[WiFi Hostapd AP] Программа для создания точки доступа WiFi

[Кровавый]

Он и есть 

Опять то же самое?
Наблюдал у себя вчера, когда загружался с LiveCD.
Буду думать, что с этим делать.
Но по-позже. В субботу, возможно.
Ужаснувшись тому, что для Ubuntu надо тянуть 80 мб только из-за kdesudo, я решил сделать выбор между gksu и kdesudo, но тут же попал в очень интересную петлю. Теперь думаю, как решить эту проблему.

[Кровавый]

Следующая версия:
http://code.google.com/p/wifi-hostapd-ap/downloads/detail?name=WiFi_Hostapd_AP-03.03.12.tar.gz&can=2&q=#makechanges

Зависимости:

Код: [Выделить]

sudo apt-get install wireless-tools bridge-utils hostapd dnsmasq libqtgui4
Изменения:
1. Использование DNSMASQ заместо DHCP-сервера;
2. Возможность использовать gksu (запустите приложение с ключом "-su" из терминала)
3. Фиксы перевода
4. Исправление некоторых багов

Комментарий:
пока не много успел, так как весь день прокатался по делам. По мере возможности буду вносить изменения.

PS, не могу проверить на Ubuntu 11.10, так как в LiveCD не работает скрипт запуска Hostapd.

[Seregka74]

Ubuntu 11.10:

(Нажмите, чтобы показать/скрыть)

Start activation.
 
ifconfig wlan0 down  ...  OK
ifconfig wlan0 192.168.0.1 netmask 255.255.255.0 up | ifconfig wlan0 | grep 192.168.0.1  ...  OK
ifconfig | grep wlan0  ...  OK
ifconfig | grep wlan0  ...  OK
iptables -t nat -A POSTROUTING -o  wlan1  -j MASQUERADE  ...  OK
/etc/init.d/dnsmasq start  ... OK -> TEST:
QThread::wait: Thread tried to wait on itself
/etc/init.d/dnsmasq status | grep "(running)"  ...  OK
/etc/init.d/hostapd start  ... OK -> TEST:
/etc/init.d/hostapd status | grep "hostapd is running"  ...  FAIL
AP is NOT running!
 
Testing AP... 
ifconfig | grep wlan0  ... OK
/etc/init.d/dnsmasq status | grep "(running)"  ... OK
/etc/init.d/hostapd status | grep "hostapd is running"  ... FAIL
AP not running.

[Кровавый]

Ubuntu 11.10:

(Нажмите, чтобы показать/скрыть)

Start activation.
 
ifconfig wlan0 down  ...  OK
ifconfig wlan0 192.168.0.1 netmask 255.255.255.0 up | ifconfig wlan0 | grep 192.168.0.1  ...  OK
ifconfig | grep wlan0  ...  OK
ifconfig | grep wlan0  ...  OK
iptables -t nat -A POSTROUTING -o  wlan1  -j MASQUERADE  ...  OK
/etc/init.d/dnsmasq start  ... OK -> TEST:
QThread::wait: Thread tried to wait on itself
/etc/init.d/dnsmasq status | grep "(running)"  ...  OK
/etc/init.d/hostapd start  ... OK -> TEST:
/etc/init.d/hostapd status | grep "hostapd is running"  ...  FAIL
AP is NOT running!
 
Testing AP... 
ifconfig | grep wlan0  ... OK
/etc/init.d/dnsmasq status | grep "(running)"  ... OK
/etc/init.d/hostapd status | grep "hostapd is running"  ... FAIL
AP not running.

Код: [Выделить]

sudo /etc/init.d/hostapd start
Вывод сюда.

