Форум русскоязычного сообщества Ubuntu


Получить помощь и пообщаться с другими пользователями Ubuntu можно
на irc канале #ubuntu-ru в сети Freenode
и в Jabber конференции ubuntu@conference.jabber.ru

Автор Тема: ASUS F3JA WEBCAM&Bluetooth  (Прочитано 1402 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Оффлайн 05091011

  • Автор темы
  • Новичок
  • *
  • Сообщений: 5
    • Просмотр профиля
ASUS F3JA WEBCAM&Bluetooth
« : 12 Апрель 2008, 03:11:42 »
Есть машинка ASUS F3JA. Третий день мучаюсь с синим зубом и вебкамерой. Прошу вашей помощи.

(Как то раз удалось запустить синий зуб и он заработал...передал файл на кпк...на следующий день уже не работал. (Перед этим долго долбал консоль...) )

NEED HELP :idiot2:

Оффлайн 05091011

  • Автор темы
  • Новичок
  • *
  • Сообщений: 5
    • Просмотр профиля
Re: ASUS F3JA WEBCAM&Bluetooth
« Ответ #1 : 12 Апрель 2008, 03:15:30 »
dmesg



[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
[    0.000000] Built 1 zonelists.  Total pages: 520129
[    0.000000] Kernel command line: root=UUID=66e156e7-5903-4456-9d6d-fc5a03c37b59 ro quiet splash
[    0.000000] mapped APIC to ffffd000 (fee00000)
[    0.000000] mapped IOAPIC to ffffc000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1731.102 MHz processor.
[   21.097346] Console: colour VGA+ 80x25
[   21.097635] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   21.098009] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   21.214043] Memory: 2067460k/2096896k available (2015k kernel code, 28172k reserved, 915k data, 364k init, 1179392k highmem)
[   21.214053] virtual kernel memory layout:
[   21.214054]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[   21.214056]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   21.214057]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   21.214058]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   21.214059]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
[   21.214061]       .data : 0xc02f7e86 - 0xc03dce84   ( 915 kB)
[   21.214062]       .text : 0xc0100000 - 0xc02f7e86   (2015 kB)
[   21.214065] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   21.214103] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   21.294062] Calibrating delay using timer specific routine.. 3514.36 BogoMIPS (lpj=7028734)
[   21.294090] Security Framework v1.0.0 initialized
[   21.294098] SELinux:  Disabled at boot.
[   21.294112] Mount-cache hash table entries: 512
[   21.294241] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[   21.294250] monitor/mwait feature present.
[   21.294252] using mwait in idle threads.
[   21.294257] CPU: L1 I cache: 32K, L1 D cache: 32K
[   21.294259] CPU: L2 cache: 2048K
[   21.294262] CPU: Physical Processor ID: 0
[   21.294264] CPU: Processor Core ID: 0
[   21.294266] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000
[   21.294276] Compat vDSO mapped to ffffe000.
[   21.294288] Checking 'hlt' instruction... OK.
[   21.310174] SMP alternatives: switching to UP code
[   21.310641] Early unpacking initramfs... done
[   21.645470] ACPI: Core revision 20070126
[   21.645548] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   21.703279] CPU0: Intel Genuine Intel(R) CPU           T2250  @ 1.73GHz stepping 08
[   21.703298] SMP alternatives: switching to SMP code
[   21.703419] Booting processor 1/1 eip 3000
[   21.713795] Initializing CPU#1
[   21.793630] Calibrating delay using timer specific routine.. 3462.48 BogoMIPS (lpj=6924963)
[   21.793637] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[   21.793642] monitor/mwait feature present.
[   21.793646] CPU: L1 I cache: 32K, L1 D cache: 32K
[   21.793648] CPU: L2 cache: 2048K
[   21.793650] CPU: Physical Processor ID: 0
[   21.793652] CPU: Processor Core ID: 1
[   21.793654] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000
[   21.794182] CPU1: Intel Genuine Intel(R) CPU           T2250  @ 1.73GHz stepping 08
[   21.794207] Total of 2 processors activated (6976.84 BogoMIPS).
[   21.794400] ENABLING IO-APIC IRQs
[   21.794611] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   21.941610] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   21.961610] Brought up 2 CPUs
[   22.188739] migration_cost=65
[   22.188879] Booting paravirtualized kernel on bare hardware
[   22.188968] Time:  1:33:30  Date: 03/12/108
[   22.188989] NET: Registered protocol family 16
[   22.189073] EISA bus registered
[   22.189078] ACPI: bus type pci registered
[   22.189272] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
[   22.189274] PCI: Using configuration type 1
[   22.189276] Setting up standard PCI resources
[   22.193761] ACPI: EC: Look up EC in DSDT
[   22.194464] ACPI: EC: GPE=0x1c, ports=0x66, 0x62
[   22.199417] APIC error on CPU1: 00(40)
[   22.272707] ACPI: Interpreter enabled
[   22.272710] ACPI: (supports S0 S1 S3 S4 S5)
[   22.272732] ACPI: Using IOAPIC for interrupt routing
[   22.281295] ACPI: EC: GPE=0x1c, ports=0x66, 0x62
[   22.281434] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   22.281450] PCI: Probing PCI hardware (bus 00)
[   22.282154] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[   22.282159] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[   22.283494] PCI: Transparent bridge - 0000:00:1e.0
