Форум русскоязычного сообщества Ubuntu


Следите за новостями русскоязычного сообщества Ubuntu в Twitter-ленте @ubuntu_ru_loco

Автор Тема: Samsung SCX-4600+Zyxel keenetic в Ubuntu  (Прочитано 5501 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Оффлайн maksim_r

  • Автор темы
  • Участник
  • *
  • Сообщений: 110
    • Просмотр профиля
Samsung SCX-4600+Zyxel keenetic в Ubuntu
« : 19 Июль 2013, 19:38:34 »
Доброго времени суток. Возникла следующая проблема. Приобрёл роутер Zyxel Keenetic II. Настроил, в сеть выходит нормально. Решил настроить сетевой принтер(Samsung SCX-4600). В винде всё подцепилось без проблем. А вот с Ubuntu - проблемы (12.04). Настроил следующим образом: Принтеры-Добавить-Найти сетевой принтер. Ввёл в качестве URL адрес ТД (192.168.1.1). Далее автоматом определилось подключение:
Далее выбрал производителя, модель. Настройка закончилась, и было предложено сделать тестовую страницу. Вот тут и вылезла проблема: принтер начал без остановки печать, причем не тестовую страницу, а сообщение об ошибке. Помогло только выдергивание из розетки. Если печатать из файла, то происходит такая же ситуация, но без ошибок(печатается по кругу нужное содержимое). В чём проблема и как её решить? ???
P.S. Пакет samba установлен.

Оффлайн vasilisc

  • Заслуженный пользователь
  • Старожил
  • *
  • Сообщений: 2563
  • г.Северодвинск - строим АПЛ
    • Просмотр профиля
    • Авторские статьи об OpenSource
Re: Samsung SCX-4600+Zyxel keenetic в Ubuntu
« Ответ #1 : 20 Июль 2013, 14:22:44 »
дайте
sudo cat /var/log/cups/error_log
Ускорение http://vasilisc.com/speedup_ubuntu
Железо http://vasilisc.com/hcl/detect.php
Призёр http://vasilisc.com/ubuntu_woman Если помог, то поддержите WM R259039388254

Оффлайн maksim_r

  • Автор темы
  • Участник
  • *
  • Сообщений: 110
    • Просмотр профиля
Re: Samsung SCX-4600+Zyxel keenetic в Ubuntu
« Ответ #2 : 20 Июль 2013, 17:02:20 »
дайте
sudo cat /var/log/cups/error_log

maxim@maxim-530U3C:~$ sudo cat /var/log/cups/error_log
E [20/Jul/2013:16:57:30 +0400] Unknown directive SystemGroup on line 3 of /etc/cups/cupsd.conf.
W [20/Jul/2013:16:59:52 +0400] failed to CreateProfile: org.freedesktop.ColorManager.AlreadyExists:profile id 'Samsung-SCX-4600-serv-Gray..' already exists
W [20/Jul/2013:16:59:52 +0400] failed to CreateDevice: org.freedesktop.ColorManager.AlreadyExists:device id 'cups-Samsung-SCX-4600-serv' already exists
E [20/Jul/2013:16:59:52 +0400] Failed to update TXT record for Samsung SCX-4600-serv @ maxim-530U3C: -2
W [20/Jul/2013:16:59:52 +0400] failed to CreateProfile: org.freedesktop.ColorManager.AlreadyExists:profile id 'Samsung-SCX-4600-serv-Gray..' already exists
W [20/Jul/2013:16:59:52 +0400] failed to CreateDevice: org.freedesktop.ColorManager.AlreadyExists:device id 'cups-Samsung-SCX-4600-serv' already exists
W [20/Jul/2013:16:59:52 +0400] failed to CreateProfile: org.freedesktop.ColorManager.AlreadyExists:profile id 'Samsung-SCX-4600-serv-Gray..' already exists
W [20/Jul/2013:16:59:52 +0400] failed to CreateDevice: org.freedesktop.ColorManager.AlreadyExists:device id 'cups-Samsung-SCX-4600-serv' already exists
E [20/Jul/2013:17:00:29 +0400] [Job 38] Error writing spool: NT_STATUS_UNSUCCESSFUL