Предварительно нужно забекапить файл /etc/init.d/hostapd куда-нибудь, и привести к  такому виду:

(Нажмите, чтобы показать/скрыть)

Код: [Выделить]

#!/bin/sh
### BEGIN INIT INFO
# Provides:        hostapd
# Required-Start:    $remote_fs
# Required-Stop:    $remote_fs
# Should-Start:        $network
# Should-Stop:
# Default-Start:    2 3 4 5
# Default-Stop:        0 1 6
# Short-Description:    Advanced IEEE 802.11 management daemon
# Description:        Userspace IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP
#            Authenticator
### END INIT INFO

PATH=/sbin:/bin:/usr/sbin:/usr/bin
DAEMON_SBIN=/usr/sbin/hostapd
DAEMON_DEFS=/etc/default/hostapd
DAEMON_CONF=/etc/hostapd/hostapd.conf
NAME=hostapd
DESC="advanced IEEE 802.11 management"
PIDFILE=/var/run/hostapd.pid

[ -x "$DAEMON_SBIN" ] || exit 0
[ -s "$DAEMON_DEFS" ] && . /etc/default/hostapd
[ -r "$DAEMON_CONF" ] || exit 0

DAEMON_OPTS="-B -P $PIDFILE $DAEMON_OPTS $DAEMON_CONF"

. /lib/lsb/init-functions

case "$1" in
  start)
    log_daemon_msg "Starting $DESC" "$NAME"
    start-stop-daemon --start --oknodo --quiet --exec "$DAEMON_SBIN" \
        --pidfile "$PIDFILE" -- $DAEMON_OPTS >/dev/null
    log_end_msg "$?"
    ;;
  stop)
    log_daemon_msg "Stopping $DESC" "$NAME"
    start-stop-daemon --stop --oknodo --quiet --exec "$DAEMON_SBIN" \
        --pidfile "$PIDFILE"
    log_end_msg "$?"
    ;;
  reload)
      log_daemon_msg "Reloading $DESC" "$NAME"
    start-stop-daemon --stop --signal HUP --exec "$DAEMON_SBIN" \
        --pidfile "$PIDFILE"
    log_end_msg "$?"
    ;;
  restart|force-reload)
      $0 stop
    sleep 8
    $0 start
    ;;
  status)
    status_of_proc "$DAEMON_SBIN" "$NAME"
    exit $?
    ;;
  *)
    N=/etc/init.d/$NAME
    echo "Usage: $N {start|stop|restart|force-reload|reload|status}"
    exit 1
    ;;
esac

exit 0


[aleksubuntu]

лог в проге пустой

(Нажмите, чтобы показать/скрыть)

sam@sam-Aspire-5745DG:~$ sudo apt-get install wireless-tools bridge-utils hostapd dnsmasq libqtgui4
[sudo] password for sam:
Чтение списков пакетов... Готово
Построение дерева зависимостей       
Чтение информации о состоянии... Готово
Уже установлена самая новая версия wireless-tools.
Уже установлена самая новая версия hostapd.
Уже установлена самая новая версия bridge-utils.
Уже установлена самая новая версия libqtgui4.
Предлагаемые пакеты:
  resolvconf
НОВЫЕ пакеты, которые будут установлены:
  dnsmasq
обновлено 0, установлено 1 новых пакетов, для удаления отмечено 0 пакетов, и 0 пакетов не обновлено.
Необходимо скачать 14,3 kБ архивов.
После данной операции, объём занятого дискового пространства возрастёт на 123 kB.
Хотите продолжить [Д/н]?
Получено:1 http://mirror-kt.neolabs.kz/ubuntu/ oneiric/universe dnsmasq all 2.57-1ubuntu1 [14,3 kB]
Получено 14,3 kБ за 0с (36,4 kБ/c)
Выбор ранее не выбранного пакета dnsmasq.
(Чтение базы данных ... на данный момент установлено 200594 файла и каталога.)
Распаковывается пакет dnsmasq (из файла .../dnsmasq_2.57-1ubuntu1_all.deb)...
Обрабатываются триггеры для ureadahead ...
ureadahead will be reprofiled on next reboot
Настраивается пакет dnsmasq (2.57-1ubuntu1) ...
 * Starting DNS forwarder and DHCP server dnsmasq              [ OK ]
sam@sam-Aspire-5745DG:~$ /home/sam/WiFi_Hostapd_AP-03.03.12/WiFi_Hostapd_AP
USER: get ROOT ... 
Get root with  "kdesudo " .
ROOT: ok. Begin ... 
Testing AP... 
ifconfig | grep wlan0  ... FAIL
/etc/init.d/dnsmasq status | grep "(running)"  ... OK
/etc/init.d/hostapd status | grep "hostapd is running"  ... OK
AP not running.
 
