iPhone и Ubuntu ?

[mnemonix]

вот вопрос  вроде все стоит зависимости соблюдены но вот ошибка возникает такая idevicebackup: error while loading shared libraries: libimobiledevice.so.2 какие предложения по исправлению

[serjio]

Друзья помогите! Новичок в работе с Linux. Возникла жизненная проблема. У меня утеряны все контакты с телефона ("неудачная" синхронизация). В процессе использования libimobiledevice был сделан бэкап айфона (3.1.3, джейлбрейк), до того, как потерлись контакты естественно. Приложение libimobiledevice позволяет сделать восстановление, но в моем случае сделать восстановление не удалось. Вот что пишет терминал:

serjio@zulu:~$ idevicebackup restore /home/serjio/iPhone\ backup
Backup directory is "/home/serjio/iPhone backup"
Started "com.apple.mobilebackup" service on port 49932.
Reading Info.plist from backup.
Restoring backup is NOT IMPLEMENTED.
serjio@zulu:~$

Помогите, пожалуйста, восстановить контакты!

[Phiroman]

что-то никак пакет собрать не могу

phiroman@ex-machina:~/ideviceinstaller$ make
make  all-recursive
make[1]: Вход в каталог `/home/phiroman/ideviceinstaller'
Making all in src
make[2]: Вход в каталог `/home/phiroman/ideviceinstaller/src'
  CC     ideviceinstaller-ideviceinstaller.o
  CCLD   ideviceinstaller
make[2]: Выход из каталога `/home/phiroman/ideviceinstaller/src'
Making all in man
make[2]: Вход в каталог `/home/phiroman/ideviceinstaller/man'
make[2]: Цель `all' не требует выполнения команд.
make[2]: Выход из каталога `/home/phiroman/ideviceinstaller/man'
make[2]: Вход в каталог `/home/phiroman/ideviceinstaller'
make[2]: Выход из каталога `/home/phiroman/ideviceinstaller'
make[1]: Выход из каталога `/home/phiroman/ideviceinstaller'

Поделитесь готовым пакетом, если не жалко, илил скажите как правильно собрать

[Чистый]

что-то никак пакет собрать не могу

phiroman@ex-machina:~/ideviceinstaller$ make
make  all-recursive
make[1]: Вход в каталог `/home/phiroman/ideviceinstaller'
Making all in src
make[2]: Вход в каталог `/home/phiroman/ideviceinstaller/src'
  CC     ideviceinstaller-ideviceinstaller.o
  CCLD   ideviceinstaller
make[2]: Выход из каталога `/home/phiroman/ideviceinstaller/src'
Making all in man
make[2]: Вход в каталог `/home/phiroman/ideviceinstaller/man'
make[2]: Цель `all' не требует выполнения команд.
make[2]: Выход из каталога `/home/phiroman/ideviceinstaller/man'
make[2]: Вход в каталог `/home/phiroman/ideviceinstaller'
make[2]: Выход из каталога `/home/phiroman/ideviceinstaller'
make[1]: Выход из каталога `/home/phiroman/ideviceinstaller'

Поделитесь готовым пакетом, если не жалко, илил скажите как правильно собрать

это весь вывод ?

[Phiroman]

ну, я опустил вывод autogen.sh и ./configure, так как там ничего интересного.

(Нажмите, чтобы показать/скрыть)

phiroman@ex-machina:~/Source/ideviceinstaller-master$ sh autogen.sh
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking whether gcc and cc understand -c and -o together... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for libimobiledevice... yes
checking for libimobiledevice10... yes
checking for libimobiledevice11... no
checking for libplist... yes
checking for libzip... yes
checking for ANSI C header files... (cached) yes
checking for stdint.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking for ssize_t... yes
checking for uint16_t... yes
checking for uint32_t... yes
checking for uint8_t... yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible realloc... yes
checking for strcasecmp... yes
checking for strdup... yes
checking for strerror... yes
checking for strndup... yes
checking for supported compiler flags...  -Wall -Wextra -Wmissing-declarations -Wredundant-decls -Wshadow -Wpointer-arith -Wwrite-strings -Wswitch-default -Wno-unused-parameter -Werror -g
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating man/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands

(Нажмите, чтобы показать/скрыть)

phiroman@ex-machina:~/Source/ideviceinstaller-master$ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking whether gcc and cc understand -c and -o together... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for libimobiledevice... yes
checking for libimobiledevice10... yes
checking for libimobiledevice11... no
checking for libplist... yes
checking for libzip... yes
checking for ANSI C header files... (cached) yes
checking for stdint.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking for ssize_t... yes
checking for uint16_t... yes
checking for uint32_t... yes
checking for uint8_t... yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible realloc... yes
checking for strcasecmp... yes
checking for strdup... yes
checking for strerror... yes
checking for strndup... yes
checking for supported compiler flags...  -Wall -Wextra -Wmissing-declarations -Wredundant-decls -Wshadow -Wpointer-arith -Wwrite-strings -Wswitch-default -Wno-unused-parameter -Werror -g
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating man/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands

[Чистый]

для начала попробоуете установить все зависимости что необходимы:

Код: [Выделить]

sudo apt-get install libtool automake autoconf git-core swig build-essential python-dev libusbmuxd-dev libglib2.0-dev libgnutls-dev libplist-dev libplist++-dev libplist++1 libzip-dev libclutter-1.0-dev libclutter-gtk-0.10-dev intltool
а после повторите все и посмотрите что опять показывает и еще у вас  libimobiledevice установлен?