[   22.283586] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   22.283785] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   22.283896] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[   22.284015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[   22.284128] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[   22.284244] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[   22.296950] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
[   22.297108] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 12)
[   22.297290] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 12)
[   22.297446] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 12)
[   22.297601] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
[   22.297756] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
[   22.297912] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 12) *0, disabled.
[   22.298067] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 12)
[   22.298194] Linux Plug and Play Support v0.97 (c) Adam Belay
[   22.298204] pnp: PnP ACPI init
[   22.298211] ACPI: bus type pnp registered
[   22.300392] pnp: PnP ACPI: found 12 devices
[   22.300394] ACPI: ACPI bus type pnp unregistered
[   22.300398] PnPBIOS: Disabled by ACPI PNP
[   22.300441] PCI: Using ACPI for IRQ routing
[   22.300444] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   22.321662] NET: Registered protocol family 8
[   22.321664] NET: Registered protocol family 20
[   22.321725] pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[   22.321734] pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[   22.321737] pnp: 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[   22.321740] pnp: 00:08: iomem range 0xfed45000-0xfed89fff has been reserved
[   22.321744] pnp: 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
[   22.321749] pnp: 00:09: ioport range 0x250-0x253 has been reserved
[   22.321752] pnp: 00:09: ioport range 0x256-0x25f has been reserved
[   22.321755] pnp: 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[   22.321758] pnp: 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
[   22.321761] pnp: 00:09: iomem range 0xfec10000-0xfec17fff has been reserved
[   22.321765] pnp: 00:09: iomem range 0xfec18000-0xfec1ffff has been reserved
[   22.321770] pnp: 00:0a: iomem range 0xe0000000-0xe3ffffff has been reserved
[   22.321775] pnp: 00:0b: iomem range 0x0-0x9ffff could not be reserved
[   22.321778] pnp: 00:0b: iomem range 0xc0000-0xcffff could not be reserved
[   22.321781] pnp: 00:0b: iomem range 0xe0000-0xfffff could not be reserved
[   22.321784] pnp: 00:0b: iomem range 0x100000-0x7fffffff could not be reserved
[   22.325188] Time: tsc clocksource has been installed.
[   22.352095] PCI: Bridge: 0000:00:01.0
[   22.352098]   IO window: 9000-bfff
[   22.352102]   MEM window: fdf00000-fdffffff
[   22.352105]   PREFETCH window: bdf00000-ddefffff
[   22.352109] PCI: Bridge: 0000:00:1c.0
[   22.352113]   IO window: c000-cfff
[   22.352119]   MEM window: fe000000-fe0fffff
[   22.352123]   PREFETCH window: disabled.
[   22.352129] PCI: Bridge: 0000:00:1c.1
[   22.352131]   IO window: disabled.
[   22.352137]   MEM window: fe100000-fe1fffff
[   22.352141]   PREFETCH window: disabled.
[   22.352147] PCI: Bridge: 0000:00:1c.2
[   22.352150]   IO window: d000-dfff
[   22.352157]   MEM window: fe200000-fe9fffff
[   22.352162]   PREFETCH window: ddf00000-dfefffff
[   22.352168] PCI: Bridge: 0000:00:1e.0
[   22.352169]   IO window: disabled.
[   22.352176]   MEM window: fea00000-feafffff
[   22.352180]   PREFETCH window: disabled.
[   22.352197] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   22.352203] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   22.352225] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[   22.352232] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   22.352256] ACPI: PCI Interrupt 0000:00:1c.1 -> GSI 17 (level, low) -> IRQ 17
[   22.352263] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   22.352288] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[   22.352294] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   22.352308] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   22.352320] NET: Registered protocol family 2
[   22.389159] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   22.389226] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[   22.390243] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   22.390611] TCP: Hash tables configured (established 131072 bind 65536)
[   22.390613] TCP reno registered
[   22.401266] checking if image is initramfs... it is
[   22.848845] Switched to high resolution mode on CPU 1
[   22.852726] Switched to high resolution mode on CPU 0
[   23.067913] Freeing initrd memory: 7049k freed
[   23.068031] Simple Boot Flag at 0x52 set to 0x1
[   23.069104] audit: initializing netlink socket (disabled)
[   23.069120] audit(1207964010.372:1): initialized
[   23.069224] highmem bounce pool size: 64 pages
[   23.071131] VFS: Disk quotas dquot_6.5.1
[   23.071181] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   23.071269] io scheduler noop registered
[   23.071271] io scheduler anticipatory registered