Start activation.
 
ifconfig wlan0 down  ...  FAIL
AP is NOT running!
 
Testing AP... 
ifconfig | grep wlan0  ... FAIL
/etc/init.d/dnsmasq status | grep "(running)"  ... OK
/etc/init.d/hostapd status | grep "hostapd is running"  ... FAIL
AP not running.
 
sam@sam-Aspire-5745DG:~$ sudo /etc/init.d/hostapd start
sam@sam-Aspire-5745DG:~$

[Кровавый]

Файлы конфигурации сохранены? Откройте настройки и нажмите "Сохранить" во всех вкладках. Это во-первых.

Во-вторых, судя по выводу init.d, у вас 11.10. Читайте в посте выше, надо подкорректировать скрипт запуска Hostapd.
В-третьих, у вас wlan0 есть вообще в системе?

Код: [Выделить]

sudo ifconfig wlan0 downВывод сюда, пожалуйста.

[aleksubuntu]

sam@sam-Aspire-5745DG:~$ sudo ifconfig wlan0 down
[sudo] password for sam:
sam@sam-Aspire-5745DG:~$

есть конечно

[Кровавый]

sam@sam-Aspire-5745DG:~$ sudo ifconfig wlan0 down
[sudo] password for sam:
sam@sam-Aspire-5745DG:~$

есть конечно

А если так?

[aleksubuntu]

(Нажмите, чтобы показать/скрыть)

sam@sam-Aspire-5745DG:~$ /home/sam/WiFi_Hostapd_AP-04.03.12/WiFi_Hostapd_AP
USER: get ROOT ... 
Get root with  "kdesudo " .
ROOT: ok. Begin ... 
Testing AP... 
ifconfig | grep wlan0  ... OK
/etc/init.d/dnsmasq status | grep "(running)"  ... OK
/etc/init.d/hostapd status | grep "hostapd is running"  ... OK
AP is running.
 
Start disactivation.
 
QThread::wait: Thread tried to wait on itself
ifconfig wlan0 down  ...  FAIL
AP is NOT stoped!
 
QThread::wait: Thread tried to wait on itself
Testing AP... 
ifconfig | grep wlan0  ... OK
/etc/init.d/dnsmasq status | grep "(running)"  ... OK
/etc/init.d/hostapd status | grep "hostapd is running"  ... OK
AP is running.
 
sam@sam-Aspire-5745DG:~$ /home/sam/WiFi_Hostapd_AP-04.03.12/WiFi_Hostapd_AP
USER: get ROOT ... 
Get root with  "kdesudo " .
ROOT: ok. Begin ... 
Testing AP... 
ifconfig | grep wlan0  ... FAIL
/etc/init.d/dnsmasq status | grep "(running)"  ... OK
/etc/init.d/hostapd status | grep "hostapd is running"  ... OK
AP not running.
 
Start activation.
 
ifconfig wlan0 down | ifconfig wlan0 | grep "RUNNING"  ...  OK
ifconfig wlan0 192.168.0.1 netmask 255.255.255.0 up | ifconfig wlan0 | grep 192.168.0.1  ...  OK
ifconfig | grep wlan0  ...  OK
ifconfig | grep wlan0  ...  OK
iptables -t nat -A POSTROUTING -o  eth0  -j MASQUERADE  ...  OK
/etc/init.d/dnsmasq start  ... OK -> TEST:
QThread::wait: Thread tried to wait on itself
/etc/init.d/dnsmasq status | grep "(running)"  ...  OK
/etc/init.d/hostapd start  ... OK -> TEST:
/etc/init.d/hostapd status | grep "hostapd is running"  ...  FAIL
AP is NOT running!
 
