 0000:00:01.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
[    0.420825] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
[    0.420826] pci 0000:00:1c.0:   IO window: disabled
[    0.420828] pci 0000:00:1c.0:   MEM window: disabled
[    0.420831] pci 0000:00:1c.0:   PREFETCH window: 0x000000daf00000-0x000000daffffff
[    0.420834] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[    0.420835] pci 0000:00:1c.2:   IO window: disabled
[    0.420837] pci 0000:00:1c.2:   MEM window: 0xf0000000-0xf7efffff
[    0.420839] pci 0000:00:1c.2:   PREFETCH window: disabled
[    0.420843] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[    0.420844] pci 0000:00:1c.4:   IO window: 0xe000-0xefff
[    0.420847] pci 0000:00:1c.4:   MEM window: 0xdff00000-0xdfffffff
[    0.420849] pci 0000:00:1c.4:   PREFETCH window: disabled
[    0.420852] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
[    0.420854] pci 0000:00:1c.5:   IO window: 0xd000-0xdfff
[    0.420856] pci 0000:00:1c.5:   MEM window: 0xdfe00000-0xdfefffff
[    0.420858] pci 0000:00:1c.5:   PREFETCH window: disabled
[    0.420862] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[    0.420863] pci 0000:00:1e.0:   IO window: disabled
[    0.420865] pci 0000:00:1e.0:   MEM window: 0xf7f00000-0xfbffffff
[    0.420867] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.420874] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.420876] pci 0000:00:01.0: setting latency timer to 64
[    0.420880] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.420882] pci 0000:00:1c.0: setting latency timer to 64
[    0.420886] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.420888] pci 0000:00:1c.2: setting latency timer to 64
[    0.420892] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.420894] pci 0000:00:1c.4: setting latency timer to 64
[    0.420898] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.420900] pci 0000:00:1c.5: setting latency timer to 64
[    0.420903] pci 0000:00:1e.0: setting latency timer to 64
[    0.420905] bus: 00 index 0 io port: [0, ffff]
[    0.420906] bus: 00 index 1 mmio: [0, ffffffffffffffff]
[    0.420907] bus: 01 index 0 io port: [c000, cfff]
[    0.420908] bus: 01 index 1 mmio: [dc000000, dfdfffff]
[    0.420909] bus: 01 index 2 mmio: [c0000000, cfffffff]
[    0.420909] bus: 01 index 3 mmio: [0, 0]
[    0.420910] bus: 05 index 0 mmio: [0, 0]
[    0.420911] bus: 05 index 1 mmio: [0, 0]
[    0.420911] bus: 05 index 2 mmio: [daf00000, daffffff]
[    0.420912] bus: 05 index 3 mmio: [0, 0]
[    0.420913] bus: 04 index 0 mmio: [0, 0]
[    0.420914] bus: 04 index 1 mmio: [f0000000, f7efffff]
[    0.420914] bus: 04 index 2 mmio: [0, 0]
[    0.420915] bus: 04 index 3 mmio: [0, 0]
[    0.420916] bus: 03 index 0 io port: [e000, efff]
[    0.420917] bus: 03 index 1 mmio: [dff00000, dfffffff]
[    0.420917] bus: 03 index 2 mmio: [0, 0]
[    0.420918] bus: 03 index 3 mmio: [0, 0]
[    0.420919] bus: 02 index 0 io port: [d000, dfff]
[    0.420920] bus: 02 index 1 mmio: [dfe00000, dfefffff]
[    0.420920] bus: 02 index 2 mmio: [0, 0]
[    0.420921] bus: 02 index 3 mmio: [0, 0]
[    0.420922] bus: 06 index 0 mmio: [0, 0]
[    0.420923] bus: 06 index 1 mmio: [f7f00000, fbffffff]
[    0.420923] bus: 06 index 2 mmio: [0, 0]
[    0.420924] bus: 06 index 3 io port: [0, ffff]
[    0.420925] bus: 06 index 4 mmio: [0, ffffffffffffffff]
[    0.420929] NET: Registered protocol family 2
[    0.460101] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.460703] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.463478] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.463928] TCP: Hash tables configured (established 524288 bind 65536)
[    0.463929] TCP reno registered
[    0.472115] NET: Registered protocol family 1
[    0.472184] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[    0.504025] Switched to high resolution mode on CPU 0
[    0.673272]  it is
[    0.885883] Freeing initrd memory: 9794k freed
[    0.888412] audit: initializing netlink socket (disabled)
[    0.888432] type=2000 audit(1236803452.884:1): initialized
[    0.891483] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.892693] VFS: Disk quotas dquot_6.5.1
[    0.892733] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.892792] msgmni has been set to 7918
[    0.892853] io scheduler noop registered
[    0.892854] io scheduler anticipatory registered
[    0.892855] io scheduler deadline registered
[    0.892915] io scheduler cfq registered (default)
[    1.965610] pci 0000:01:00.0: Boot video device
[    1.965669] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    1.965684] pcieport-driver 0000:00:01.0: found MSI capability
[    1.965700] pci_express 0000:00:01.0:pcie00: allocate port service
[    1.965719] pci_express 0000:00:01.0:pcie03: allocate port service
[    1.965758] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    1.965777] pcieport-driver 0000:00:1c.0: found MSI capability
[    1.965797] pci_express 0000:00:1c.0:pcie00: allocate port service
[    1.965816] pci_express 0000:00:1c.0:pcie02: allocate port service