[Phiroman]

да, все зависимости на месте, libimobiledevice, само собой, установлен..

[rigoler]

интересно, а для IPad'а все описанное выше сгодится?

[gwk]

ideviceinstaller -i programs.ipa
?
что любую ipa так можно установить?
и нет никакой необходимость джейлбрейкать ipad?

[Чистый]

ideviceinstaller -i programs.ipa
?
что любую ipa так можно установить?
и нет никакой необходимость джейлбрейкать ipad?

без jailbreack вы не установите крякнутую программу а бесплатные да можно и без jail ставить

[AHHA]

у меня ipod shuffle, и для работы с ним я скачала gtkpod. Была очень им довольна, ведь другие программы не рабатали с плеером. НО.....спустя 5 дней я вошла в программу, и она стала жутко тупить, точнее, когда я проверяла на плеере файлы, то программа зависала, и приходилось ее выключать. Вот теперь не знаю, что делать...подскажите что-нибудь

[dobryxa]

Ubuntu 10.4 не видит iустройства с прошивкой 4.2.1 , на аппаратах сделан джэйл. Раньше на прошивках 3.x наутилиус сразу находил монтировал устройства, сейчас не видит. Пробовал imobiledevice переустанавливать, там у них вроде заявленна поддержка 4.2.1 безрезультатно! Может есть решение данной проблемы? Или это только у меня такие проблемы?

[neonox]

У меня тоже не монтируется с 4.2.1, но мне особо не надо, так что искал причину

[thermite]

У меня проблема, не могу установить ideviceinstaller, libmobiledevice незнаю где взять, если он есть, но вроде я скачивал, пользуясь ранне написанный кем то сообщением в этой теме. Вот
autogen.sh

(Нажмите, чтобы показать/скрыть)

bash autogen.sh
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking whether gcc and cc understand -c and -o together... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for libimobiledevice... yes
checking for libimobiledevice10... yes
checking for libimobiledevice11... no
checking for libplist... yes
checking for libzip... yes
checking for ANSI C header files... (cached) yes
checking for stdint.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking for ssize_t... yes
checking for uint16_t... yes
checking for uint32_t... yes
checking for uint8_t... yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible realloc... yes
checking for strcasecmp... yes
checking for strdup... yes
checking for strerror... yes
checking for strndup... yes
checking for supported compiler flags...  -Wall -Wextra -Wmissing-declarations -Wredundant-decls -Wshadow -Wpointer-arith -Wwrite-strings -Wswitch-default -Wno-unused-parameter -Werror -g
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating man/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands

Вот ./configure

(Нажмите, чтобы показать/скрыть)

checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking whether gcc and cc understand -c and -o together... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for libimobiledevice... yes
checking for libimobiledevice10... yes
checking for libimobiledevice11... no
checking for libplist... yes
checking for libzip... yes
checking for ANSI C header files... (cached) yes
checking for stdint.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking for ssize_t... yes
checking for uint16_t... yes
checking for uint32_t... yes
checking for uint8_t... yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible realloc... yes
checking for strcasecmp... yes
checking for strdup... yes
checking for strerror... yes
checking for strndup... yes
checking for supported compiler flags...  -Wall -Wextra -Wmissing-declarations -Wredundant-decls -Wshadow -Wpointer-arith -Wwrite-strings -Wswitch-default -Wno-unused-parameter -Werror -g
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating man/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands

Вот make = на нем и всё закончилось 

(Нажмите, чтобы показать/скрыть)

(CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /home/thermite/ideviceinstaller/missing --run autoheader)
rm -f stamp-h1
touch config.h.in
cd . && /bin/bash ./config.status config.h
config.status: creating config.h
config.status: config.h is unchanged
make  all-recursive
make[1]: Вход в каталог `/home/thermite/ideviceinstaller'
Making all in src
make[2]: Вход в каталог `/home/thermite/ideviceinstaller/src'
make[2]: Цель `all' не требует выполнения команд.
make[2]: Выход из каталога `/home/thermite/ideviceinstaller/src'
Making all in man
make[2]: Вход в каталог `/home/thermite/ideviceinstaller/man'
make[2]: Цель `all' не требует выполнения команд.
make[2]: Выход из каталога `/home/thermite/ideviceinstaller/man'
make[2]: Вход в каталог `/home/thermite/ideviceinstaller'
make[2]: Выход из каталога `/home/thermite/ideviceinstaller'
make[1]: Выход из каталога `/home/thermite/ideviceinstaller'

Что мне нужно сделать! ?
Пользователь решил продолжить мысль 01 Марта 2011, 22:08:36:Или работает все? ) ввел ideviseinstaller && и все работает! ) Ура!

[Чистый]

так в make и нет никаких ошибок, так что все должно работать, что и происходит судя по сообщению