Testing AP... 
ifconfig | grep wlan0  ... OK
/etc/init.d/dnsmasq status | grep "(running)"  ... OK
/etc/init.d/hostapd status | grep "hostapd is running"  ... FAIL
AP not running.
 
sam@sam-Aspire-5745DG:~$

(Нажмите, чтобы показать/скрыть)

05.03.12 17:38:42   cfg80211   World regulatory domain updated:
05.03.12 17:38:42   cfg80211   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
05.03.12 17:38:42   cfg80211   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
05.03.12 17:38:42   cfg80211   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
05.03.12 17:38:42   cfg80211   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
05.03.12 17:38:42   cfg80211   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
05.03.12 17:38:42   cfg80211   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
05.03.12 17:38:42   lp   driver loaded but no devices found
05.03.12 17:38:42      Linux video capture interface: v2.00
05.03.12 17:38:42      Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000
05.03.12 17:38:42   uvcvideo   Found UVC 1.00 device 1.3M HD WebCam (04fc:2801)
05.03.12 17:38:42   input   SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
05.03.12 17:38:42   input   1.3M HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input9
05.03.12 17:38:42   usbcore   registered new interface driver uvcvideo
05.03.12 17:38:42      USB Video Class driver (v1.1.0)
05.03.12 17:38:43   Bluetooth   Atheros AR30xx firmware driver ver 1.0
05.03.12 17:38:43   ath9k 0000   3:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
05.03.12 17:38:43   ath9k 0000   3:00.0: setting latency timer to 64
05.03.12 17:38:43   ath   EEPROM regdomain: 0x67
05.03.12 17:38:43   ath   EEPROM indicates we should expect a direct regpair map
05.03.12 17:38:43   ath   Country alpha2 being used: 00
05.03.12 17:38:43   ath   Regpair used: 0x67
05.03.12 17:38:43   cfg80211   Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
05.03.12 17:38:43   cfg80211   Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
05.03.12 17:38:43   cfg80211   Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   5140000 KHz - 5360000 KHz @ KHz), (N/A mBi, 3000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   5140000 KHz - 5360000 KHz @ KHz), (N/A mBi, 3000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   5140000 KHz - 5360000 KHz @ KHz), (N/A mBi, 3000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   5140000 KHz - 5360000 KHz @ KHz), (N/A mBi, 3000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   5140000 KHz - 5360000 KHz @ KHz), (N/A mBi, 3000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   5140000 KHz - 5360000 KHz @ KHz), (N/A mBi, 3000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   5140000 KHz - 5360000 KHz @ KHz), (N/A mBi, 3000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   5140000 KHz - 5360000 KHz @ KHz), (N/A mBi, 3000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   5460000 KHz - 5860000 KHz @ KHz), (N/A mBi, 3000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   5460000 KHz - 5860000 KHz @ KHz), (N/A mBi, 3000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   5460000 KHz - 5860000 KHz @ KHz), (N/A mBi, 3000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   5460000 KHz - 5860000 KHz @ KHz), (N/A mBi, 3000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   5460000 KHz - 5860000 KHz @ KHz), (N/A mBi, 3000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 5600 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   5460000 KHz - 5860000 KHz @ KHz), (N/A mBi, 3000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 5620 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   5460000 KHz - 5860000 KHz @ KHz), (N/A mBi, 3000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 5640 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   5460000 KHz - 5860000 KHz @ KHz), (N/A mBi, 3000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   5460000 KHz - 5860000 KHz @ KHz), (N/A mBi, 3000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   5460000 KHz - 5860000 KHz @ KHz), (N/A mBi, 3000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   5460000 KHz - 5860000 KHz @ KHz), (N/A mBi, 3000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   5460000 KHz - 5860000 KHz @ KHz), (N/A mBi, 3000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   5460000 KHz - 5860000 KHz @ KHz), (N/A mBi, 3000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   5460000 KHz - 5860000 KHz @ KHz), (N/A mBi, 3000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   5460000 KHz - 5860000 KHz @ KHz), (N/A mBi, 3000 mBm)
05.03.12 17:38:43   cfg80211   Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
05.03.12 17:38:43   cfg80211   5460000 KHz - 5860000 KHz @ KHz), (N/A mBi, 3000 mBm)
05.03.12 17:38:43   cfg80211   Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
05.03.12 17:38:43   ieee80211 phy0   Selected rate control algorithm 'ath9k_rate_control'
05.03.12 17:38:43      Registered led device: ath9k-phy0
05.03.12 17:38:43   ieee80211 phy0   Atheros AR9285 Rev:2 mem=0xffffc900050a0000, irq=17
05.03.12 17:38:44   nvidia   module license 'NVIDIA' taints kernel.
05.03.12 17:38:44      Disabling lock debugging due to kernel taint
05.03.12 17:38:44   nvidia 0000   1:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
05.03.12 17:38:44   nvidia 0000   1:00.0: setting latency timer to 64
05.03.12 17:38:44   vgaarb   device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
05.03.12 17:38:44   NVRM   loading NVIDIA UNIX x86_64 Kernel Module 280.13 Wed Jul 27 16:53:56 PDT 2011
05.03.12 17:38:44      type=1400 audit(1330951123.053:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=762 comm="apparmor_parser"
05.03.12 17:38:44      type=1400 audit(1330951123.053:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=761 comm="apparmor_parser"