[    1.965833] pci_express 0000:00:1c.0:pcie03: allocate port service
[    1.965880] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    1.965899] pcieport-driver 0000:00:1c.2: found MSI capability
[    1.965919] pci_express 0000:00:1c.2:pcie00: allocate port service
[    1.965936] pci_express 0000:00:1c.2:pcie02: allocate port service
[    1.965955] pci_express 0000:00:1c.2:pcie03: allocate port service
[    1.966002] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[    1.966021] pcieport-driver 0000:00:1c.4: found MSI capability
[    1.966041] pci_express 0000:00:1c.4:pcie00: allocate port service
[    1.966059] pci_express 0000:00:1c.4:pcie02: allocate port service
[    1.966076] pci_express 0000:00:1c.4:pcie03: allocate port service
[    1.966122] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[    1.966141] pcieport-driver 0000:00:1c.5: found MSI capability
[    1.966161] pci_express 0000:00:1c.5:pcie00: allocate port service
[    1.966178] pci_express 0000:00:1c.5:pcie02: allocate port service
[    1.966195] pci_express 0000:00:1c.5:pcie03: allocate port service
[    1.980903] hpet_resources: 0xfed00000 is busy
[    1.980948] Linux agpgart interface v0.103
[    1.980951] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.981052] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.981387] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.982232] brd: module loaded
[    1.982267] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    1.982345] PNP: No PS/2 controller found. Probing ports directly.
[    1.985340] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.985343] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.996049] mice: PS/2 mouse device common for all mice
[    1.996109] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.996128] rtc0: alarms up to one month, y3k, hpet irqs
[    1.996146] cpuidle: using governor ladder
[    1.996147] cpuidle: using governor menu
[    1.996330] TCP cubic registered
[    1.996425] registered taskstats version 1
[    1.996500]   Magic number: 1:407:548
[    1.996562] rtc_cmos 00:03: setting system clock to 2009-03-11 20:30:54 UTC (1236803454)
[    1.996564] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.996565] EDD information not available.
[    1.996582] Freeing unused kernel memory: 540k freed
[    1.996703] Write protecting the kernel read-only data: 4356k
[    2.078490] fuse init (API version 7.9)
[    2.116769] ACPI: SSDT BFF9E0C0, 0184 (r1    AMI   CPU1PM        1 INTL 20060113)
[    2.117097] processor ACPI0007:00: registered as cooling_device0
[    2.117281] ACPI: SSDT BFF9E250, 013A (r1    AMI   CPU2PM        1 INTL 20060113)
[    2.117588] processor ACPI0007:01: registered as cooling_device1
[    2.245033] usbcore: registered new interface driver usbfs
[    2.245045] usbcore: registered new interface driver hub
[    2.245340] usbcore: registered new device driver usb
[    2.250110] USB Universal Host Controller Interface driver v3.0
[    2.250141] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.250147] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    2.250149] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    2.250171] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.250196] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b880
[    2.250281] usb usb1: configuration #1 chosen from 1 choice
[    2.250292] hub 1-0:1.0: USB hub found
[    2.250295] hub 1-0:1.0: 2 ports detected
[    2.260033] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    2.264472] No dock devices found.
[    2.269781] SCSI subsystem initialized
[    2.275909] libata version 3.00 loaded.
[    2.352664] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.352670] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    2.352672] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    2.352685] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    2.352713] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000bc00
[    2.352759] usb usb2: configuration #1 chosen from 1 choice
[    2.352771] hub 2-0:1.0: USB hub found
[    2.352775] hub 2-0:1.0: 2 ports detected
[    2.560715] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.560725] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    2.560726] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    2.560741] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
[    2.564651] ehci_hcd 0000:00:1a.7: debug port 1
[    2.564654] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    2.564666] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xdbfffc00
[    2.676006] usb 2-1: new full speed USB device using uhci_hcd and address 2
[    2.688004] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    2.688082] usb usb3: configuration #1 chosen from 1 choice
[    2.688095] hub 3-0:1.0: USB hub found
[    2.688100] hub 3-0:1.0: 4 ports detected
[    2.744024] hub 2-0:1.0: unable to enumerate USB device on port 1
[    2.896250] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.896256] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.896258] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.896271] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    2.896296] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b400