Пользователь решил продолжить мысль 20 Июль 2013, 22:06:09:
Установка драйверов с сайта Samsung проблемы не решила.. Вопрос открыт
« Последнее редактирование: 20 Июль 2013, 22:06:09 от maksim_r »

Оффлайн vasilisc

  • Заслуженный пользователь
  • Старожил
  • *
  • Сообщений: 2563
  • г.Северодвинск - строим АПЛ
    • Просмотр профиля
    • Авторские статьи об OpenSource
Re: Samsung SCX-4600+Zyxel keenetic в Ubuntu
« Ответ #3 : 22 Июль 2013, 08:46:45 »
Можно как вариант в Ubuntu 12.04 подключить секцию proposed и полезет более новое в том числе и cups и ядра и тд и тп.
"Новое" возможно поможет.
Дайте урлу на статью, по которой вы ставили самсунг драйвера.
Ускорение http://vasilisc.com/speedup_ubuntu
Железо http://vasilisc.com/hcl/detect.php
Призёр http://vasilisc.com/ubuntu_woman Если помог, то поддержите WM R259039388254

Оффлайн maksim_r

  • Автор темы
  • Участник
  • *
  • Сообщений: 110
    • Просмотр профиля
Re: Samsung SCX-4600+Zyxel keenetic в Ubuntu
« Ответ #4 : 22 Июль 2013, 20:47:57 »
http://www.samsung.com/ru/support/model/SCX-4600/XEV-downloads# (универсальный драйвер)

Пользователь решил продолжить мысль 22 Июль 2013, 21:50:50:
Обновления из proposed не помогли.. Мне вообще думается: может дело в Samba? Настроилось может неверно что-то?
« Последнее редактирование: 22 Июль 2013, 21:50:50 от maksim_r »

Оффлайн vasilisc

  • Заслуженный пользователь
  • Старожил
  • *
  • Сообщений: 2563
  • г.Северодвинск - строим АПЛ
    • Просмотр профиля
    • Авторские статьи об OpenSource
Re: Samsung SCX-4600+Zyxel keenetic в Ubuntu
« Ответ #5 : 23 Июль 2013, 09:34:19 »
Пробовали подключать принтер без установки самсунговских драйверов?
Ведь принтер сетевой как я понял.
Ускорение http://vasilisc.com/speedup_ubuntu
Железо http://vasilisc.com/hcl/detect.php
Призёр http://vasilisc.com/ubuntu_woman Если помог, то поддержите WM R259039388254

Оффлайн maksim_r

  • Автор темы
  • Участник
  • *
  • Сообщений: 110
    • Просмотр профиля
Re: Samsung SCX-4600+Zyxel keenetic в Ubuntu
« Ответ #6 : 23 Июль 2013, 11:42:51 »
Да, конечно, в самом начале я и подключал без этих драйверов. Результат тот же..

Пользователь решил продолжить мысль 23 Июль 2013, 15:59:58:
Может быть это как-то поможет:


Пользователь решил продолжить мысль 23 Июль 2013, 16:02:53:
maxim@maxim-530U3C:~$ cat '/etc/samba/smb.conf'
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
# A well-established practice is to name the original file
# "smb.conf.master" and create the "real" config file with
# testparm -s smb.conf.master >smb.conf
# This minimizes the size of the really used smb.conf file
# which, according to the Samba Team, impacts performance
# However, use this with caution if your smb.conf file contains nested
# "include" statements. See Debian bug #483187 for a case
# where using a master file is not a good idea.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
   security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
; encrypt passwords = yes

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using. 
; passdb backend = tdbsam

obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe. 
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe. 
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
#   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
; printing = cups
;   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
#   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
#   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
;   winbind enum groups = yes
;   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes
password server = 192.168.1.1
security = server
; guest ok = no
; guest account = nobody

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home director as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server. Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# The following parameter makes sure that only "username" can connect
#
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
; guest ok = no
; read only = yes
create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
; browseable = yes
writeable = yes
guest ok = yes
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   read only = yes
;   locking = no
;   path = /cdrom
;   guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
# cdrom share is accesed. For this to work /etc/fstab must contain
# an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
# is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom

maxim@maxim-530U3C:~$

Пользователь решил продолжить мысль 23 Июль 2013, 16:09:58:


А это непосредственно окно сетевого принтера:


Пользователь решил продолжить мысль 23 Июль 2013, 16:26:27:
Пару раз было немного по-другому: Состояние принтера: Простаивает - Error writing spool: NT_STATUS_PIPE_BROKEN
« Последнее редактирование: 23 Июль 2013, 16:26:35 от maksim_r »

Оффлайн maksim_r

  • Автор темы
  • Участник
  • *
  • Сообщений: 110
    • Просмотр профиля
Re: Samsung SCX-4600+Zyxel keenetic в Ubuntu
« Ответ #7 : 31 Июль 2013, 20:58:50 »
Проблема так и не решена... Может кто-то всё-таки поможет?

Пользователь решил продолжить мысль 01 Август 2013, 18:04:05:
Еще один лог, но уже с роутера:
[I] Aug  1 17:31:15 ndm: kernel: usb 1-2: new high speed USB device using rt3xxx-ehci and address 2.
[I] Aug  1 17:31:15 ndm: kernel: usb 1-2: configuration #1 chosen from 1 choice.
[I] Aug  1 17:31:15 ndm: kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04E8 pid 0x3433.
[E] Aug  1 17:31:15 ndm: Printer::Manager: no printer name string found.
[I] Aug  1 17:31:15 ndm: Printer::Manager: "" attached.
[I] Aug  1 17:31:25 ndm: Cifs::ServerNQ: service started.
[I] Aug  1 17:34:19 ndm: kernel: usb 1-2: USB disconnect, address 2.
[W] Aug  1 17:34:19 ndm: kernel: drivers/usb/class/usblp.c: usblp0: nonzero read/write bulk status received: -71.
[E] Aug  1 17:34:19 ndm: kernel: drivers/usb/class/usblp.c: usblp0: error -19 reading printer status.
[W] Aug  1 17:34:19 ndm: kernel: drivers/usb/class/usblp.c: usblp0: nonzero read/write bulk status received: -71.
[E] Aug  1 17:34:19 ndm: kernel: drivers/usb/class/usblp.c: usblp0: error -19 reading printer status.
[E] Aug  1 17:34:19 ndm: kernel: drivers/usb/class/usblp.c: usblp0: error -19 reading printer status.
[E] Aug  1 17:34:19 ndm: kernel: drivers/usb/class/usblp.c: usblp0: error -19 reading printer status.
[E] Aug  1 17:34:19 ndm: kernel: drivers/usb/class/usblp.c: usblp0: error -19 reading printer status.
[E] Aug  1 17:34:19 ndm: kernel: drivers/usb/class/usblp.c: usblp0: error -19 reading printer status.
[E] Aug  1 17:34:19 ndm: kernel: drivers/usb/class/usblp.c: usblp0: error -19 reading printer status.
[E] Aug  1 17:34:19 ndm: kernel: drivers/usb/class/usblp.c: usblp0: error -19 reading printer status.
[E] Aug  1 17:34:19 ndm: kernel: drivers/usb/class/usblp.c: usblp0: error -19 reading printer status.
[E] Aug  1 17:34:19 ndm: kernel: drivers/usb/class/usblp.c: usblp0: error -19 reading printer status.
[I] Aug  1 17:34:19 ndm: Printer::Manager: "04e8-3433" detached.
[I] Aug  1 17:34:19 ndm: kernel: drivers/usb/class/usblp.c: usblp0: removed.
« Последнее редактирование: 01 Август 2013, 18:04:05 от maksim_r »

Оффлайн antoshkavolkov

  • Новичок
  • *
  • Сообщений: 1
    • Просмотр профиля
Re: Samsung SCX-4600+Zyxel keenetic в Ubuntu
« Ответ #8 : 22 Сентябрь 2014, 15:05:50 »
Вроде как смог с помощью CUPS, натравив на адрес socket://192.168.1.1:9100

 

Страница сгенерирована за 0.111 секунд. Запросов: 24.