05.03.12 17:38:44      type=1400 audit(1330951123.053:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=867 comm="apparmor_parser"
05.03.12 17:38:44      type=1400 audit(1330951123.053:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=762 comm="apparmor_parser"
05.03.12 17:38:44      type=1400 audit(1330951123.053:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=761 comm="apparmor_parser"
05.03.12 17:38:44      type=1400 audit(1330951123.053:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=867 comm="apparmor_parser"
05.03.12 17:38:44      type=1400 audit(1330951123.053:: apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=762 comm="apparmor_parser"
05.03.12 17:38:44      type=1400 audit(1330951123.053:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=761 comm="apparmor_parser"
05.03.12 17:38:44      type=1400 audit(1330951123.053:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=867 comm="apparmor_parser"
05.03.12 17:38:44   usbcore   registered new interface driver ath3k
05.03.12 17:38:44   usb 2-1.5   USB disconnect, device number 5
05.03.12 17:38:44   HDA Intel 0000   0:1b.0: BAR 0: set to [mem 0xb7100000-0xb7103fff 64bit] (PCI address [0xb7100000-0xb7103fff])
05.03.12 17:38:44   HDA Intel 0000   0:1b.0: enabling device (0000 -> 0002)
05.03.12 17:38:44   HDA Intel 0000   0:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
05.03.12 17:38:44   HDA Intel 0000   0:1b.0: irq 42 for MSI/MSI-X
05.03.12 17:38:44   HDA Intel 0000   0:1b.0: setting latency timer to 64
05.03.12 17:38:45   hda_codec   ALC271X: BIOS auto-probing.
05.03.12 17:38:45   input   HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
05.03.12 17:38:45   input   HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
05.03.12 17:38:45   HDA Intel 0000   1:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
05.03.12 17:38:45   hda_intel   Disabling MSI
05.03.12 17:38:45   HDA Intel 0000   1:00.1: setting latency timer to 64
05.03.12 17:38:45   usb 2-1.5   new full speed USB device number 6 using ehci_hcd
05.03.12 17:38:45   Bluetooth   Core ver 2.16
05.03.12 17:38:45   NET   Registered protocol family 31
05.03.12 17:38:45   Bluetooth   HCI device and connection manager initialized
05.03.12 17:38:45   Bluetooth   HCI socket layer initialized
05.03.12 17:38:45   Bluetooth   L2CAP socket layer initialized
05.03.12 17:38:45   Bluetooth   SCO socket layer initialized
05.03.12 17:38:45   Bluetooth   Generic Bluetooth USB driver ver 0.6
05.03.12 17:38:45   usbcore   registered new interface driver btusb
05.03.12 17:38:46   init   failsafe main process (903) killed by TERM signal
05.03.12 17:38:46   HDMI status   Pin=5 Presence_Detect=0 ELD_Valid=0
05.03.12 17:38:46   HDMI status   Pin=5 Presence_Detect=0 ELD_Valid=0
05.03.12 17:38:46   HDMI status   Pin=5 Presence_Detect=0 ELD_Valid=0
05.03.12 17:38:46   HDMI status   Pin=5 Presence_Detect=0 ELD_Valid=0
05.03.12 17:38:46   input   HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
05.03.12 17:38:46   input   HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
05.03.12 17:38:46   input   HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
05.03.12 17:38:46   input   HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
05.03.12 17:38:49      type=1400 audit(1330951127.981:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1042 comm="apparmor_parser"
05.03.12 17:38:50   audit_printk_skb   6 callbacks suppressed
05.03.12 17:38:50      type=1400 audit(1330951128.997:14): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=1046 comm="apparmor_parser"
05.03.12 17:38:50      type=1400 audit(1330951128.997:15): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=1046 comm="apparmor_parser"
05.03.12 17:38:50      type=1400 audit(1330951129.021:16): apparmor="STATUS" operation="profile_load" name="/usr/sbin/dhcpd" pid=1045 comm="apparmor_parser"
05.03.12 17:38:50      type=1400 audit(1330951129.025:17): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1047 comm="apparmor_parser"
05.03.12 17:38:50      type=1400 audit(1330951129.357:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1044 comm="apparmor_parser"
05.03.12 17:38:50      type=1400 audit(1330951129.357:19): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1044 comm="apparmor_parser"
05.03.12 17:38:50   ppdev   user-space parallel port driver
05.03.12 17:38:51      type=1400 audit(1330951129.937:20): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1092 comm="apparmor_parser"
05.03.12 17:38:51      type=1400 audit(1330951129.937:21): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1092 comm="apparmor_parser"
05.03.12 17:38:53   init   apport pre-start process (1125) terminated with status 1
05.03.12 17:38:53   init   apport post-stop process (1170) terminated with status 1
05.03.12 17:38:53   atl1c 0000   2:00.0: irq 43 for MSI/MSI-X
05.03.12 17:38:53   atl1c 0000   2:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
05.03.12 17:38:53   ADDRCONF(NETDEV_UP)   wlan0: link is not ready
05.03.12 17:38:59   Bluetooth   BNEP (Ethernet Emulation) ver 1.3
05.03.12 17:38:59   Bluetooth   BNEP filters: protocol multicast
05.03.12 17:38:59   Bluetooth   RFCOMM TTY layer initialized
05.03.12 17:38:59   Bluetooth   RFCOMM socket layer initialized
05.03.12 17:38:59   Bluetooth   RFCOMM ver 1.11
05.03.12 17:39:02   EXT4-fs (sda5)   re-mounted. Opts: errors=remount-ro,commit=0
05.03.12 17:39:04   init   plymouth-stop pre-start process (1471) terminated with status 1
05.03.12 17:39:04   eth0   no IPv6 routers present
05.03.12 17:40:10   EXT4-fs (sda5)   re-mounted. Opts: errors=remount-ro,commit=0
05.03.12 18:07:45   ADDRCONF(NETDEV_UP)   wlan0: link is not ready
05.03.12 18:07:45   ip_tables   (C) 2000-2006 Netfilter Core Team
05.03.12 18:07:45      nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
05.03.12 18:08:51   ADDRCONF(NETDEV_UP)   wlan0: link is not ready
05.03.12 18:10:06   hda-intel   IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.