[    2.896337] usb usb4: configuration #1 chosen from 1 choice
[    2.896349] hub 4-0:1.0: USB hub found
[    2.896352] hub 4-0:1.0: 2 ports detected
[    3.000981] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    3.000984] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    3.000986] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.000997] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[    3.001018] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b480
[    3.001058] usb usb5: configuration #1 chosen from 1 choice
[    3.001069] hub 5-0:1.0: USB hub found
[    3.001072] hub 5-0:1.0: 2 ports detected
[    3.012005] usb 3-3: new high speed USB device using ehci_hcd and address 2
[    3.150708] usb 3-3: configuration #1 chosen from 1 choice
[    3.209001] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    3.209005] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    3.209007] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.209019] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[    3.209035] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800
[    3.209076] usb usb6: configuration #1 chosen from 1 choice
[    3.209088] hub 6-0:1.0: USB hub found
[    3.209091] hub 6-0:1.0: 2 ports detected
[    3.313147] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.313156] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    3.313158] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.313173] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[    3.317083] ehci_hcd 0000:00:1d.7: debug port 1
[    3.317087] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    3.317091] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdbfff800
[    3.320988] usb 5-1: new full speed USB device using uhci_hcd and address 2
[    3.332004] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.332052] usb usb7: configuration #1 chosen from 1 choice
[    3.332067] hub 7-0:1.0: USB hub found
[    3.332071] hub 7-0:1.0: 6 ports detected
[    3.388025] hub 5-0:1.0: unable to enumerate USB device on port 1
[    3.540438] ahci 0000:00:1f.2: version 3.0
[    3.540444] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    3.540893] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    3.540895] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems
[    3.540897] ahci 0000:00:1f.2: setting latency timer to 64
[    3.541050] scsi0 : ahci
[    3.541103] scsi1 : ahci
[    3.541130] scsi2 : ahci
[    3.541158] scsi3 : ahci
[    3.541187] scsi4 : ahci
[    3.541213] scsi5 : ahci
[    3.541277] ata1: SATA max UDMA/133 abar m2048@0xdbfff000 port 0xdbfff100 irq 2298
[    3.541279] ata2: SATA max UDMA/133 abar m2048@0xdbfff000 port 0xdbfff180 irq 2298
[    3.541280] ata3: SATA max UDMA/133 abar m2048@0xdbfff000 port 0xdbfff200 irq 2298
[    3.541282] ata4: SATA max UDMA/133 abar m2048@0xdbfff000 port 0xdbfff280 irq 2298
[    3.541283] ata5: SATA max UDMA/133 abar m2048@0xdbfff000 port 0xdbfff300 irq 2298
[    3.541284] ata6: SATA max UDMA/133 abar m2048@0xdbfff000 port 0xdbfff380 irq 2298
[    3.652007] usb 7-3: new high speed USB device using ehci_hcd and address 2
[    3.784461] usb 7-3: configuration #1 chosen from 1 choice
[    3.784710] hub 7-3:1.0: USB hub found
[    3.784943] hub 7-3:1.0: 4 ports detected
[    3.860010] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.871982] ata1.00: ATA-7: WDC WD7500AAKS-00RBA0, 30.04G30, max UDMA/133
[    3.871984] ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    3.872781] ata1.00: configured for UDMA/133
[    4.064150] usb 7-3.2: new low speed USB device using ehci_hcd and address 3
[    4.163529] usb 7-3.2: configuration #1 chosen from 1 choice
[    4.208009] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.220439] ata2.00: ATA-7: WDC WD3200AAJS-00RYA0, 12.01B01, max UDMA/133
[    4.220441] ata2.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    4.221167] ata2.00: configured for UDMA/133
[    4.556113] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.556377] ata3.00: ATAPI: ASUS    DRW-2014L1T, 1.02, max UDMA/66, ATAPI AN
[    4.556775] ata3.00: configured for UDMA/66
[    4.892008] ata4: SATA link down (SStatus 0 SControl 300)
[    5.228008] ata5: SATA link down (SStatus 0 SControl 300)
[    5.564008] ata6: SATA link down (SStatus 0 SControl 300)
[    5.580060] scsi 0:0:0:0: Direct-Access     ATA      WDC WD7500AAKS-0 30.0 PQ: 0 ANSI: 5
[    5.580118] scsi 1:0:0:0: Direct-Access     ATA      WDC WD3200AAJS-0 12.0 PQ: 0 ANSI: 5
[    5.580488] scsi 2:0:0:0: CD-ROM            ASUS     DRW-2014L1T      1.02 PQ: 0 ANSI: 5
[    5.580670] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.595496] usbcore: registered new interface driver hiddev
[    5.596028] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    5.596030] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[    5.596034] ahci 0000:03:00.0: setting latency timer to 64
[    5.596216] scsi6 : ahci
[    5.596252] scsi7 : ahci