[   23.071273] io scheduler deadline registered
[   23.071288] io scheduler cfq registered (default)
[   23.071392] Boot video device is 0000:01:00.0
[   23.071477] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   23.071514] assign_interrupt_mode Found MSI capability
[   23.071517] Allocate Port Service[0000:00:01.0:pcie00]
[   23.071600] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   23.071658] assign_interrupt_mode Found MSI capability
[   23.071661] Allocate Port Service[0000:00:1c.0:pcie00]
[   23.071693] Allocate Port Service[0000:00:1c.0:pcie02]
[   23.071792] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   23.071850] assign_interrupt_mode Found MSI capability
[   23.071853] Allocate Port Service[0000:00:1c.1:pcie00]
[   23.071883] Allocate Port Service[0000:00:1c.1:pcie02]
[   23.071984] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   23.072042] assign_interrupt_mode Found MSI capability
[   23.072045] Allocate Port Service[0000:00:1c.2:pcie00]
[   23.072075] Allocate Port Service[0000:00:1c.2:pcie02]
[   23.072231] isapnp: Scanning for PnP cards...
[   23.426448] isapnp: No Plug & Play device found
[   23.448766] Real Time Clock Driver v1.12ac
[   23.448885] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   23.449974] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   23.450193] input: Macintosh mouse button emulation as /class/input/input0
[   23.450269] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   23.452631] i8042.c: Detected active multiplexing controller, rev 1.1.
[   23.454668] serio: i8042 KBD port at 0x60,0x64 irq 1
[   23.454672] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   23.454675] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   23.454678] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   23.454680] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   23.454849] mice: PS/2 mouse device common for all mice
[   23.455051] EISA: Probing bus 0 at eisa.0
[   23.455091] EISA: Detected 0 cards.
[   23.455182] TCP cubic registered
[   23.455198] NET: Registered protocol family 1
[   23.455220] Using IPI No-Shortcut mode
[   23.455397]   Magic number: 4:21:559
[   23.455458]   hash matches device ptya5
[   23.455730] Freeing unused kernel memory: 364k freed
[   23.545501] input: AT Translated Set 2 keyboard as /class/input/input1
[   24.658725] AppArmor: AppArmor initialized<5>audit(1207964011.872:2):  type=1505 info="AppArmor initialized" pid=1239
[   24.672094] fuse init (API version 7.8)
[   24.682735] Failure registering capabilities with primary security module.
[   24.830886] ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] -  00, should be 16 [20070126]
[   24.830893] ACPI: SSDT 7FFC8620, 049F (r1    AMI   CPU1PM        1 INTL  2002026)
[   24.831332] ACPI: CPU0 (power states: C1[C1] C2[C2])
[   24.831336] ACPI: Processor [CPU1] (supports 8 throttling states)
[   24.831389] ACPI Warning (tbutils-0217): Incorrect checksum in table [SSDT] -  CD, should be BB [20070126]
[   24.831394] ACPI: SSDT 7FFC8AC0, 049F (r1    AMI   CPU2PM        1 INTL  2002026)
[   24.831801] ACPI: CPU1 (power states: C1[C1] C2[C2])
[   24.831805] ACPI: Processor [CPU2] (supports 8 throttling states)
[    3.392000] Marking TSC unstable due to: possible TSC halt in C2.
[    3.392000] ACPI: Thermal Zone [THRM] (68 C)
[    3.396000] Time: acpi_pm clocksource has been installed.
[    3.884000] usbcore: registered new interface driver usbfs
[    3.884000] usbcore: registered new interface driver hub
[    3.892000] usbcore: registered new device driver usb
[    3.920000] USB Universal Host Controller Interface driver v3.0
[    3.920000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[    3.920000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    3.920000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.924000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    3.924000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000ec00
[    3.924000] usb usb1: configuration #1 chosen from 1 choice
[    3.924000] hub 1-0:1.0: USB hub found
[    3.924000] hub 1-0:1.0: 2 ports detected
[    3.944000] SCSI subsystem initialized
[    3.948000] libata version 2.21 loaded.
[    4.028000] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 20
[    4.028000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    4.028000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    4.028000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    4.028000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000e880
[    4.028000] usb usb2: configuration #1 chosen from 1 choice
[    4.028000] hub 2-0:1.0: USB hub found
[    4.028000] hub 2-0:1.0: 2 ports detected
[    4.132000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[    4.132000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    4.132000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    4.132000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    4.132000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[    4.132000] usb usb3: configuration #1 chosen from 1 choice
[    4.132000] hub 3-0:1.0: USB hub found
[    4.132000] hub 3-0:1.0: 2 ports detected
