sudo smartctl -a /dev/sda
Password:
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-51-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke,
www.smartmontools.org=== START OF INFORMATION SECTION ===
Device Model: OCZ-ARC100
Serial Number: A22L1061521003582
LU WWN Device Id: 5 e83a97 10006b739
Firmware Version: 1.01
User Capacity: 240 057 409 536 bytes [240 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Oct 31 22:02:05 2015 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x1d) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 0) minutes.
Extended self-test routine
recommended polling time: ( 0) minutes.
SMART Attributes Data Structure revision number: 18
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0000 000 000 000 Old_age Offline - 0
9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 347
12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 43
171 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 80542544
174 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 32
195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 0
196 Reallocated_Event_Count 0x0000 100 100 000 Old_age Offline - 0
197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 0
208 Unknown_SSD_Attribute 0x0000 100 100 000 Old_age Offline - 12
210 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
224 Unknown_SSD_Attribute 0x0000 100 100 000 Old_age Offline - 1
233 Media_Wearout_Indicator 0x0000 100 100 000 Old_age Offline - 100
241 Total_LBAs_Written 0x0000 100 100 000 Old_age Offline - 808
242 Total_LBAs_Read 0x0000 100 100 000 Old_age Offline - 281
249 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 46529693
SMART Error Log Version: 1
No Errors Logged
Warning! SMART Self-Test Log Structure error: invalid SMART checksum.
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Selective Self-tests/Logging not supported