[    5.596290] ata7: SATA max UDMA/133 abar m8192@0xdfffe000 port 0xdfffe100 irq 16
[    5.596292] ata8: SATA max UDMA/133 abar m8192@0xdfffe000 port 0xdfffe180 irq 16
[    5.597545] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.7/usb7/7-3/7-3.2/7-3.2:1.0/input/input1
[    5.616080] input,hidraw0: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.7-3.2
[    5.629905] Fixing up Microsoft Wireless Receiver Model 1028 report descriptor
[    5.636365] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.7/usb7/7-3/7-3.2/7-3.2:1.1/input/input2
[    5.660028] input,hidraw1: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.7-3.2
[    5.660035] usbcore: registered new interface driver usbhid
[    5.660036] usbhid: v2.6:USB HID core driver
[    5.916125] ata7: SATA link down (SStatus 0 SControl 300)
[    6.252018] ata8: SATA link down (SStatus 0 SControl 300)
[    6.268032] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
[    6.268038] pata_acpi 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    6.268060] pata_acpi 0000:03:00.1: setting latency timer to 64
[    6.268069] pata_acpi 0000:03:00.1: PCI INT B disabled
[    6.268240] sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    6.268245] sky2 0000:02:00.0: setting latency timer to 64
[    6.268255] sky2 0000:02:00.0: v1.22 addr 0xdfefc000 irq 17 Yukon-2 EC Ultra rev 2
[    6.268569] sky2 eth0: addr 00:0e:a6:f9:1d:5a
[    6.268597] ohci1394 0000:06:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    6.317511] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[f7fff800-f7ffffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    6.320138] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[    6.320156] scsi 1:0:0:0: Attached scsi generic sg1 type 0
[    6.320172] scsi 2:0:0:0: Attached scsi generic sg2 type 5
[    6.325647] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    6.325669] pata_jmicron 0000:03:00.1: setting latency timer to 64
[    6.325715] scsi8 : pata_jmicron
[    6.325832] scsi9 : pata_jmicron
[    6.326317] ata9: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 17
[    6.326318] ata10: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 17
[    6.331953] Driver 'sd' needs updating - please use bus_type methods
[    6.332010] sd 0:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB)
[    6.332018] sd 0:0:0:0: [sda] Write Protect is off
[    6.332019] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.332031] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.332086] sd 0:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB)
[    6.332093] sd 0:0:0:0: [sda] Write Protect is off
[    6.332094] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.332106] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.332108]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[    6.335985]  sda1 sda2 < sda5 sda6 sda7 >
[    6.370615] sd 0:0:0:0: [sda] Attached SCSI disk
[    6.370648] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[    6.370655] sd 1:0:0:0: [sdb] Write Protect is off
[    6.370657] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    6.370669] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.370695] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[    6.370702] sd 1:0:0:0: [sdb] Write Protect is off
[    6.370703] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    6.370715] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.370716]  sdb: sdb1 sdb2 sdb3 sdb4
[    6.382414] sd 1:0:0:0: [sdb] Attached SCSI disk
[    6.384994] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[    6.384995] Uniform CD-ROM driver Revision: 3.20
[    6.385026] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    6.937883] PM: Starting manual resume from disk
[    6.937885] PM: Resume from partition 8:17
[    6.937886] PM: Checking hibernation image.
[    6.937995] PM: Resume from disk failed.
[    6.941601] ReiserFS: sdb2: found reiserfs format "3.6" with standard journal
[    6.941603] ReiserFS: sdb2: using ordered data mode
[    6.966777] ReiserFS: sdb2: journal params: device sdb2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[    6.966970] ReiserFS: sdb2: checking transaction log (sdb2)
[    7.592938] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d800010d4359]
[   18.610638] ReiserFS: sdb2: replayed 436 transactions in 12 seconds
[   18.613052] ReiserFS: sdb2: Using r5 hash to sort names
[   22.465657] udevd version 124 started
[   22.676113] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   22.696741] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   22.755433] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   22.776518] ACPI: Power Button (FF) [PWRF]
[   22.776588] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[   22.804511] ACPI: Power Button (CM) [PWRB]
[   23.183608] nvidia: module license 'NVIDIA' taints kernel.
[   23.438419] udev: renamed network interface eth0 to eth1
[   23.439118] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   23.439123] nvidia 0000:01:00.0: setting latency timer to 64
[   23.439195] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  177.82  Tue Nov  4 16:50:05 PST 2008