[    4.236000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[    4.236000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[    4.236000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    4.236000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    4.236000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e480
[    4.236000] usb usb4: configuration #1 chosen from 1 choice
[    4.236000] hub 4-0:1.0: USB hub found
[    4.236000] hub 4-0:1.0: 2 ports detected
[    4.268000] usb 1-1: new low speed USB device using uhci_hcd and address 2
[    4.340000] r8169 Gigabit Ethernet driver 2.2LK loaded
[    4.340000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[    4.340000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[    4.340000] eth0: RTL8168b/8111b at 0xf880e000, 00:1b:fc:91:3e:97, XID 38000000 IRQ 16
[    4.340000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[    4.340000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    4.340000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    4.340000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    4.340000] ehci_hcd 0000:00:1d.7: debug port 1
[    4.340000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    4.340000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfebfbc00
[    4.384000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    4.384000] usb usb5: configuration #1 chosen from 1 choice
[    4.384000] hub 5-0:1.0: USB hub found
[    4.384000] hub 5-0:1.0: 8 ports detected
[    4.492000] ata_piix 0000:00:1f.2: version 2.11
[    4.492000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    4.492000] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 19 (level, low) -> IRQ 20
[    4.492000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    4.492000] scsi0 : ata_piix
[    4.492000] scsi1 : ata_piix
[    4.492000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
[    4.492000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
[    4.664000] ata1.00: ATA-7: HTS541080G9SA00, MB4OC60R, max UDMA/100
[    4.664000] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    4.688000] ata1.00: configured for UDMA/100
[    4.792000] usb 1-1: device not accepting address 2, error -71
[    5.036000] ata2.01: ATAPI: HL-DT-ST DVDRAM GMA-4082N, HJ02, max UDMA/33
[    5.208000] ata2.01: configured for UDMA/33
[    5.216000] scsi 0:0:0:0: Direct-Access     ATA      HTS541080G9SA00  MB4O PQ: 0 ANSI: 5
[    5.216000] scsi 1:0:1:0: CD-ROM            HL-DT-ST DVDRAM GMA-4082N HJ02 PQ: 0 ANSI: 5
[    5.216000] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[    5.272000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  MMIO=[feaff800-feafffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    5.284000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[    5.284000] sd 0:0:0:0: [sda] Write Protect is off
[    5.284000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.284000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.284000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[    5.284000] sd 0:0:0:0: [sda] Write Protect is off
[    5.284000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.284000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.284000]  sda:<6>usb 5-8: new high speed USB device using ehci_hcd and address 3
[    5.532000] usb 5-8: configuration #1 chosen from 1 choice
[    5.656000]  sda1 sda2 < sda5 sda6 sda7 sda8 >
[    5.712000] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.716000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.716000] sr 1:0:1:0: Attached scsi generic sg1 type 5
[    5.732000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.732000] Uniform CD-ROM driver Revision: 3.20
[    5.732000] sr 1:0:1:0: Attached scsi CD-ROM sr0
[    5.772000] usb 1-1: new low speed USB device using uhci_hcd and address 4
[    5.944000] usb 1-1: configuration #1 chosen from 1 choice
[    5.960000] usbcore: registered new interface driver hiddev
[    5.972000] input: Logitech Optical USB Mouse as /class/input/input2
[    5.972000] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1
[    5.972000] usbcore: registered new interface driver usbhid
[    5.972000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[    6.144000] Attempting manual resume
[    6.144000] swsusp: Resume From Partition 8:7
[    6.144000] PM: Checking swsusp image.
[    6.144000] PM: Resume from disk failed.
[    6.172000] EXT3-fs: INFO: recovery required on readonly filesystem.
[    6.172000] EXT3-fs: write access will be enabled during recovery.
[    6.556000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e018000394d05c]
[    8.880000] kjournald starting.  Commit interval 5 seconds
[    8.880000] EXT3-fs: sda6: orphan cleanup on readonly fs
[    8.880000] ext3_orphan_cleanup: deleting unreferenced inode 261259
[    8.880000] EXT3-fs: sda6: 1 orphan inode deleted
[    8.880000] EXT3-fs: recovery complete.
[    8.912000] EXT3-fs: mounted filesystem with ordered data mode.
[   17.224000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   17.228000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   17.532000] Linux agpgart interface v0.102 (c) Dave Jones
[   17.564000] intel_rng: FWH not detected
[   17.896000] iTCO_vendor_support: vendor-support=0