[Кровавый]

Код: [Выделить]

cat /etc/init.d/hostapd

[aleksubuntu]

(Нажмите, чтобы показать/скрыть)

sam@sam-Aspire-5745DG:~$ cat /etc/init.d/hostapd
#!/bin/sh

### BEGIN INIT INFO
# Provides:             hostapd
# Required-Start:       $remote_fs
# Required-Stop:        $remote_fs
# Should-Start:         $network
# Should-Stop:
# Default-Start:        2 3 4 5
# Default-Stop:         0 1 6
# Short-Description:    Advanced IEEE 802.11 management daemon
# Description:          Userspace IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP
#                       Authenticator
### END INIT INFO

PATH=/sbin:/bin:/usr/sbin:/usr/bin
DAEMON_SBIN=/usr/sbin/hostapd
DAEMON_DEFS=/etc/default/hostapd
DAEMON_CONF=
NAME=hostapd
DESC="advanced IEEE 802.11 management"
PIDFILE=/var/run/hostapd.pid

[ -x "$DAEMON_SBIN" ] || exit 0
[ -s "$DAEMON_DEFS" ] && . /etc/default/hostapd
[ -r "$DAEMON_CONF" ] || exit 0

DAEMON_OPTS="-B -P $PIDFILE $DAEMON_OPTS $DAEMON_CONF"