[   23.461382] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   23.522690] iTCO_vendor_support: vendor-support=0
[   23.524214] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[   23.603777] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860)
[   23.603808] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   23.636553] Linux video capture interface: v2.00
[   23.747063] cx18:  Start initialization, version 1.0.0
[   23.747200] cx18-0: Initializing card #0
[   23.747202] cx18-0: Unknown card: vendor/device: 14f1/5b7a
[   23.747203] cx18-0:               subsystem vendor/device: 5854/3343
[   23.747205] cx18-0: Defaulting to Hauppauge HVR-1600 card
[   23.747205] cx18-0: Please mail the vendor/device and subsystem vendor/device IDs and what kind of
[   23.747206] cx18-0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)
[   23.747207] cx18-0: Prefix your subject line with [UNKNOWN CX18 CARD].
[   23.747221] cx18 0000:06:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   23.748285] cx18-0: cx23418 revision 01010000 (B)
[   23.904231] phy0: Selected rate control algorithm 'pid'
[   23.943855] tveeprom 0-0050: Encountered bad packet header [56]. Corrupt or not a Hauppauge eeprom.
[   23.943857] cx18-0: Invalid EEPROM
[   23.943859] cx18-0: VBI is not yet supported
[   23.957001] phy0: hwaddr 00:15:af:0a:c7:e9, RTL8187vB (default) V1 + rtl8225z2
[   23.957017] usbcore: registered new interface driver rtl8187
[   24.093868] tuner 1-0061: chip found @ 0xc2 (cx18 i2c driver #0-1)
[   24.094082] cs5345 0-004c: chip found @ 0x98 (cx18 i2c driver #0-0)
[   24.099069] cx18-0: Disabled encoder IDX device
[   24.099484] cx18-0: Registered device video0 for encoder MPEG (2 MB)
[   24.099486] DVB: registering new adapter (cx18)
[   24.126186] s5h1409_readreg: readreg error (ret == -6)
[   24.126214] cx18-0: frontend initialization failed
[   24.126709] cx18-0: DVB failed to register
[   24.126938] cx18-0: Registered device video32 for encoder YUV (2 MB)
[   24.127162] cx18-0: Registered device video24 for encoder PCM audio (1 MB)
[   24.127386] cx18-0: Registered device radio0 for encoder radio
[   24.130600] cx18-0: Error -12 registering devices
[   24.131805] cx18-0: Error -12 on initialization
[   24.131810] cx18: probe of 0000:06:01.0 failed with error -12
[   24.131834] ctatc: Card not recognised
[   24.131839] CTALSA: probe of 0000:04:00.0 failed with error -2
[   24.132497] cx18:  End initialization
[   28.430040] lp: driver loaded but no devices found
[   28.505359] Adding 2000052k swap on /dev/sdb1.  Priority:-1 extents:1 across:2000052k
[   36.263841] ReiserFS: sdb2: Removing [128247 139839 0x0 SD]..done
[   36.263884] ReiserFS: sdb2: Removing [22 99699 0x0 SD]..done
[   36.263905] ReiserFS: sdb2: Removing [26 25840 0x0 SD]..done
[   36.263916] ReiserFS: sdb2: There were 3 uncompleted unlinks/truncates. Completed
[   36.999499] type=1505 audit(1236792689.647:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4365
[   37.060210] type=1505 audit(1236792689.711:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4370
[   37.060310] type=1505 audit(1236792689.711:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4370
[   37.120667] ip_tables: (C) 2000-2006 Netfilter Core Team
[   37.390717] ACPI: WMI: Mapper loaded
[   37.878921] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[   37.969205] ppdev: user-space parallel port driver
[   39.237368] Bluetooth: Core ver 2.13
[   39.237475] NET: Registered protocol family 31
[   39.237477] Bluetooth: HCI device and connection manager initialized
[   39.237478] Bluetooth: HCI socket layer initialized
[   39.244458] Bluetooth: L2CAP ver 2.11
[   39.244460] Bluetooth: L2CAP socket layer initialized
[   39.250026] Bluetooth: SCO (Voice Link) ver 0.6
[   39.250028] Bluetooth: SCO socket layer initialized
[   39.255841] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   39.255844] Bluetooth: BNEP filters: protocol multicast
[   39.272269] Bridge firewalling registered
[   39.415009] Bluetooth: RFCOMM socket layer initialized
[   39.415019] Bluetooth: RFCOMM TTY layer initialized
[   39.415019] Bluetooth: RFCOMM ver 1.10
[   43.487584] sky2 eth1: enabling interface
[   45.317658] sky2 eth1: Link is up at 100 Mbps, full duplex, flow control both
[   52.222305] NET: Registered protocol family 17
[   53.338523] NET: Registered protocol family 10
[   53.338808] lo: Disabled Privacy Extensions
[   53.339370] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   55.104665] wlan0: authenticate with AP 00:60:b3:c4:d4:5e
[   55.107403] wlan0: authenticated
[   55.107406] wlan0: associate with AP 00:60:b3:c4:d4:5e
[   55.113902] wlan0: RX AssocResp from 00:60:b3:c4:d4:5e (capab=0x461 status=0 aid=2)
[   55.113904] wlan0: associated
[   55.114112] wlan0: disassociating by local choice (reason=3)
[   63.932002] eth1: no IPv6 routers present
[   69.138419] UDF-fs: No VRS found
[   69.250283] ISO 9660 Extensions: Microsoft Joliet Level 3
[   69.325275] ISO 9660 Extensions: RRIP_1991A
[  432.726891] PPP generic driver version 2.4.2