[   17.900000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[   17.900000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0860)
[   17.900000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   18.212000] ieee80211_crypt: registered algorithm 'NULL'
[   18.380000] input: PC Speaker as /class/input/input3
[   18.416000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   18.416000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   18.448000] sdhci: Secure Digital Host Controller Interface driver
[   18.448000] sdhci: Copyright(c) Pierre Ossman
[   18.448000] sdhci: SDHCI controller found at 0000:06:01.1 [1180:0822] (rev 19)
[   18.448000] ACPI: PCI Interrupt 0000:06:01.1 -> GSI 17 (level, low) -> IRQ 17
[   18.448000] mmc0: SDHCI at 0xfeaff400 irq 17 DMA
[   18.540000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   18.568000] [fglrx] Maximum main memory to use for locked dma buffers: 1899 MBytes.
[   18.568000] [fglrx] ASYNCIO init succeed!
[   18.568000] [fglrx] PAT is enabled successfully!
[   18.572000] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[   18.620000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1
[   18.620000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[   18.620000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[   18.620000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[   18.620000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[   18.704000] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[   18.720000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[   18.720000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   18.748000] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[   20.188000] lp: driver loaded but no devices found
[   20.260000] Adding 1951856k swap on /dev/sda7.  Priority:-1 extents:1 across:1951856k
[   20.612000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[   20.904000] EXT3 FS on sda6, internal journal
[   28.588000] kjournald starting.  Commit interval 5 seconds
[   28.588000] EXT3 FS on sda8, internal journal
[   28.588000] EXT3-fs: mounted filesystem with ordered data mode.
[   29.912000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   29.948000] ACPI: Battery Slot [BAT0] (battery present)
[   29.968000] No dock devices found.
[   30.060000] ACPI: AC Adapter [AC0] (on-line)
[   30.076000] Asus Laptop ACPI Extras version 0.30
[   30.076000]   unsupported model F3JA, trying default values
[   30.076000]   send /proc/acpi/dsdt to the developers
[   30.136000] input: Power Button (FF) as /class/input/input5
[   30.136000] ACPI: Power Button (FF) [PWRF]
[   30.160000] input: Lid Switch as /class/input/input6
[   30.160000] ACPI: Lid Switch [liD]
[   30.160000] input: Power Button (CM) as /class/input/input7
[   30.160000] ACPI: Power Button (CM) [PWRB]
[   30.160000] input: Sleep Button (CM) as /class/input/input8
[   30.160000] ACPI: Sleep Button (CM) [SLPB]
[   31.392000] r8169: eth0: link down
[   31.444000] ppdev: user-space parallel port driver
[   31.860000] audit(1207949641.386:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5006 profile="/usr/sbin/cupsd"
[   31.940000] apm: BIOS not found.
[   33.952000] Failure registering capabilities with primary security module.
[   34.220000] Bluetooth: Core ver 2.11
[   34.220000] NET: Registered protocol family 31
[   34.220000] Bluetooth: HCI device and connection manager initialized
[   34.220000] Bluetooth: HCI socket layer initialized
[   34.232000] Bluetooth: L2CAP ver 2.8
[   34.232000] Bluetooth: L2CAP socket layer initialized
[   34.280000] Bluetooth: RFCOMM socket layer initialized
[   34.280000] Bluetooth: RFCOMM TTY layer initialized
[   34.280000] Bluetooth: RFCOMM ver 1.8
[   46.796000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   48.932000] [fglrx] Reserve Block - 0 offset =  0X1000000 length = 0X5000
[   48.932000] [fglrx] Reserve Block - 1 offset =  0X0 length = 0X1000000
[   48.932000] [fglrx] Reserve Block - 2 offset =  0Xffff000 length = 0X1000
[   48.932000] [fglrx] Reserve Block - 3 offset =  0Xffbf000 length = 0X40000
[   49.212000] [fglrx] interrupt source 10000000 successfully enabled
[   49.212000] [fglrx] enable ID = 0x00000008
[   49.212000] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[   67.228000] NET: Registered protocol family 17
[   77.616000] NET: Registered protocol family 10
[   77.616000] lo: Disabled Privacy Extensions
[   77.616000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   88.224000] eth1: no IPv6 routers present
[ 4294.484000] Bluetooth: BNEP (Ethernet Emulation) ver 1.2
[ 4294.484000] Bluetooth: BNEP filters: protocol multicast
[ 4294.496000] Bridge firewalling registered
[ 4504.120000] Bluetooth: HCI USB driver ver 2.9
[ 4504.120000] usbcore: registered new interface driver hci_usb
[ 4629.264000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 4631.024000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 4631.096000] r8169: eth0: link down
[ 4631.096000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4631.668000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 4642.144000] eth1: no IPv6 routers present
[ 4659.984000] eth1: no IPv6 routers present