. /lib/lsb/init-functions

case "$1" in
  start)
        log_daemon_msg "Starting $DESC" "$NAME"
        start-stop-daemon --start --oknodo --quiet --exec "$DAEMON_SBIN" \
                --pidfile "$PIDFILE" -- $DAEMON_OPTS >/dev/null
        log_end_msg "$?"
        ;;
  stop)
        log_daemon_msg "Stopping $DESC" "$NAME"
        start-stop-daemon --stop --oknodo --quiet --exec "$DAEMON_SBIN" \
                --pidfile "$PIDFILE"
        log_end_msg "$?"
        ;;
  reload)
        log_daemon_msg "Reloading $DESC" "$NAME"
        start-stop-daemon --stop --signal HUP --exec "$DAEMON_SBIN" \
                --pidfile "$PIDFILE"
        log_end_msg "$?"
        ;;
  restart|force-reload)
        $0 stop
        sleep 8
        $0 start
        ;;
  status)
        status_of_proc "$DAEMON_SBIN" "$NAME"
        exit $?
        ;;
  *)
        N=/etc/init.d/$NAME
        echo "Usage: $N {start|stop|restart|force-reload|reload|status}" >&2
        exit 1
        ;;
esac

exit 0
sam@sam-Aspire-5745DG:~$

[Кровавый]

aleksubuntu, прочтите, пожалуйста, первый пост в теме. Я сделал примечание для пользователей Ubuntu 11.10.

[aleksubuntu]

ошибка активации hostapd

(Нажмите, чтобы показать/скрыть)

sam@sam-Aspire-5745DG:~$ sudo kate /etc/init.d/hostapd
[sudo] password for sam:
Error: "/var/tmp/kdecache-sam" is owned by uid 1000 instead of uid 0.
Error: "/tmp/kde-sam" is owned by uid 1000 instead of uid 0.
Error: "/tmp/ksocket-sam" is owned by uid 1000 instead of uid 0.
sam@sam-Aspire-5745DG:~$ /home/sam/WiFi_Hostapd_AP-04.03.12/WiFi_Hostapd_AP
USER: get ROOT ... 
Get root with  "kdesudo " .
ROOT: ok. Begin ... 
Testing AP... 
ifconfig | grep wlan0  ... OK
/etc/init.d/dnsmasq status | grep "(running)"  ... OK
/etc/init.d/hostapd status | grep "hostapd is running"  ... OK
AP is running.
 
Start disactivation.
 
QThread::wait: Thread tried to wait on itself
ifconfig wlan0 down  ...  FAIL
AP is NOT stoped!
 
QThread::wait: Thread tried to wait on itself
Testing AP... 
ifconfig | grep wlan0  ... OK
/etc/init.d/dnsmasq status | grep "(running)"  ... OK
/etc/init.d/hostapd status | grep "hostapd is running"  ... OK
AP is running.
 
sam@sam-Aspire-5745DG:~$ /home/sam/WiFi_Hostapd_AP-04.03.12/WiFi_Hostapd_AP
USER: get ROOT ... 
Get root with  "kdesudo " .
ROOT: ok. Begin ... 
Testing AP... 
ifconfig | grep wlan0  ... FAIL
/etc/init.d/dnsmasq status | grep "(running)"  ... OK
/etc/init.d/hostapd status | grep "hostapd is running"  ... OK
AP not running.
 
Start activation.
 
ifconfig wlan0 down | ifconfig wlan0 | grep "RUNNING"  ...  OK
ifconfig wlan0 192.168.0.1 netmask 255.255.255.0 up | ifconfig wlan0 | grep 192.168.0.1  ...  OK
ifconfig | grep wlan0  ...  OK
ifconfig | grep wlan0  ...  OK
iptables -t nat -A POSTROUTING -o  eth0  -j MASQUERADE  ...  OK
/etc/init.d/dnsmasq start  ... OK -> TEST:
QThread::wait: Thread tried to wait on itself
/etc/init.d/dnsmasq status | grep "(running)"  ...  OK
/etc/init.d/hostapd start  ... OK -> TEST:
/etc/init.d/hostapd status | grep "hostapd is running"  ...  FAIL
AP is NOT running!
 