[metiz]

при выборе creative alsa driver x-fi выдает ошибку audiotestsrc wave=sine freq=512 ! audioconvert ! audioresample ! gconfaudiosink: Не удалось открыть устройство для воспроизведения.

под рутом все работает нормально.

может кто то знает как сделать для обычного пользователя?

[Alexkeny]

Linux-драйвер для аудиокарты Creative X-Fi войдет в состав ядра
C ядра версии 2.6.31 уже появится.

[iHaniu]

хм... скачал установил но в Система - Параметры - звук не появилось Creative X FI
там вообще ничо нету

[Ubuntu-user]

У меня x-fi xtreme audio выдает при установке в терминале следующее:

Код: [Выделить]

FATAL: Error inserting ctxfi (/lib/modules/2.6.28-13-generic/kernel/drivers/ssound/ctxfi.ko): Unknown symbol in module, or unknown parameter (see dmesg)
make: *** [install] Ошибка 1


[Panic! At the Kernel]

Привет. Нашел инструкцию по установке беты ALSA с поддержкой X-Fi:тыц. Сам поставил и пока не обнаружил неудобств,но микрофон кажись пока не работает.

upd и судя по всему нормально заработало микширование: теперь могу слушать музыку и гонять ut2004,а раньше ut тянула одеяло на себя

[metiz]

поставил по инструкции, вроде работает вот только не 5,1 хотя дополнительные параметры появились..

[sergicus]

Привет. Нашел инструкцию по установке беты ALSA с поддержкой X-Fi:тыц. Сам поставил и пока не обнаружил неудобств

А звук  5.1 Работает ?

Я это к чему говорю (и почему задаю такоей вопрос)  - из английской версии статьи и скриншота я не понял этого ибо если 5.1 не работает переходить нет смысла

[Alexkeny]

Если кто может протестируйте 5.1 на системе, где подкрутить настройки см. первый пост, поидеи должно работать

[Siegi]

обновился до 9.10 - на 31-ом ядрышке всё заработало, не обманули)

[CityAceE]

Подтверждаю, работает! Наконец-то закончились мучения с установкой дополнительных драйверов и свистопляской с двумя звуковыми картами в моей системе, подключенными к разным колонкам.

[metiz]

ага, все отлично работает, тему можно закрывать 

[Alexkeny]

здорово!+) спасибо всем кто отписался!
закрывать пока не буду, может ещё вопросы появятся