Оффлайн Yuri77

  • Активист
  • *
  • Сообщений: 271
    • Просмотр профиля
Re: ASUS F3JA WEBCAM&Bluetooth
« Ответ #2 : 12 Апрель 2008, 11:41:08 »
Вроде устройство у вас определилось. Советую поставить следующие пакеты, если ещё не стоят, и попробовать снова:
sudo aptitude install bluez-utils gnome-bluetooth gnome-vfs-obexftp

Оффлайн 05091011

  • Автор темы
  • Новичок
  • *
  • Сообщений: 5
    • Просмотр профиля
Re: ASUS F3JA WEBCAM&Bluetooth
« Ответ #3 : 12 Апрель 2008, 12:51:59 »
Стоят. Переустановил- не помогло. Самое обидное что он работал. :P

Оффлайн Yuri77

  • Активист
  • *
  • Сообщений: 271
    • Просмотр профиля
Re: ASUS F3JA WEBCAM&Bluetooth
« Ответ #4 : 12 Апрель 2008, 18:58:53 »
Какие точно действия предпринимаете? Какие сообщения об ошибке выдаёт? Что после попытки добавляется в системных логах?

Оффлайн 05091011

  • Автор темы
  • Новичок
  • *
  • Сообщений: 5
    • Просмотр профиля
Re: ASUS F3JA WEBCAM&Bluetooth
« Ответ #5 : 16 Апрель 2008, 19:15:50 »
Поставил Ubuntu 7.10, включил остановленные службы, ввёл команду в консоли bluetooth start (не помню сейчас как точно пишется) и ничего не происходит. Значок в трее не появляется бук устройствами не обнаруживается, поиск устройств недоступен.

Ошибок не выдает. В девайс манагере устройсво установлено.

Оффлайн Yuri77

  • Активист
  • *
  • Сообщений: 271
    • Просмотр профиля
Re: ASUS F3JA WEBCAM&Bluetooth
« Ответ #6 : 21 Апрель 2008, 17:14:42 »
hciconfig что-нибудь пишет?

Оффлайн 05091011

  • Автор темы
  • Новичок
  • *
  • Сообщений: 5
    • Просмотр профиля
Re: ASUS F3JA WEBCAM&Bluetooth
« Ответ #7 : 23 Апрель 2008, 01:10:55 »
Можно не парится. В 8м RC всё работает. В ЧТ выходит. Сейчас фадора стоит. Мне не нравится. Хотя БТ тянет.

 

Страница сгенерирована за 0.063 секунд. Запросов: 22.