Testing AP... 
ifconfig | grep wlan0  ... OK
/etc/init.d/dnsmasq status | grep "(running)"  ... OK
/etc/init.d/hostapd status | grep "hostapd is running"  ... FAIL
AP not running.
 
sam@sam-Aspire-5745DG:~$ /home/sam/WiFi_Hostapd_AP-04.03.12/WiFi_Hostapd_AP
USER: get ROOT ... 
Get root with  "kdesudo " .
ROOT: ok. Begin ... 
Testing AP... 
ifconfig | grep wlan0  ... OK
/etc/init.d/dnsmasq status | grep "(running)"  ... OK
/etc/init.d/hostapd status | grep "hostapd is running"  ... OK
AP is running.
 
Start disactivation.
 
QThread::wait: Thread tried to wait on itself
ifconfig wlan0 down  ...  FAIL
AP is NOT stoped!
 
QThread::wait: Thread tried to wait on itself
Testing AP... 
ifconfig | grep wlan0  ... OK
/etc/init.d/dnsmasq status | grep "(running)"  ... OK
/etc/init.d/hostapd status | grep "hostapd is running"  ... OK
AP is running.
 
sam@sam-Aspire-5745DG:~$ /home/sam/WiFi_Hostapd_AP-04.03.12/WiFi_Hostapd_AP
USER: get ROOT ... 
Get root with  "kdesudo " .
ROOT: ok. Begin ... 
Testing AP... 
ifconfig | grep wlan0  ... FAIL
/etc/init.d/dnsmasq status | grep "(running)"  ... OK
/etc/init.d/hostapd status | grep "hostapd is running"  ... OK
AP not running.
 
Start activation.
 
ifconfig wlan0 down | ifconfig wlan0 | grep "RUNNING"  ...  OK
ifconfig wlan0 192.168.0.1 netmask 255.255.255.0 up | ifconfig wlan0 | grep 192.168.0.1  ...  OK
ifconfig | grep wlan0  ...  OK
ifconfig | grep wlan0  ...  OK
iptables -t nat -A POSTROUTING -o  eth0  -j MASQUERADE  ...  OK
/etc/init.d/dnsmasq start  ... OK -> TEST:
QThread::wait: Thread tried to wait on itself
/etc/init.d/dnsmasq status | grep "(running)"  ...  OK
/etc/init.d/hostapd start  ... OK -> TEST:
/etc/init.d/hostapd status | grep "hostapd is running"  ...  FAIL
AP is NOT running!
 
Testing AP... 
ifconfig | grep wlan0  ... OK
/etc/init.d/dnsmasq status | grep "(running)"  ... OK
/etc/init.d/hostapd status | grep "hostapd is running"  ... FAIL
AP not running.
 
sam@sam-Aspire-5745DG:~$

[Кровавый]

Попробуйте теперь

Код: [Выделить]

sudo /etc/init.d/hostapd start
Если не получится, то

Код: [Выделить]

sudo hostapd /etc/hostapd/hostapd.conf -B
И покажите, пожалуйста, конфигурационный файл hostapd.

[aleksubuntu]

(Нажмите, чтобы показать/скрыть)

sam@sam-Aspire-5745DG:~$ sudo /etc/init.d/hostapd start
[sudo] password for sam:
 * Starting advanced IEEE 802.11 management hostapd            [fail]
sam@sam-Aspire-5745DG:~$ sudo hostapd /etc/hostapd/hostapd.conf -B
Configuration file: /etc/hostapd/hostapd.conf
Line 4: invalid/unknown driver 'hostapd'
1 errors found in configuration file '/etc/hostapd/hostapd.conf'
sam@sam-Aspire-5745DG:~$ sudo kate /etc/hostapd/hostapd.conf
Error: "/var/tmp/kdecache-sam" is owned by uid 1000 instead of uid 0.
Error: "/tmp/kde-sam" is owned by uid 1000 instead of uid 0.
sam@sam-Aspire-5745DG:~$

(Нажмите, чтобы показать/скрыть)

#Name:Default
#Type:Hostapd
interface=wlan0
driver=hostapd
ssid=MyWiFI_AP
country_code=RU
hw_mode=g
channel=7
macaddr_acl=0